esp-idf/components/esp_phy/esp32s2/include/phy_init_data.h

// Copyright 2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#ifndef PHY_INIT_DATA_H
#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */
#include "esp_phy_init.h"
#include "sdkconfig.h"

#ifdef __cplusplus
extern "C" {
#endif

// constrain a value between 'low' and 'high', inclusive
#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val)

#define PHY_INIT_MAGIC "PHYINIT"

// define the lowest tx power as LOWEST_PHY_TX_POWER
#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 52)
#define PHY_TX_POWER_OFFSET 44
#define PHY_TX_POWER_NUM    5

#if CONFIG_ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
#define PHY_CRC_ALGORITHM 1
#define PHY_COUNTRY_CODE_LEN 2
#define PHY_INIT_DATA_TYPE_OFFSET 126
#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125
#endif

static const char phy_init_magic_pre[] = PHY_INIT_MAGIC;

/**
 * @brief Structure containing default recommended PHY initialization parameters.
 */
static const esp_phy_init_data_t phy_init_data= { {
        3,
        0,
        0x04,
        0x05,
        0x04,
        0x05,
        0x05,
        0x04,
        0x06,
        0x06,
        0x06,
        0x05,
        0x06,
        0x00,
        0x00,
        0x00,
        0x00,
        0x05,
        0x09,
        0x06,
        0x05,
        0x03,
        0x06,
        0x05,
        0x00,
        0x00,
        0x00,
        0x00,
        0x00,
        0x00,
        0x00,
        0x00,
        0xf4,
        0xf8,
        0xf8,
        0xf0,
        0xf0,
        0xf0,
        0xe0,
        0xe0,
        0xe0,
        0x18,
        0x18,
        0x18,
        LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 84),
        LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 72),
        LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 66),
        LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 60),
        LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 56),
        LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 52),
        0,
        1,
        1,
        2,
        2,
        3,
        4,
        5,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
        0,
} };

static const char phy_init_magic_post[] = PHY_INIT_MAGIC;

#if CONFIG_ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
/**
 * @brief PHY init data control infomation structure
 */
typedef struct {
    uint8_t control_info_checksum[4];     /*!< 4-byte control infomation checksum */
    uint8_t multiple_bin_checksum[4];     /*!< 4-byte multiple bin checksum */
    uint8_t check_algorithm;              /*!< check algorithm */
    uint8_t version;                      /*!< PHY init data bin version */
    uint8_t number;                       /*!< PHY init data bin number */
    uint8_t length[2];                    /*!< Length of each PHY init data bin */
    uint8_t reserved[19];                 /*!< 19-byte reserved  */
} __attribute__ ((packed)) phy_control_info_data_t;

/**
 * @brief Country corresponds to PHY init data type structure
 */
typedef struct {
    