2018-07-04 19:01:03 -04:00
/*********************************************************************
* SEGGER Microcontroller GmbH & Co . KG *
* The Embedded Experts *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* ( c ) 2015 - 2017 SEGGER Microcontroller GmbH & Co . KG *
* *
* www . segger . com Support : support @ segger . com *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* SEGGER SystemView * Real - time application analysis *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* All rights reserved . *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J - Link . *
* *
* Redistribution and use in source and binary forms , with or *
* without modification , are permitted provided that the following *
* conditions are met : *
* *
* o Redistributions of source code must retain the above copyright *
* notice , this list of conditions and the following disclaimer . *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice , this list of conditions and the following *
* disclaimer in the documentation and / or other materials provided *
* with the distribution . *
* *
* o Neither the name of SEGGER Microcontroller GmbH & Co . KG *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission . *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS " AS IS " AND ANY EXPRESS OR IMPLIED WARRANTIES , *
* INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED . IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT , INDIRECT , INCIDENTAL , SPECIAL , EXEMPLARY , OR *
* CONSEQUENTIAL DAMAGES ( INCLUDING , BUT NOT LIMITED TO , PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES ; LOSS OF USE , DATA , OR PROFITS ; *
* OR BUSINESS INTERRUPTION ) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TORT *
* ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE . *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* SystemView version : V2 .42 *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- - - - - - - - - - - - - - - - - - - - - - - - - - END - OF - HEADER - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
File : SEGGER_SYSVIEW . c
Purpose : System visualization API implementation .
Revision : $ Rev : 5927 $
Additional information :
Packet format :
Packets with IDs 0. .23 are standard packets with known structure .
For efficiency , they do * NOT * contain a length field .
< ID > < Data > < TimeStampDelta >
Packets with IDs 24. .31 are standard packets with extendible
structure and contain a length field .
< ID > < Lenght > < Data > < TimeStampDelta >
Packets with IDs > = 32 always contain a length field .
< ID > < Length > < Data > < TimeStampDelta >
Packet IDs :
0. . 31 : Standard packets , known by SystemViewer .
32. .1023 : OS - definable packets , described in a SystemView description file .
1024. .2047 : User - definable packets , described in a SystemView description file .
2048. .32767 : Undefined .
Data encoding :
Basic types ( int , short , char , . . . ) :
Basic types are encoded little endian with most - significant bit variant
encoding .
Each encoded byte contains 7 data bits [ 6 : 0 ] and the MSB continuation bit .
The continuation bit indicates whether the next byte belongs to the data
( bit set ) or this is the last byte ( bit clear ) .
The most significant bits of data are encoded first , proceeding to the
least significant bits in the final byte ( little endian ) .
Example encoding :
Data : 0x1F4 ( 500 )
Encoded : 0xF4 ( First 7 data bits 74 | Continuation bit )
0x03 ( Second 7 data bits 03 , no continuation )
Data : 0xFFFFFFFF
Encoded : 0xFF 0xFF 0xFF 0xFF 0x0F
Data : 0xA2 ( 162 ) , 0x03 ( 3 ) , 0x7000
Encoded : 0xA2 0x01 0x03 0x80 0xE0 0x01
Byte arrays and strings :
Byte arrays and strings are encoded as < NumBytes > followed by the raw data .
NumBytes is encoded as a basic type with a theoretical maximum of 4 G .
Example encoding :
Data : " Hello World \0 " ( 0x48 0x65 0x6C 0x6C 0x6F 0x20 0x57 0x6F 0x72 0x6C 0x64 0x00 )
Encoded : 0x0B 0x48 0x65 0x6C 0x6C 0x6F 0x20 0x57 0x6F 0x72 0x6C 0x64
Examples packets :
01 F4 03 80 80 10 // Overflow packet. Data is a single U32.
This packet means : 500 packets lost , Timestamp is 0x40000
02 0F 50 // ISR(15) Enter. Timestamp 80 (0x50)
03 20 // ISR Exit. Timestamp 32 (0x20) (Shortest possible packet.)
Sample code for user defined Packets :
# define MY_ID 0x400 // Any value between 0x400 and 0x7FF
void SendMyPacket ( unsigned Para0 , unsigned Para1 , const char * s ) {
U8 aPacket [ SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + MAX_STR_LEN + 1 ] ;
U8 * pPayload ;
//
pPayload = SEGGER_SYSVIEW_PPREPARE_PACKET ( aPacket ) ; // Prepare the packet for SystemView
pPayload = SEGGER_SYSVIEW_EncodeU32 ( pPayload , Para0 ) ; // Add the first parameter to the packet
pPayload = SEGGER_SYSVIEW_EncodeU32 ( pPayload , Para1 ) ; // Add the second parameter to the packet
pPayload = SEGGER_SYSVIEW_EncodeString ( pPayload , s , MAX_STR_LEN ) ; // Add the string to the packet
//
SEGGER_SYSVIEW_SendPacket ( & aPacket [ 0 ] , pPayload , MY_ID ) ; // Send the packet with EventId = MY_ID
}
# define MY_ID_1 0x401
void SendOnePara ( unsigned Para0 ) {
SEGGER_SYSVIEW_RecordU32 ( MY_ID_1 , Para0 ) ;
}
*/
/*********************************************************************
*
* # include section
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# include "SEGGER_SYSVIEW_Int.h"
# include "SEGGER_RTT.h"
# include <string.h>
# include <stdlib.h>
# include <stdarg.h>
/*********************************************************************
*
* Defines , fixed
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# if SEGGER_SYSVIEW_ID_SHIFT
# define SHRINK_ID(Id) (((Id) - _SYSVIEW_Globals.RAMBaseAddress) >> SEGGER_SYSVIEW_ID_SHIFT)
# else
# define SHRINK_ID(Id) ((Id) - _SYSVIEW_Globals.RAMBaseAddress)
# endif
# if SEGGER_SYSVIEW_RTT_CHANNEL > 0
# define CHANNEL_ID_UP SEGGER_SYSVIEW_RTT_CHANNEL
# define CHANNEL_ID_DOWN SEGGER_SYSVIEW_RTT_CHANNEL
# else
# define CHANNEL_ID_UP _SYSVIEW_Globals.UpChannel
# define CHANNEL_ID_DOWN _SYSVIEW_Globals.DownChannel
# endif
/*********************************************************************
*
* Defines , configurable
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
// Timestamps may be less than full 32-bits, in which case we need to zero
// the unused bits to properly handle overflows.
// Note that this is a quite common scenario, as a 32-bit time such as
// SysTick might be scaled down to reduce bandwith
// or a 16-bit hardware time might be used.
# if SEGGER_SYSVIEW_TIMESTAMP_BITS < 32 // Eliminate unused bits in case hardware timestamps are less than 32 bits
# define MAKE_DELTA_32BIT(Delta) Delta <<= 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS; \
Delta > > = 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS ;
# else
# define MAKE_DELTA_32BIT(Delta)
# endif
/*********************************************************************
*
* Defines , fixed
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# define ENABLE_STATE_OFF 0
# define ENABLE_STATE_ON 1
# define ENABLE_STATE_DROPPING 2
# define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0)
# define FORMAT_FLAG_PAD_ZERO (1u << 1)
# define FORMAT_FLAG_PRINT_SIGN (1u << 2)
# define FORMAT_FLAG_ALTERNATE (1u << 3)
# define MODULE_EVENT_OFFSET (512)
/*********************************************************************
*
* Types , local
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
typedef struct {
U8 * pBuffer ;
U8 * pPayload ;
U8 * pPayloadStart ;
U32 Options ;
unsigned Cnt ;
} SEGGER_SYSVIEW_PRINTF_DESC ;
typedef struct {
U8 EnableState ; // 0: Disabled, 1: Enabled, (2: Dropping)
U8 UpChannel ;
U8 RecursionCnt ;
U32 SysFreq ;
U32 CPUFreq ;
U32 LastTxTimeStamp ;
U32 RAMBaseAddress ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
U32 PacketCount ;
# else
U32 DropCount ;
U8 DownChannel ;
# endif
U32 DisabledEvents ;
const SEGGER_SYSVIEW_OS_API * pOSAPI ;
SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC * pfSendSysDesc ;
} SEGGER_SYSVIEW_GLOBALS ;
/*********************************************************************
*
* Function prototypes , required
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
static void _SendPacket ( U8 * pStartPacket , U8 * pEndPacket , unsigned int EventId ) ;
/*********************************************************************
*
* Static data
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
static const U8 _abSync [ 10 ] = { 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 } ;
# ifdef SEGGER_SYSVIEW_SECTION
# if (defined __GNUC__)
__attribute__ ( ( section ( SEGGER_SYSVIEW_SECTION ) ) ) static char _UpBuffer [ SEGGER_SYSVIEW_RTT_BUFFER_SIZE ] ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
__attribute__ ( ( section ( SEGGER_SYSVIEW_SECTION ) ) ) static char _DownBuffer [ 8 ] ; // Small, fixed-size buffer, for back-channel comms
# endif
# elif (defined __ICCARM__) || (defined __ICCRX__)
# pragma location=SEGGER_SYSVIEW_SECTION
static char _UpBuffer [ SEGGER_SYSVIEW_RTT_BUFFER_SIZE ] ;
# pragma location=SEGGER_SYSVIEW_SECTION
static char _DownBuffer [ 8 ] ; // Small, fixed-size buffer, for back-channel comms
# elif (defined __CC_ARM)
__attribute__ ( ( section ( SEGGER_SYSVIEW_SECTION ) , zero_init ) ) static char _UpBuffer [ SEGGER_SYSVIEW_RTT_BUFFER_SIZE ] ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
__attribute__ ( ( section ( SEGGER_SYSVIEW_SECTION ) , zero_init ) ) static char _DownBuffer [ 8 ] ; // Small, fixed-size buffer, for back-channel comms
# endif
# else
static char _UpBuffer [ SEGGER_SYSVIEW_RTT_BUFFER_SIZE ] ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
static char _DownBuffer [ 8 ] ; // Small, fixed-size buffer, for back-channel comms
# endif
# endif
# else
static char _UpBuffer [ SEGGER_SYSVIEW_RTT_BUFFER_SIZE ] ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
static char _DownBuffer [ 8 ] ; // Small, fixed-size buffer, for back-channel comms
# endif
# endif
static SEGGER_SYSVIEW_GLOBALS _SYSVIEW_Globals ;
static SEGGER_SYSVIEW_MODULE * _pFirstModule ;
static U8 _NumModules ;
/*********************************************************************
*
* Static code
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# define ENCODE_U32(pDest, Value) { \
U8 * pSysviewPointer ; \
U32 SysViewData ; \
pSysviewPointer = pDest ; \
SysViewData = Value ; \
while ( SysViewData > 0x7F ) { \
* pSysviewPointer + + = ( U8 ) ( SysViewData | 0x80 ) ; \
SysViewData > > = 7 ; \
} ; \
* pSysviewPointer + + = ( U8 ) SysViewData ; \
pDest = pSysviewPointer ; \
} ;
# if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1)
static U8 _aPacket [ SEGGER_SYSVIEW_MAX_PACKET_SIZE ] ;
# define RECORD_START(PacketSize) SEGGER_SYSVIEW_LOCK(); \
pPayloadStart = _PreparePacket ( _aPacket ) ;
# define RECORD_END() SEGGER_SYSVIEW_UNLOCK()
# else
# define RECORD_START(PacketSize) U8 aPacket[(PacketSize)]; \
pPayloadStart = _PreparePacket ( aPacket ) ; \
# define RECORD_END()
# endif
/*********************************************************************
*
* _EncodeData ( )
*
* Function description
* Encode a byte buffer in variable - length format .
*
* Parameters
* pPayload - Pointer to where string will be encoded .
* pSrc - Pointer to data buffer to be encoded .
* NumBytes - Number of bytes in the buffer to be encoded .
*
* Return value
* Pointer to the byte following the value , i . e . the first free
* byte in the payload and the next position to store payload
* content .
*
* Additional information
* The data is encoded as a count byte followed by the contents
* of the data buffer .
* Make sure NumBytes + 1 bytes are free for the payload .
*/
static U8 * _EncodeData ( U8 * pPayload , const char * pSrc , unsigned int NumBytes ) {
unsigned int n ;
//
n = 0 ;
* pPayload + + = NumBytes ;
while ( n < NumBytes ) {
* pPayload + + = * pSrc + + ;
n + + ;
}
return pPayload ;
}
/*********************************************************************
*
* _EncodeStr ( )
*
* Function description
* Encode a string in variable - length format .
*
* Parameters
* pPayload - Pointer to where string will be encoded .
* pText - String to encode .
* Limit - Maximum number of characters to encode from string .
*
* Return value
* Pointer to the byte following the value , i . e . the first free
* byte in the payload and the next position to store payload
* content .
*
* Additional information
* The string is encoded as a count byte followed by the contents
* of the string .
* No more than 1 + Limit bytes will be encoded to the payload .
*/
static U8 * _EncodeStr ( U8 * pPayload , const char * pText , unsigned int Limit ) {
unsigned int n ;
unsigned int Len ;
//
// Compute string len
//
Len = 0 ;
while ( * ( pText + Len ) ! = 0 ) {
Len + + ;
}
if ( Len > Limit ) {
Len = Limit ;
}
//
// Write Len
//
if ( Len < 255 ) {
2020-11-10 02:40:01 -05:00
* pPayload + + = Len ;
2018-07-04 19:01:03 -04:00
} else {
* pPayload + + = 255 ;
* pPayload + + = ( Len & 255 ) ;
* pPayload + + = ( ( Len > > 8 ) & 255 ) ;
}
//
// copy string
//
n = 0 ;
while ( n < Len ) {
* pPayload + + = * pText + + ;
n + + ;
}
return pPayload ;
}
/*********************************************************************
*
* _PreparePacket ( )
*
* Function description
* Prepare a SystemView event packet header .
*
* Parameters
* pPacket - Pointer to start of packet to initialize .
*
* Return value
* Pointer to first byte of packet payload .
*
* Additional information
* The payload length and evnetId are not initialized .
* PreparePacket only reserves space for them and they are
* computed and filled in by the sending function .
*/
static U8 * _PreparePacket ( U8 * pPacket ) {
return pPacket + 4 ;
}
/*********************************************************************
*
* _HandleIncomingPacket ( )
*
* Function description
* Read an incoming command from the down channel and process it .
*
* Additional information
* This function is called each time after sending a packet .
* Processing incoming packets is done asynchronous . SystemView might
* already have sent event packets after the host has sent a command .
*/
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
static void _HandleIncomingPacket ( void ) {
U8 Cmd ;
int Status ;
//
Status = SEGGER_RTT_ReadNoLock ( CHANNEL_ID_DOWN , & Cmd , 1 ) ;
if ( Status > 0 ) {
switch ( Cmd ) {
case SEGGER_SYSVIEW_COMMAND_ID_START :
SEGGER_SYSVIEW_Start ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_STOP :
SEGGER_SYSVIEW_Stop ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_GET_SYSTIME :
SEGGER_SYSVIEW_RecordSystime ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_GET_TASKLIST :
SEGGER_SYSVIEW_SendTaskList ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_GET_SYSDESC :
SEGGER_SYSVIEW_GetSysDesc ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_GET_NUMMODULES :
SEGGER_SYSVIEW_SendNumModules ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_GET_MODULEDESC :
SEGGER_SYSVIEW_SendModuleDescription ( ) ;
break ;
case SEGGER_SYSVIEW_COMMAND_ID_GET_MODULE :
Status = SEGGER_RTT_ReadNoLock ( CHANNEL_ID_DOWN , & Cmd , 1 ) ;
if ( Status > 0 ) {
SEGGER_SYSVIEW_SendModule ( Cmd ) ;
}
break ;
default :
if ( Cmd > = 128 ) { // Unknown extended command. Dummy read its parameter.
SEGGER_RTT_ReadNoLock ( CHANNEL_ID_DOWN , & Cmd , 1 ) ;
}
break ;
}
}
}
# endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
/*********************************************************************
*
* _TrySendOverflowPacket ( )
*
* Function description
* Try to transmit an SystemView Overflow packet containing the
* number of dropped packets .
*
* Additional information
* Format as follows :
* 01 < DropCnt > < TimeStamp > Max . packet len is 1 + 5 + 5 = 11
*
* Example packets sent
* 01 20 40
*
* Return value
* ! = 0 : Success , Message sent ( stored in RTT - Buffer )
* = = 0 : Buffer full , Message * NOT * stored
*
*/
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
static int _TrySendOverflowPacket ( void ) {
U32 TimeStamp ;
I32 Delta ;
int Status ;
U8 aPacket [ 11 ] ;
U8 * pPayload ;
aPacket [ 0 ] = SYSVIEW_EVTID_OVERFLOW ; // 1
pPayload = & aPacket [ 1 ] ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . DropCount ) ;
//
// Compute time stamp delta and append it to packet.
//
TimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP ( ) ;
Delta = TimeStamp - _SYSVIEW_Globals . LastTxTimeStamp ;
MAKE_DELTA_32BIT ( Delta ) ;
ENCODE_U32 ( pPayload , Delta ) ;
//
// Try to store packet in RTT buffer and update time stamp when this was successful
//
Status = SEGGER_RTT_WriteSkipNoLock ( CHANNEL_ID_UP , aPacket , pPayload - aPacket ) ;
if ( Status ) {
_SYSVIEW_Globals . LastTxTimeStamp = TimeStamp ;
_SYSVIEW_Globals . EnableState - - ; // EnableState has been 2, will be 1. Always.
} else {
_SYSVIEW_Globals . DropCount + + ;
}
//
return Status ;
}
# endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
/*********************************************************************
*
* _SendSyncInfo ( )
*
* Function description
2020-11-10 02:40:01 -05:00
* Send SystemView sync packet and system information in
2018-07-04 19:01:03 -04:00
* post mortem mode .
*
* Additional information
* Sync is 10 * 0x00 without timestamp
*/
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
static void _SendSyncInfo ( void ) {
//
// Add sync packet ( 10 * 0x00)
// Send system description
// Send system time
// Send task list
// Send module description
// Send module information
//
SEGGER_RTT_WriteWithOverwriteNoLock ( CHANNEL_ID_UP , _abSync , 10 ) ;
SEGGER_SYSVIEW_RecordVoid ( SYSVIEW_EVTID_TRACE_START ) ;
{
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . SysFreq ) ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . CPUFreq ) ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . RAMBaseAddress ) ;
ENCODE_U32 ( pPayload , SEGGER_SYSVIEW_ID_SHIFT ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_INIT ) ;
RECORD_END ( ) ;
}
if ( _SYSVIEW_Globals . pfSendSysDesc ) {
_SYSVIEW_Globals . pfSendSysDesc ( ) ;
}
SEGGER_SYSVIEW_RecordSystime ( ) ;
SEGGER_SYSVIEW_SendTaskList ( ) ;
if ( _NumModules > 0 ) {
SEGGER_SYSVIEW_SendNumModules ( ) ;
for ( int n = 0 ; n < _NumModules ; n + + ) {
SEGGER_SYSVIEW_SendModule ( n ) ;
}
SEGGER_SYSVIEW_SendModuleDescription ( ) ;
}
}
# endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
/*********************************************************************
*
* _SendPacket ( )
*
* Function description
* Send a SystemView packet over RTT . RTT channel and mode are
* configured by macros when the SystemView component is initialized .
* This function takes care of maintaining the packet drop count
* and sending overflow packets when necessary .
* The packet must be passed without Id and Length because this
* function prepends it to the packet before transmission .
*
* Parameters
* pStartPacket - Pointer to start of packet payload .
* There must be at least 4 bytes free to prepend Id and Length .
* pEndPacket - Pointer to end of packet payload .
* EventId - Id of the event to send .
*
*/
static void _SendPacket ( U8 * pStartPacket , U8 * pEndPacket , unsigned int EventId ) {
unsigned int NumBytes ;
U32 TimeStamp ;
U32 Delta ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1)
int Status ;
# endif
# if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0)
SEGGER_SYSVIEW_LOCK ( ) ;
# endif
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
if ( _SYSVIEW_Globals . EnableState = = 0 ) {
goto SendDone ;
}
# else
if ( _SYSVIEW_Globals . EnableState = = 1 ) { // Enabled, no dropped packets remaining
goto Send ;
}
if ( _SYSVIEW_Globals . EnableState = = 0 ) {
goto SendDone ;
}
//
// Handle buffer full situations:
// Have packets been dropped before because buffer was full?
// In this case try to send and overflow packet.
//
if ( _SYSVIEW_Globals . EnableState = = 2 ) {
_TrySendOverflowPacket ( ) ;
if ( _SYSVIEW_Globals . EnableState ! = 1 ) {
goto SendDone ;
}
}
Send :
# endif
//
// Check if event is disabled from being recorded.
//
if ( EventId < 32 ) {
if ( _SYSVIEW_Globals . DisabledEvents & ( ( U32 ) 1u < < EventId ) ) {
goto SendDone ;
}
}
//
// Prepare actual packet.
// If it is a known packet, prepend eventId only,
// otherwise prepend packet length and eventId.
//
if ( EventId < 24 ) {
* - - pStartPacket = EventId ;
} else {
NumBytes = pEndPacket - pStartPacket ;
if ( NumBytes > 127 ) {
* - - pStartPacket = ( NumBytes > > 7 ) ;
* - - pStartPacket = NumBytes | 0x80 ;
} else {
* - - pStartPacket = NumBytes ;
}
if ( EventId > 127 ) {
* - - pStartPacket = ( EventId > > 7 ) ;
* - - pStartPacket = EventId | 0x80 ;
} else {
* - - pStartPacket = EventId ;
}
}
//
// Compute time stamp delta and append it to packet.
//
TimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP ( ) ;
Delta = TimeStamp - _SYSVIEW_Globals . LastTxTimeStamp ;
MAKE_DELTA_32BIT ( Delta ) ;
ENCODE_U32 ( pEndPacket , Delta ) ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
//
// Store packet in RTT buffer by overwriting old data and update time stamp
//
SEGGER_RTT_WriteWithOverwriteNoLock ( CHANNEL_ID_UP , pStartPacket , pEndPacket - pStartPacket ) ;
_SYSVIEW_Globals . LastTxTimeStamp = TimeStamp ;
# else
//
// Try to store packet in RTT buffer and update time stamp when this was successful
//
Status = SEGGER_RTT_WriteSkipNoLock ( CHANNEL_ID_UP , pStartPacket , pEndPacket - pStartPacket ) ;
if ( Status ) {
_SYSVIEW_Globals . LastTxTimeStamp = TimeStamp ;
} else {
_SYSVIEW_Globals . EnableState + + ; // EnableState has been 1, will be 2. Always.
}
# endif
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
//
// Add sync and system information periodically if we are in post mortem mode
//
if ( _SYSVIEW_Globals . RecursionCnt = = 0 ) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that.
_SYSVIEW_Globals . RecursionCnt = 1 ;
if ( _SYSVIEW_Globals . PacketCount + + & ( 1 < < SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT ) ) {
_SendSyncInfo ( ) ;
_SYSVIEW_Globals . PacketCount = 0 ;
}
_SYSVIEW_Globals . RecursionCnt = 0 ;
}
SendDone :
; // Avoid "label at end of compound statement" error when using static buffer
# else
SendDone :
//
// Check if host is sending data which needs to be processed.
// Note that since this code is called for every packet, it is very time critical, so we do
// only what is really needed here, which is checking if there is any data
//
if ( SEGGER_RTT_HASDATA ( CHANNEL_ID_DOWN ) ) {
if ( _SYSVIEW_Globals . RecursionCnt = = 0 ) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that.
_SYSVIEW_Globals . RecursionCnt = 1 ;
_HandleIncomingPacket ( ) ;
_SYSVIEW_Globals . RecursionCnt = 0 ;
}
}
# endif
//
# if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0)
SEGGER_SYSVIEW_UNLOCK ( ) ; // We are done. Unlock and return
# endif
}
# ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list
/*********************************************************************
*
* _APrintHost ( )
*
* Function description
* Prepares a string and its parameters to be formatted on the host .
*
* Parameters
* s Pointer to format string .
* Options Options to be sent to the host .
* pArguments Pointer to array of arguments for the format string .
* NumArguments Number of arguments in the array .
*/
static void _APrintHost ( const char * s , U32 Options , U32 * pArguments , U32 NumArguments ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32 ) ;
pPayload = _EncodeStr ( pPayloadStart , s , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
ENCODE_U32 ( pPayload , Options ) ;
ENCODE_U32 ( pPayload , NumArguments ) ;
while ( NumArguments - - ) {
ENCODE_U32 ( pPayload , ( * pArguments + + ) ) ;
}
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_PRINT_FORMATTED ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* _VPrintHost ( )
*
* Function description
* Prepares a string and its parameters to be formatted on the host .
*
* Parameters
* s Pointer to format string .
* Options Options to be sent to the host .
* pParamList Pointer to the list of arguments for the format string .
*/
static void _VPrintHost ( const char * s , U32 Options , va_list * pParamList ) {
U32 aParas [ SEGGER_SYSVIEW_MAX_ARGUMENTS ] ;
U32 NumArguments ;
const char * p ;
2020-11-10 02:40:01 -05:00
2018-07-04 19:01:03 -04:00
p = s ;
NumArguments = 0 ;
while ( * p ) {
if ( * p = = ' % ' ) {
aParas [ NumArguments + + ] = va_arg ( * pParamList , int ) ;
if ( NumArguments = = SEGGER_SYSVIEW_MAX_ARGUMENTS ) {
break ;
}
}
p + + ;
}
_APrintHost ( s , Options , aParas , NumArguments ) ;
}
/*********************************************************************
*
* _StoreChar ( )
*
* Function description
* Stores a character in the printf - buffer and sends the buffer when
* it is filled .
*
* Parameters
* p Pointer to the buffer description .
* c Character to be printed .
*/
static void _StoreChar ( SEGGER_SYSVIEW_PRINTF_DESC * p , char c ) {
unsigned int Cnt ;
U8 * pPayload ;
U32 Options ;
Cnt = p - > Cnt ;
if ( ( Cnt + 1u ) < = SEGGER_SYSVIEW_MAX_STRING_LEN ) {
* ( p - > pPayload + + ) = c ;
p - > Cnt = Cnt + 1u ;
}
//
// Write part of string, when the buffer is full
//
if ( p - > Cnt = = SEGGER_SYSVIEW_MAX_STRING_LEN ) {
* ( p - > pPayloadStart ) = p - > Cnt ;
pPayload = p - > pPayload ;
Options = p - > Options ;
ENCODE_U32 ( pPayload , Options ) ;
ENCODE_U32 ( pPayload , 0 ) ;
_SendPacket ( p - > pPayloadStart , pPayload , SYSVIEW_EVTID_PRINT_FORMATTED ) ;
p - > pPayloadStart = _PreparePacket ( p - > pBuffer ) ;
p - > pPayload = p - > pPayloadStart + 1u ;
p - > Cnt = 0u ;
}
}
/*********************************************************************
*
* _PrintUnsigned ( )
*
* Function description
* Print an unsigned integer with the given formatting into the
* formatted string .
*
* Parameters
* pBufferDesc Pointer to the buffer description .
* v Value to be printed .
* Base Base of the value .
* NumDigits Number of digits to be printed .
* FieldWidth Width of the printed field .
* FormatFlags Flags for formatting the value .
*/
static void _PrintUnsigned ( SEGGER_SYSVIEW_PRINTF_DESC * pBufferDesc , unsigned int v , unsigned int Base , unsigned int NumDigits , unsigned int FieldWidth , unsigned int FormatFlags ) {
static const char _aV2C [ 16 ] = { ' 0 ' , ' 1 ' , ' 2 ' , ' 3 ' , ' 4 ' , ' 5 ' , ' 6 ' , ' 7 ' , ' 8 ' , ' 9 ' , ' A ' , ' B ' , ' C ' , ' D ' , ' E ' , ' F ' } ;
unsigned int Div ;
unsigned int Digit ;
unsigned int Number ;
unsigned int Width ;
char c ;
Number = v ;
Digit = 1u ;
//
// Get actual field width
//
Width = 1u ;
while ( Number > = Base ) {
Number = ( Number / Base ) ;
Width + + ;
}
if ( NumDigits > Width ) {
Width = NumDigits ;
}
//
// Print leading chars if necessary
//
if ( ( FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY ) = = 0u ) {
if ( FieldWidth ! = 0u ) {
if ( ( ( FormatFlags & FORMAT_FLAG_PAD_ZERO ) = = FORMAT_FLAG_PAD_ZERO ) & & ( NumDigits = = 0u ) ) {
c = ' 0 ' ;
} else {
c = ' ' ;
}
while ( ( FieldWidth ! = 0u ) & & ( Width < FieldWidth ) ) {
FieldWidth - - ;
_StoreChar ( pBufferDesc , c ) ;
}
}
}
//
// Compute Digit.
// Loop until Digit has the value of the highest digit required.
// Example: If the output is 345 (Base 10), loop 2 times until Digit is 100.
//
while ( 1 ) {
if ( NumDigits > 1u ) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned)
NumDigits - - ;
} else {
Div = v / Digit ;
if ( Div < Base ) { // Is our divider big enough to extract the highest digit from value? => Done
break ;
}
}
Digit * = Base ;
}
//
// Output digits
//
do {
Div = v / Digit ;
v - = Div * Digit ;
_StoreChar ( pBufferDesc , _aV2C [ Div ] ) ;
Digit / = Base ;
} while ( Digit ) ;
//
// Print trailing spaces if necessary
//
if ( ( FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY ) = = FORMAT_FLAG_LEFT_JUSTIFY ) {
if ( FieldWidth ! = 0u ) {
while ( ( FieldWidth ! = 0u ) & & ( Width < FieldWidth ) ) {
FieldWidth - - ;
_StoreChar ( pBufferDesc , ' ' ) ;
}
}
}
}
/*********************************************************************
*
* _PrintInt ( )
*
* Function description
* Print a signed integer with the given formatting into the
* formatted string .
*
* Parameters
* pBufferDesc Pointer to the buffer description .
* v Value to be printed .
* Base Base of the value .
* NumDigits Number of digits to be printed .
* FieldWidth Width of the printed field .
* FormatFlags Flags for formatting the value .
*/
static void _PrintInt ( SEGGER_SYSVIEW_PRINTF_DESC * pBufferDesc , int v , unsigned int Base , unsigned int NumDigits , unsigned int FieldWidth , unsigned int FormatFlags ) {
unsigned int Width ;
int Number ;
Number = ( v < 0 ) ? - v : v ;
//
// Get actual field width
//
Width = 1u ;
while ( Number > = ( int ) Base ) {
Number = ( Number / ( int ) Base ) ;
Width + + ;
}
if ( NumDigits > Width ) {
Width = NumDigits ;
}
if ( ( FieldWidth > 0u ) & & ( ( v < 0 ) | | ( ( FormatFlags & FORMAT_FLAG_PRINT_SIGN ) = = FORMAT_FLAG_PRINT_SIGN ) ) ) {
FieldWidth - - ;
}
//
// Print leading spaces if necessary
//
if ( ( ( ( FormatFlags & FORMAT_FLAG_PAD_ZERO ) = = 0u ) | | ( NumDigits ! = 0u ) ) & & ( ( FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY ) = = 0u ) ) {
if ( FieldWidth ! = 0u ) {
while ( ( FieldWidth ! = 0u ) & & ( Width < FieldWidth ) ) {
FieldWidth - - ;
_StoreChar ( pBufferDesc , ' ' ) ;
}
}
}
//
// Print sign if necessary
//
if ( v < 0 ) {
v = - v ;
_StoreChar ( pBufferDesc , ' - ' ) ;
} else if ( ( FormatFlags & FORMAT_FLAG_PRINT_SIGN ) = = FORMAT_FLAG_PRINT_SIGN ) {
_StoreChar ( pBufferDesc , ' + ' ) ;
} else {
}
//
// Print leading zeros if necessary
//
if ( ( ( FormatFlags & FORMAT_FLAG_PAD_ZERO ) = = FORMAT_FLAG_PAD_ZERO ) & & ( ( FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY ) = = 0u ) & & ( NumDigits = = 0u ) ) {
if ( FieldWidth ! = 0u ) {
while ( ( FieldWidth ! = 0u ) & & ( Width < FieldWidth ) ) {
FieldWidth - - ;
_StoreChar ( pBufferDesc , ' 0 ' ) ;
}
}
}
//
// Print number without sign
//
_PrintUnsigned ( pBufferDesc , ( unsigned int ) v , Base , NumDigits , FieldWidth , FormatFlags ) ;
}
/*********************************************************************
*
* _VPrintTarget ( )
*
* Function description
* Stores a formatted string .
* This data is read by the host .
*
* Parameters
* sFormat Pointer to format string .
* Options Options to be sent to the host .
* pParamList Pointer to the list of arguments for the format string .
*/
static void _VPrintTarget ( const char * sFormat , U32 Options , va_list * pParamList ) {
SEGGER_SYSVIEW_PRINTF_DESC BufferDesc ;
char c ;
int v ;
unsigned int NumDigits ;
unsigned int FormatFlags ;
unsigned int FieldWidth ;
U8 * pPayloadStart ;
# if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
SEGGER_SYSVIEW_LOCK ( ) ;
# else
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
# endif
# if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0
BufferDesc . pBuffer = aPacket ;
# else
BufferDesc . pBuffer = _aPacket ;
# endif
BufferDesc . Cnt = 0u ;
BufferDesc . pPayloadStart = pPayloadStart ;
BufferDesc . pPayload = BufferDesc . pPayloadStart + 1u ;
BufferDesc . Options = Options ;
do {
c = * sFormat ;
sFormat + + ;
if ( c = = 0u ) {
break ;
}
if ( c = = ' % ' ) {
//
// Filter out flags
//
FormatFlags = 0u ;
v = 1 ;
do {
c = * sFormat ;
switch ( c ) {
case ' - ' : FormatFlags | = FORMAT_FLAG_LEFT_JUSTIFY ; sFormat + + ; break ;
case ' 0 ' : FormatFlags | = FORMAT_FLAG_PAD_ZERO ; sFormat + + ; break ;
case ' + ' : FormatFlags | = FORMAT_FLAG_PRINT_SIGN ; sFormat + + ; break ;
case ' # ' : FormatFlags | = FORMAT_FLAG_ALTERNATE ; sFormat + + ; break ;
default : v = 0 ; break ;
}
} while ( v ) ;
//
// filter out field with
//
FieldWidth = 0u ;
do {
c = * sFormat ;
if ( ( c < ' 0 ' ) | | ( c > ' 9 ' ) ) {
break ;
}
sFormat + + ;
FieldWidth = ( FieldWidth * 10u ) + ( ( unsigned int ) c - ' 0 ' ) ;
} while ( 1 ) ;
//
// Filter out precision (number of digits to display)
//
NumDigits = 0u ;
c = * sFormat ;
if ( c = = ' . ' ) {
sFormat + + ;
do {
c = * sFormat ;
if ( ( c < ' 0 ' ) | | ( c > ' 9 ' ) ) {
break ;
}
sFormat + + ;
NumDigits = NumDigits * 10u + ( ( unsigned int ) c - ' 0 ' ) ;
} while ( 1 ) ;
}
//
// Filter out length modifier
//
c = * sFormat ;
do {
if ( ( c = = ' l ' ) | | ( c = = ' h ' ) ) {
c = * sFormat ;
sFormat + + ;
} else {
break ;
}
} while ( 1 ) ;
//
// Handle specifiers
//
switch ( c ) {
case ' c ' : {
char c0 ;
v = va_arg ( * pParamList , int ) ;
c0 = ( char ) v ;
_StoreChar ( & BufferDesc , c0 ) ;
break ;
}
case ' d ' :
v = va_arg ( * pParamList , int ) ;
_PrintInt ( & BufferDesc , v , 10u , NumDigits , FieldWidth , FormatFlags ) ;
break ;
case ' u ' :
v = va_arg ( * pParamList , int ) ;
_PrintUnsigned ( & BufferDesc , ( unsigned int ) v , 10u , NumDigits , FieldWidth , FormatFlags ) ;
break ;
case ' x ' :
case ' X ' :
v = va_arg ( * pParamList , int ) ;
_PrintUnsigned ( & BufferDesc , ( unsigned int ) v , 16u , NumDigits , FieldWidth , FormatFlags ) ;
break ;
case ' p ' :
v = va_arg ( * pParamList , int ) ;
_PrintUnsigned ( & BufferDesc , ( unsigned int ) v , 16u , 8u , 8u , 0u ) ;
break ;
case ' % ' :
_StoreChar ( & BufferDesc , ' % ' ) ;
break ;
default :
break ;
}
sFormat + + ;
} else {
_StoreChar ( & BufferDesc , c ) ;
}
} while ( * sFormat ) ;
//
// Write remaining data, if any
//
if ( BufferDesc . Cnt ! = 0u ) {
* ( BufferDesc . pPayloadStart ) = BufferDesc . Cnt ;
ENCODE_U32 ( BufferDesc . pPayload , BufferDesc . Options ) ;
ENCODE_U32 ( BufferDesc . pPayload , 0 ) ;
_SendPacket ( BufferDesc . pPayloadStart , BufferDesc . pPayload , SYSVIEW_EVTID_PRINT_FORMATTED ) ;
}
# if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0
SEGGER_SYSVIEW_UNLOCK ( ) ;
RECORD_END ( ) ;
# else
RECORD_END ( ) ;
# endif
}
# endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF
/*********************************************************************
*
* Public functions
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/*********************************************************************
*
* SEGGER_SYSVIEW_Init ( )
*
* Function description
* Initializes the SYSVIEW module .
* Must be called before SystemViewer attaches to the system .
*
* Parameters
* SysFreq - Frequency of timestamp , i . e . CPU core clock frequency .
* CPUFreq - CPU core clock frequency .
* pOSAPI - Pointer to the API structure for OS - specific functions .
* pfSendSysDesc - Pointer to SendSysDesc callback function .
*
* Additional information
* This function initializes the RTT channel used to transport
* SEGGER SystemView packets .
* The channel is assigned the label " SysView " for client software
* to identify the SystemView channel .
*
* Notes
* The channel is configured by the macro SEGGER_SYSVIEW_RTT_CHANNEL .
*/
void SEGGER_SYSVIEW_Init ( U32 SysFreq , U32 CPUFreq , const SEGGER_SYSVIEW_OS_API * pOSAPI , SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC pfSendSysDesc ) {
# ifdef SEGGER_RTT_SECTION
//
// Explicitly initialize the RTT Control Block if it is in its dedicated section.
//
SEGGER_RTT_Init ( ) ;
# endif
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
# if SEGGER_SYSVIEW_RTT_CHANNEL > 0
SEGGER_RTT_ConfigUpBuffer ( SEGGER_SYSVIEW_RTT_CHANNEL , " SysView " , & _UpBuffer [ 0 ] , sizeof ( _UpBuffer ) , SEGGER_RTT_MODE_NO_BLOCK_SKIP ) ;
# else
_SYSVIEW_Globals . UpChannel = SEGGER_RTT_AllocUpBuffer ( " SysView " , & _UpBuffer [ 0 ] , sizeof ( _UpBuffer ) , SEGGER_RTT_MODE_NO_BLOCK_SKIP ) ;
# endif
_SYSVIEW_Globals . RAMBaseAddress = SEGGER_SYSVIEW_ID_BASE ;
_SYSVIEW_Globals . LastTxTimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP ( ) ;
_SYSVIEW_Globals . pOSAPI = pOSAPI ;
_SYSVIEW_Globals . SysFreq = SysFreq ;
_SYSVIEW_Globals . CPUFreq = CPUFreq ;
_SYSVIEW_Globals . pfSendSysDesc = pfSendSysDesc ;
_SYSVIEW_Globals . EnableState = 0 ;
_SYSVIEW_Globals . PacketCount = 0 ;
# else // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
# if SEGGER_SYSVIEW_RTT_CHANNEL > 0
SEGGER_RTT_ConfigUpBuffer ( SEGGER_SYSVIEW_RTT_CHANNEL , " SysView " , & _UpBuffer [ 0 ] , sizeof ( _UpBuffer ) , SEGGER_RTT_MODE_NO_BLOCK_SKIP ) ;
SEGGER_RTT_ConfigDownBuffer ( SEGGER_SYSVIEW_RTT_CHANNEL , " SysView " , & _DownBuffer [ 0 ] , sizeof ( _DownBuffer ) , SEGGER_RTT_MODE_NO_BLOCK_SKIP ) ;
# else
_SYSVIEW_Globals . UpChannel = SEGGER_RTT_AllocUpBuffer ( " SysView " , & _UpBuffer [ 0 ] , sizeof ( _UpBuffer ) , SEGGER_RTT_MODE_NO_BLOCK_SKIP ) ;
//
// TODO: Use SEGGER_RTT_AllocDownBuffer when SystemViewer is able to handle another Down Channel than Up Channel.
//
_SYSVIEW_Globals . DownChannel = _SYSVIEW_Globals . UpChannel ;
SEGGER_RTT_ConfigDownBuffer ( _SYSVIEW_Globals . DownChannel , " SysView " , & _DownBuffer [ 0 ] , sizeof ( _DownBuffer ) , SEGGER_RTT_MODE_NO_BLOCK_SKIP ) ;
# endif
_SYSVIEW_Globals . RAMBaseAddress = SEGGER_SYSVIEW_ID_BASE ;
_SYSVIEW_Globals . LastTxTimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP ( ) ;
_SYSVIEW_Globals . pOSAPI = pOSAPI ;
_SYSVIEW_Globals . SysFreq = SysFreq ;
_SYSVIEW_Globals . CPUFreq = CPUFreq ;
_SYSVIEW_Globals . pfSendSysDesc = pfSendSysDesc ;
_SYSVIEW_Globals . EnableState = 0 ;
# endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SetRAMBase ( )
*
* Function description
* Sets the RAM base address , which is subtracted from IDs in order
* to save bandwidth .
*
* Parameters
* RAMBaseAddress - Lowest RAM Address . ( i . e . 0x20000000 on most Cortex - M )
*/
void SEGGER_SYSVIEW_SetRAMBase ( U32 RAMBaseAddress ) {
_SYSVIEW_Globals . RAMBaseAddress = RAMBaseAddress ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordVoid ( )
*
* Function description
* Formats and sends a SystemView packet with an empty payload .
*
* Parameters
* EventID - SystemView event ID .
*/
void SEGGER_SYSVIEW_RecordVoid ( unsigned int EventID ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
_SendPacket ( pPayloadStart , pPayloadStart , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32 ( )
*
* Function description
* Formats and sends a SystemView packet containing a single U32
* parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Value - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32 ( unsigned int EventID , U32 Value ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Value ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x2 ( )
*
* Function description
* Formats and sends a SystemView packet containing 2 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x2 ( unsigned int EventID , U32 Para0 , U32 Para1 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x3 ( )
*
* Function description
* Formats and sends a SystemView packet containing 3 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x3 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 3 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x4 ( )
*
* Function description
* Formats and sends a SystemView packet containing 4 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x4 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x5 ( )
*
* Function description
* Formats and sends a SystemView packet containing 5 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
* Para4 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x5 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 , U32 Para4 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 5 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
ENCODE_U32 ( pPayload , Para4 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x6 ( )
*
* Function description
* Formats and sends a SystemView packet containing 6 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
* Para4 - The 32 - bit parameter encoded to SystemView packet payload .
* Para5 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x6 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 , U32 Para4 , U32 Para5 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 6 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
ENCODE_U32 ( pPayload , Para4 ) ;
ENCODE_U32 ( pPayload , Para5 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x7 ( )
*
* Function description
* Formats and sends a SystemView packet containing 7 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
* Para4 - The 32 - bit parameter encoded to SystemView packet payload .
* Para5 - The 32 - bit parameter encoded to SystemView packet payload .
* Para6 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x7 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 , U32 Para4 , U32 Para5 , U32 Para6 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 7 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
ENCODE_U32 ( pPayload , Para4 ) ;
ENCODE_U32 ( pPayload , Para5 ) ;
ENCODE_U32 ( pPayload , Para6 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x8 ( )
*
* Function description
* Formats and sends a SystemView packet containing 8 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
* Para4 - The 32 - bit parameter encoded to SystemView packet payload .
* Para5 - The 32 - bit parameter encoded to SystemView packet payload .
* Para6 - The 32 - bit parameter encoded to SystemView packet payload .
* Para7 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x8 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 , U32 Para4 , U32 Para5 , U32 Para6 , U32 Para7 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 8 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
ENCODE_U32 ( pPayload , Para4 ) ;
ENCODE_U32 ( pPayload , Para5 ) ;
ENCODE_U32 ( pPayload , Para6 ) ;
ENCODE_U32 ( pPayload , Para7 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x9 ( )
*
* Function description
* Formats and sends a SystemView packet containing 9 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
* Para4 - The 32 - bit parameter encoded to SystemView packet payload .
* Para5 - The 32 - bit parameter encoded to SystemView packet payload .
* Para6 - The 32 - bit parameter encoded to SystemView packet payload .
* Para7 - The 32 - bit parameter encoded to SystemView packet payload .
* Para8 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x9 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 , U32 Para4 , U32 Para5 , U32 Para6 , U32 Para7 , U32 Para8 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 9 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
ENCODE_U32 ( pPayload , Para4 ) ;
ENCODE_U32 ( pPayload , Para5 ) ;
ENCODE_U32 ( pPayload , Para6 ) ;
ENCODE_U32 ( pPayload , Para7 ) ;
ENCODE_U32 ( pPayload , Para8 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordU32x10 ( )
*
* Function description
* Formats and sends a SystemView packet containing 10 U32 parameter payload .
*
* Parameters
* EventID - SystemView event ID .
* Para0 - The 32 - bit parameter encoded to SystemView packet payload .
* Para1 - The 32 - bit parameter encoded to SystemView packet payload .
* Para2 - The 32 - bit parameter encoded to SystemView packet payload .
* Para3 - The 32 - bit parameter encoded to SystemView packet payload .
* Para4 - The 32 - bit parameter encoded to SystemView packet payload .
* Para5 - The 32 - bit parameter encoded to SystemView packet payload .
* Para6 - The 32 - bit parameter encoded to SystemView packet payload .
* Para7 - The 32 - bit parameter encoded to SystemView packet payload .
* Para8 - The 32 - bit parameter encoded to SystemView packet payload .
* Para9 - The 32 - bit parameter encoded to SystemView packet payload .
*/
void SEGGER_SYSVIEW_RecordU32x10 ( unsigned int EventID , U32 Para0 , U32 Para1 , U32 Para2 , U32 Para3 , U32 Para4 , U32 Para5 , U32 Para6 , U32 Para7 , U32 Para8 , U32 Para9 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 10 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , Para0 ) ;
ENCODE_U32 ( pPayload , Para1 ) ;
ENCODE_U32 ( pPayload , Para2 ) ;
ENCODE_U32 ( pPayload , Para3 ) ;
ENCODE_U32 ( pPayload , Para4 ) ;
ENCODE_U32 ( pPayload , Para5 ) ;
ENCODE_U32 ( pPayload , Para6 ) ;
ENCODE_U32 ( pPayload , Para7 ) ;
ENCODE_U32 ( pPayload , Para8 ) ;
ENCODE_U32 ( pPayload , Para9 ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordString ( )
*
* Function description
* Formats and sends a SystemView packet containing a string .
*
* Parameters
* EventID - SystemView event ID .
* pString - The string to be sent in the SystemView packet payload .
*
* Additional information
* The string is encoded as a count byte followed by the contents
* of the string .
* No more than SEGGER_SYSVIEW_MAX_STRING_LEN bytes will be encoded to the payload .
*/
void SEGGER_SYSVIEW_RecordString ( unsigned int EventID , const char * pString ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = _EncodeStr ( pPayloadStart , pString , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
_SendPacket ( pPayloadStart , pPayload , EventID ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_Start ( )
*
* Function description
* Start recording SystemView events .
* This function is triggered by the host application .
*
* Additional information
* This function enables transmission of SystemView packets recorded
* by subsequent trace calls and records a SystemView Start event .
*
* As part of start , a SystemView Init packet is sent , containing the system
* frequency . The list of current tasks , the current system time and the
* system description string is sent , too .
*
* Notes
* SEGGER_SYSVIEW_Start and SEGGER_SYSVIEW_Stop do not nest .
*/
void SEGGER_SYSVIEW_Start ( void ) {
if ( _SYSVIEW_Globals . EnableState = = 0 ) {
_SYSVIEW_Globals . EnableState = 1 ;
# if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
_SendSyncInfo ( ) ;
# else
SEGGER_SYSVIEW_LOCK ( ) ;
SEGGER_RTT_WriteSkipNoLock ( CHANNEL_ID_UP , _abSync , 10 ) ;
SEGGER_SYSVIEW_UNLOCK ( ) ;
SEGGER_SYSVIEW_RecordVoid ( SYSVIEW_EVTID_TRACE_START ) ;
{
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . SysFreq ) ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . CPUFreq ) ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . RAMBaseAddress ) ;
ENCODE_U32 ( pPayload , SEGGER_SYSVIEW_ID_SHIFT ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_INIT ) ;
RECORD_END ( ) ;
}
if ( _SYSVIEW_Globals . pfSendSysDesc ) {
_SYSVIEW_Globals . pfSendSysDesc ( ) ;
}
SEGGER_SYSVIEW_RecordSystime ( ) ;
SEGGER_SYSVIEW_SendTaskList ( ) ;
SEGGER_SYSVIEW_SendNumModules ( ) ;
# endif
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_Stop ( )
*
* Function description
* Stop recording SystemView events .
*
* Additional information
* This function disables transmission of SystemView packets recorded
* by subsequent trace calls . If transmission is enabled when
* this function is called , a single SystemView Stop event is recorded
* to the trace , send , and then trace transmission is halted .
*/
void SEGGER_SYSVIEW_Stop ( void ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
if ( _SYSVIEW_Globals . EnableState ) {
_SendPacket ( pPayloadStart , pPayloadStart , SYSVIEW_EVTID_TRACE_STOP ) ;
_SYSVIEW_Globals . EnableState = 0 ;
}
RECORD_END ( ) ;
}
2018-12-12 12:35:17 -05:00
U8 SEGGER_SYSVIEW_Started ( void ) {
return _SYSVIEW_Globals . EnableState ;
}
2018-07-04 19:01:03 -04:00
/*********************************************************************
*
* SEGGER_SYSVIEW_GetSysDesc ( )
*
* Function description
* Triggers a send of the system information and description .
*
*/
void SEGGER_SYSVIEW_GetSysDesc ( void ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . SysFreq ) ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . CPUFreq ) ;
ENCODE_U32 ( pPayload , _SYSVIEW_Globals . RAMBaseAddress ) ;
ENCODE_U32 ( pPayload , SEGGER_SYSVIEW_ID_SHIFT ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_INIT ) ;
RECORD_END ( ) ;
if ( _SYSVIEW_Globals . pfSendSysDesc ) {
_SYSVIEW_Globals . pfSendSysDesc ( ) ;
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendTaskInfo ( )
*
* Function description
* Send a Task Info Packet , containing TaskId for identification ,
* task priority and task name .
*
* Parameters
* pInfo - Pointer to task information to send .
*/
void SEGGER_SYSVIEW_SendTaskInfo ( const SEGGER_SYSVIEW_TASKINFO * pInfo ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 + 1 + 32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , SHRINK_ID ( pInfo - > TaskID ) ) ;
ENCODE_U32 ( pPayload , pInfo - > Prio ) ;
pPayload = _EncodeStr ( pPayload , pInfo - > sName , 32 ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TASK_INFO ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , SHRINK_ID ( pInfo - > TaskID ) ) ;
ENCODE_U32 ( pPayload , pInfo - > StackBase ) ;
ENCODE_U32 ( pPayload , pInfo - > StackSize ) ;
ENCODE_U32 ( pPayload , 0 ) ; // Stack End, future use
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_STACK_INFO ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendTaskList ( )
*
* Function description
* Send all tasks descriptors to the host .
*/
void SEGGER_SYSVIEW_SendTaskList ( void ) {
if ( _SYSVIEW_Globals . pOSAPI & & _SYSVIEW_Globals . pOSAPI - > pfSendTaskList ) {
_SYSVIEW_Globals . pOSAPI - > pfSendTaskList ( ) ;
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendSysDesc ( )
*
* Function description
* Send the system description string to the host .
* The system description is used by SystemViewer to identify the
* current application and handle events accordingly .
*
* Parameters
* sSysDesc - Pointer to the 0 - terminated system description string .
*
* Additional information
* One system description string may not exceed SEGGER_SYSVIEW_MAX_STRING_LEN characters .
*
* The Following items can be described in a system description string .
* Each item is identified by its identifier , followed by ' = ' and the value .
* Items are separated by ' , ' .
*/
void SEGGER_SYSVIEW_SendSysDesc ( const char * sSysDesc ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = _EncodeStr ( pPayloadStart , sSysDesc , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_SYSDESC ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordSystime ( )
*
* Function description
* Formats and sends a SystemView Systime containing a single U64 or U32
* parameter payload .
*/
void SEGGER_SYSVIEW_RecordSystime ( void ) {
U64 Systime ;
if ( _SYSVIEW_Globals . pOSAPI & & _SYSVIEW_Globals . pOSAPI - > pfGetTime ) {
Systime = _SYSVIEW_Globals . pOSAPI - > pfGetTime ( ) ;
SEGGER_SYSVIEW_RecordU32x2 ( SYSVIEW_EVTID_SYSTIME_US ,
( U32 ) ( Systime ) ,
( U32 ) ( Systime > > 32 ) ) ;
} else {
SEGGER_SYSVIEW_RecordU32 ( SYSVIEW_EVTID_SYSTIME_CYCLES , SEGGER_SYSVIEW_GET_TIMESTAMP ( ) ) ;
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordEnterISR ( )
*
* Function description
* Format and send an ISR entry event .
*
* Additional information
* Example packets sent
* 02 0F 50 // ISR(15) Enter. Timestamp is 80 (0x50)
*/
void SEGGER_SYSVIEW_RecordEnterISR ( U32 IrqId ) {
unsigned v ;
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
v = IrqId ; //SEGGER_SYSVIEW_GET_INTERRUPT_ID();
ENCODE_U32 ( pPayload , v ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_ISR_ENTER ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordExitISR ( )
*
* Function description
* Format and send an ISR exit event .
*
* Additional information
* Format as follows :
* 03 < TimeStamp > // Max. packet len is 6
*
* Example packets sent
* 03 20 // ISR Exit. Timestamp is 32 (0x20)
*/
void SEGGER_SYSVIEW_RecordExitISR ( void ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
_SendPacket ( pPayloadStart , pPayloadStart , SYSVIEW_EVTID_ISR_EXIT ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordExitISRToScheduler ( )
*
* Function description
* Format and send an ISR exit into scheduler event .
*
* Additional information
* Format as follows :
* 18 < TimeStamp > // Max. packet len is 6
*
* Example packets sent
* 18 20 // ISR Exit to Scheduler. Timestamp is 32 (0x20)
*/
void SEGGER_SYSVIEW_RecordExitISRToScheduler ( void ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
_SendPacket ( pPayloadStart , pPayloadStart , SYSVIEW_EVTID_ISR_TO_SCHEDULER ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordEnterTimer ( )
*
* Function description
* Format and send a Timer entry event .
*
* Parameters
* TimerId - Id of the timer which starts .
*/
void SEGGER_SYSVIEW_RecordEnterTimer ( U32 TimerId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , SHRINK_ID ( TimerId ) ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TIMER_ENTER ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordExitTimer ( )
*
* Function description
* Format and send a Timer exit event .
*/
void SEGGER_SYSVIEW_RecordExitTimer ( void ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
_SendPacket ( pPayloadStart , pPayloadStart , SYSVIEW_EVTID_TIMER_EXIT ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordEndCall ( )
*
* Function description
* Format and send an End API Call event without return value .
*
* Parameters
* EventID - Id of API function which ends .
*/
void SEGGER_SYSVIEW_RecordEndCall ( unsigned int EventID ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , EventID ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_END_CALL ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordEndCallU32 ( )
*
* Function description
* Format and send an End API Call event with return value .
*
* Parameters
* EventID - Id of API function which ends .
* Para0 - Return value which will be returned by the API function .
*/
void SEGGER_SYSVIEW_RecordEndCallU32 ( unsigned int EventID , U32 Para0 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , EventID ) ;
ENCODE_U32 ( pPayload , Para0 ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_END_CALL ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnIdle ( )
*
* Function description
* Record an Idle event .
*/
void SEGGER_SYSVIEW_OnIdle ( void ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
_SendPacket ( pPayloadStart , pPayloadStart , SYSVIEW_EVTID_IDLE ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnTaskCreate ( )
*
* Function description
* Record a Task Create event . The Task Create event corresponds
* to creating a task in the OS .
*
* Parameters
* TaskId - Task ID of created task .
*/
void SEGGER_SYSVIEW_OnTaskCreate ( U32 TaskId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
TaskId = SHRINK_ID ( TaskId ) ;
ENCODE_U32 ( pPayload , TaskId ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TASK_CREATE ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnTaskTerminate ( )
*
* Function description
* Record a Task termination event .
* The Task termination event corresponds to terminating a task in
* the OS . If the TaskId is the currently active task ,
* SEGGER_SYSVIEW_OnTaskStopExec may be used , either .
*
* Parameters
* TaskId - Task ID of terminated task .
*/
void SEGGER_SYSVIEW_OnTaskTerminate ( U32 TaskId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
TaskId = SHRINK_ID ( TaskId ) ;
ENCODE_U32 ( pPayload , TaskId ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TASK_TERMINATE ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnTaskStartExec ( )
*
* Function description
* Record a Task Start Execution event . The Task Start event
* corresponds to when a task has started to execute rather than
* when it is ready to execute .
*
* Parameters
* TaskId - Task ID of task that started to execute .
*/
void SEGGER_SYSVIEW_OnTaskStartExec ( U32 TaskId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
TaskId = SHRINK_ID ( TaskId ) ;
ENCODE_U32 ( pPayload , TaskId ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TASK_START_EXEC ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnTaskStopExec ( )
*
* Function description
* Record a Task Stop Execution event . The Task Stop event
* corresponds to when a task stops executing and terminates .
*/
void SEGGER_SYSVIEW_OnTaskStopExec ( void ) {
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE ) ;
//
_SendPacket ( pPayloadStart , pPayloadStart , SYSVIEW_EVTID_TASK_STOP_EXEC ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnTaskStartReady ( )
*
* Function description
* Record a Task Start Ready event .
*
* Parameters
* TaskId - Task ID of task that started to execute .
*/
void SEGGER_SYSVIEW_OnTaskStartReady ( U32 TaskId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
TaskId = SHRINK_ID ( TaskId ) ;
ENCODE_U32 ( pPayload , TaskId ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TASK_START_READY ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnTaskStopReady ( )
*
* Function description
* Record a Task Stop Ready event .
*
* Parameters
* TaskId - Task ID of task that completed execution .
* Cause - Reason for task to stop ( i . e . Idle / Sleep )
*/
void SEGGER_SYSVIEW_OnTaskStopReady ( U32 TaskId , unsigned int Cause ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
TaskId = SHRINK_ID ( TaskId ) ;
ENCODE_U32 ( pPayload , TaskId ) ;
ENCODE_U32 ( pPayload , Cause ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_TASK_STOP_READY ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnUserStart ( )
*
* Function description
* Send a user event start , such as start of a subroutine for profiling .
*
* Parameters
* UserId - User defined ID for the event .
*/
void SEGGER_SYSVIEW_OnUserStart ( unsigned UserId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , UserId ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_USER_START ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_OnUserStop ( )
*
* Function description
* Send a user event stop , such as return of a subroutine for profiling .
*
* Parameters
* UserId - User defined ID for the event .
*/
void SEGGER_SYSVIEW_OnUserStop ( unsigned UserId ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , UserId ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_USER_STOP ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_NameResource ( )
*
* Function description
* Send the name of a resource to be displayed in SystemViewer .
*
* Parameters
* ResourceId - Id of the resource to be named . i . e . its address .
* sName - Pointer to the resource name . ( Max . SEGGER_SYSVIEW_MAX_STRING_LEN Bytes )
*/
void SEGGER_SYSVIEW_NameResource ( U32 ResourceId , const char * sName ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , SHRINK_ID ( ResourceId ) ) ;
pPayload = _EncodeStr ( pPayload , sName , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_NAME_RESOURCE ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendPacket ( )
*
* Function description
* Send an event packet .
*
* Parameters
* pPacket - Pointer to the start of the packet .
* pPayloadEnd - Pointer to the end of the payload .
* Make sure there are at least 5 bytes free after the payload .
* EventId - Id of the event packet .
*
* Return value
* ! = 0 : Success , Message sent .
* = = 0 : Buffer full , Message * NOT * sent .
*/
int SEGGER_SYSVIEW_SendPacket ( U8 * pPacket , U8 * pPayloadEnd , unsigned int EventId ) {
# if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1)
SEGGER_SYSVIEW_LOCK ( ) ;
# endif
_SendPacket ( pPacket + 4 , pPayloadEnd , EventId ) ;
# if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1)
SEGGER_SYSVIEW_UNLOCK ( ) ;
# endif
return 0 ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_EncodeU32 ( )
*
* Function description
* Encode a U32 in variable - length format .
*
* Parameters
* pPayload - Pointer to where U32 will be encoded .
* Value - The 32 - bit value to be encoded .
*
* Return value
* Pointer to the byte following the value , i . e . the first free
* byte in the payload and the next position to store payload
* content .
*/
U8 * SEGGER_SYSVIEW_EncodeU32 ( U8 * pPayload , U32 Value ) {
ENCODE_U32 ( pPayload , Value ) ;
return pPayload ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_EncodeString ( )
*
* Function description
* Encode a string in variable - length format .
*
* Parameters
* pPayload - Pointer to where string will be encoded .
* s - String to encode .
* MaxLen - Maximum number of characters to encode from string .
*
* Return value
* Pointer to the byte following the value , i . e . the first free
* byte in the payload and the next position to store payload
* content .
*
* Additional information
* The string is encoded as a count byte followed by the contents
* of the string .
* No more than 1 + MaxLen bytes will be encoded to the payload .
*/
U8 * SEGGER_SYSVIEW_EncodeString ( U8 * pPayload , const char * s , unsigned int MaxLen ) {
return _EncodeStr ( pPayload , s , MaxLen ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_EncodeData ( )
*
* Function description
* Encode a byte buffer in variable - length format .
*
* Parameters
* pPayload - Pointer to where string will be encoded .
* pSrc - Pointer to data buffer to be encoded .
* NumBytes - Number of bytes in the buffer to be encoded .
*
* Return value
* Pointer to the byte following the value , i . e . the first free
* byte in the payload and the next position to store payload
* content .
*
* Additional information
* The data is encoded as a count byte followed by the contents
* of the data buffer .
* Make sure NumBytes + 1 bytes are free for the payload .
*/
U8 * SEGGER_SYSVIEW_EncodeData ( U8 * pPayload , const char * pSrc , unsigned int NumBytes ) {
return _EncodeData ( pPayload , pSrc , NumBytes ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_EncodeId ( )
*
* Function description
* Encode a 32 - bit Id in shrunken variable - length format .
*
* Parameters
* pPayload - Pointer to where the Id will be encoded .
* Id - The 32 - bit value to be encoded .
*
* Return value
* Pointer to the byte following the value , i . e . the first free
* byte in the payload and the next position to store payload
* content .
*
* Additional information
* The parameters to shrink an Id can be configured in
* SEGGER_SYSVIEW_Conf . h and via SEGGER_SYSVIEW_SetRAMBase ( ) .
* SEGGER_SYSVIEW_ID_BASE : Lowest Id reported by the application .
* ( i . e . 0x20000000 when all Ids are an address in this RAM )
* SEGGER_SYSVIEW_ID_SHIFT : Number of bits to shift the Id to
* save bandwidth . ( i . e . 2 when Ids are 4 byte aligned )
*/
U8 * SEGGER_SYSVIEW_EncodeId ( U8 * pPayload , U32 Id ) {
Id = SHRINK_ID ( Id ) ;
ENCODE_U32 ( pPayload , Id ) ;
return pPayload ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_ShrinkId ( )
*
* Function description
* Get the shrunken value of an Id for further processing like in
* SEGGER_SYSVIEW_NameResource ( ) .
*
* Parameters
* Id - The 32 - bit value to be shrunken .
*
* Return value
* Shrunken Id .
*
* Additional information
* The parameters to shrink an Id can be configured in
* SEGGER_SYSVIEW_Conf . h and via SEGGER_SYSVIEW_SetRAMBase ( ) .
* SEGGER_SYSVIEW_ID_BASE : Lowest Id reported by the application .
* ( i . e . 0x20000000 when all Ids are an address in this RAM )
* SEGGER_SYSVIEW_ID_SHIFT : Number of bits to shift the Id to
* save bandwidth . ( i . e . 2 when Ids are 4 byte aligned )
*/
U32 SEGGER_SYSVIEW_ShrinkId ( U32 Id ) {
return SHRINK_ID ( Id ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RegisterModule ( )
*
* Function description
* Register a middleware module for recording its events .
*
* Parameters
* pModule - The middleware module information .
*
* Additional information
* SEGGER_SYSVIEW_MODULE elements :
* sDescription - Pointer to a string containing the module name and optionally the module event description .
* NumEvents - Number of events the module wants to register .
* EventOffset - Offset to be added to the event Ids . Out parameter , set by this function . Do not modify after calling this function .
* pfSendModuleDesc - Callback function pointer to send more detailed module description to SystemViewer .
* pNext - Pointer to next registered module . Out parameter , set by this function . Do not modify after calling this function .
*/
void SEGGER_SYSVIEW_RegisterModule ( SEGGER_SYSVIEW_MODULE * pModule ) {
SEGGER_SYSVIEW_LOCK ( ) ;
if ( _pFirstModule = = 0 ) {
//
// No module registered, yet.
// Start list with new module.
// EventOffset is the base offset for modules
//
pModule - > EventOffset = MODULE_EVENT_OFFSET ;
pModule - > pNext = 0 ;
_pFirstModule = pModule ;
_NumModules = 1 ;
} else {
//
// Registreded module(s) present.
// Prepend new module in list.
// EventOffset set from number of events and offset of previous module.
//
pModule - > EventOffset = _pFirstModule - > EventOffset + _pFirstModule - > NumEvents ;
pModule - > pNext = _pFirstModule ;
_pFirstModule = pModule ;
_NumModules + + ;
}
2018-10-18 12:14:44 -04:00
SEGGER_SYSVIEW_SendModule ( _NumModules - 1 ) ;
2018-07-04 19:01:03 -04:00
if ( pModule - > pfSendModuleDesc ) {
pModule - > pfSendModuleDesc ( ) ;
}
SEGGER_SYSVIEW_UNLOCK ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_RecordModuleDescription ( )
*
* Function description
* Sends detailed information of a registered module to the host .
*
* Parameters
* pModule - Pointer to the described module .
* sDescription - Pointer to a description string .
*/
void SEGGER_SYSVIEW_RecordModuleDescription ( const SEGGER_SYSVIEW_MODULE * pModule , const char * sDescription ) {
U8 ModuleId ;
SEGGER_SYSVIEW_MODULE * p ;
p = _pFirstModule ;
ModuleId = 0 ;
do {
if ( p = = pModule ) {
break ;
}
ModuleId + + ;
p = p - > pNext ;
} while ( p ) ;
{
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = pPayloadStart ;
//
// Send module description
// Send event offset and number of events
//
ENCODE_U32 ( pPayload , ModuleId ) ;
ENCODE_U32 ( pPayload , ( pModule - > EventOffset ) ) ;
pPayload = _EncodeStr ( pPayload , sDescription , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_MODULEDESC ) ;
RECORD_END ( ) ;
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendModule ( )
*
* Function description
* Sends the information of a registered module to the host .
*
* Parameters
* ModuleId - Id of the requested module .
*/
void SEGGER_SYSVIEW_SendModule ( U8 ModuleId ) {
SEGGER_SYSVIEW_MODULE * pModule ;
U32 n ;
if ( _pFirstModule ! = 0 ) {
pModule = _pFirstModule ;
for ( n = 0 ; n < ModuleId ; n + + ) {
pModule = pModule - > pNext ;
if ( pModule = = 0 ) {
break ;
}
}
if ( pModule ! = 0 ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = pPayloadStart ;
//
// Send module description
// Send event offset and number of events
//
ENCODE_U32 ( pPayload , ModuleId ) ;
ENCODE_U32 ( pPayload , ( pModule - > EventOffset ) ) ;
pPayload = _EncodeStr ( pPayload , pModule - > sModule , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_MODULEDESC ) ;
RECORD_END ( ) ;
}
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendModuleDescription ( )
*
* Function description
* Triggers a send of the registered module descriptions .
*
*/
void SEGGER_SYSVIEW_SendModuleDescription ( void ) {
SEGGER_SYSVIEW_MODULE * pModule ;
if ( _pFirstModule ! = 0 ) {
pModule = _pFirstModule ;
do {
if ( pModule - > pfSendModuleDesc ) {
pModule - > pfSendModuleDesc ( ) ;
}
pModule = pModule - > pNext ;
} while ( pModule ) ;
}
}
/*********************************************************************
*
* SEGGER_SYSVIEW_SendNumModules ( )
*
* Function description
* Send the number of registered modules to the host .
*/
void SEGGER_SYSVIEW_SendNumModules ( void ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 ) ;
pPayload = pPayloadStart ;
ENCODE_U32 ( pPayload , _NumModules ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_NUMMODULES ) ;
RECORD_END ( ) ;
}
# ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list
/*********************************************************************
*
* SEGGER_SYSVIEW_PrintfHostEx ( )
*
* Function description
* Print a string which is formatted on the host by SystemViewer
* with Additional information .
*
* Parameters
* s - String to be formatted .
* Options - Options for the string . i . e . Log level .
*
* Additional information
* All format arguments are treated as 32 - bit scalar values .
*/
void SEGGER_SYSVIEW_PrintfHostEx ( const char * s , U32 Options , . . . ) {
va_list ParamList ;
va_start ( ParamList , Options ) ;
_VPrintHost ( s , Options , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_PrintfHost ( )
*
* Function description
* Print a string which is formatted on the host by SystemViewer .
*
* Parameters
* s - String to be formatted .
*
* Additional information
* All format arguments are treated as 32 - bit scalar values .
*/
void SEGGER_SYSVIEW_PrintfHost ( const char * s , . . . ) {
va_list ParamList ;
va_start ( ParamList , s ) ;
_VPrintHost ( s , SEGGER_SYSVIEW_LOG , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_WarnfHost ( )
*
* Function description
* Print a warnin string which is formatted on the host by
* SystemViewer .
*
* Parameters
* s - String to be formatted .
*
* Additional information
* All format arguments are treated as 32 - bit scalar values .
*/
void SEGGER_SYSVIEW_WarnfHost ( const char * s , . . . ) {
va_list ParamList ;
va_start ( ParamList , s ) ;
_VPrintHost ( s , SEGGER_SYSVIEW_WARNING , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_ErrorfHost ( )
*
* Function description
* Print an error string which is formatted on the host by
* SystemViewer .
*
* Parameters
* s - String to be formatted .
*
* Additional information
* All format arguments are treated as 32 - bit scalar values .
*/
void SEGGER_SYSVIEW_ErrorfHost ( const char * s , . . . ) {
va_list ParamList ;
va_start ( ParamList , s ) ;
_VPrintHost ( s , SEGGER_SYSVIEW_ERROR , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_PrintfTargetEx ( )
*
* Function description
* Print a string which is formatted on the target before sent to
* the host with Additional information .
*
* Parameters
* s - String to be formatted .
* Options - Options for the string . i . e . Log level .
*/
void SEGGER_SYSVIEW_PrintfTargetEx ( const char * s , U32 Options , . . . ) {
va_list ParamList ;
va_start ( ParamList , Options ) ;
_VPrintTarget ( s , Options , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_PrintfTarget ( )
*
* Function description
* Print a string which is formatted on the target before sent to
* the host .
*
* Parameters
* s - String to be formatted .
*/
void SEGGER_SYSVIEW_PrintfTarget ( const char * s , . . . ) {
va_list ParamList ;
va_start ( ParamList , s ) ;
_VPrintTarget ( s , SEGGER_SYSVIEW_LOG , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_WarnfTarget ( )
*
* Function description
* Print a warning string which is formatted on the target before
* sent to the host .
*
* Parameters
* s - String to be formatted .
*/
void SEGGER_SYSVIEW_WarnfTarget ( const char * s , . . . ) {
va_list ParamList ;
va_start ( ParamList , s ) ;
_VPrintTarget ( s , SEGGER_SYSVIEW_WARNING , & ParamList ) ;
va_end ( ParamList ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_ErrorfTarget ( )
*
* Function description
* Print an error string which is formatted on the target before
* sent to the host .
*
* Parameters
* s - String to be formatted .
*/
void SEGGER_SYSVIEW_ErrorfTarget ( const char * s , . . . ) {
va_list ParamList ;
va_start ( ParamList , s ) ;
_VPrintTarget ( s , SEGGER_SYSVIEW_ERROR , & ParamList ) ;
va_end ( ParamList ) ;
}
# endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF
/*********************************************************************
*
* SEGGER_SYSVIEW_Print ( )
*
* Function description
* Print a string to the host .
*
* Parameters
* s - String to sent .
*/
void SEGGER_SYSVIEW_Print ( const char * s ) {
U8 * pPayload ;
U8 * pPayloadStart ;
2018-12-12 12:35:17 -05:00
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN + 3 /*1 or 3 bytes for string length*/ ) ;
2018-07-04 19:01:03 -04:00
//
pPayload = _EncodeStr ( pPayloadStart , s , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
ENCODE_U32 ( pPayload , SEGGER_SYSVIEW_LOG ) ;
ENCODE_U32 ( pPayload , 0 ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_PRINT_FORMATTED ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_Warn ( )
*
* Function description
* Print a warning string to the host .
*
* Parameters
* s - String to sent .
*/
void SEGGER_SYSVIEW_Warn ( const char * s ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = _EncodeStr ( pPayloadStart , s , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
ENCODE_U32 ( pPayload , SEGGER_SYSVIEW_WARNING ) ;
ENCODE_U32 ( pPayload , 0 ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_PRINT_FORMATTED ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_Error ( )
*
* Function description
* Print an error string to the host .
*
* Parameters
* s - String to sent .
*/
void SEGGER_SYSVIEW_Error ( const char * s ) {
U8 * pPayload ;
U8 * pPayloadStart ;
RECORD_START ( SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
//
pPayload = _EncodeStr ( pPayloadStart , s , SEGGER_SYSVIEW_MAX_STRING_LEN ) ;
ENCODE_U32 ( pPayload , SEGGER_SYSVIEW_ERROR ) ;
ENCODE_U32 ( pPayload , 0 ) ;
_SendPacket ( pPayloadStart , pPayload , SYSVIEW_EVTID_PRINT_FORMATTED ) ;
RECORD_END ( ) ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_EnableEvents ( )
*
* Function description
* Enable standard SystemView events to be generated .
*
* Parameters
* EnableMask - Events to be enabled .
*/
void SEGGER_SYSVIEW_EnableEvents ( U32 EnableMask ) {
_SYSVIEW_Globals . DisabledEvents & = ~ EnableMask ;
}
/*********************************************************************
*
* SEGGER_SYSVIEW_DisableEvents ( )
*
* Function description
* Disable standard SystemView events to not be generated .
*
* Parameters
* DisableMask - Events to be disabled .
*/
void SEGGER_SYSVIEW_DisableEvents ( U32 DisableMask ) {
_SYSVIEW_Globals . DisabledEvents | = DisableMask ;
}
/*************************** End of file ****************************/
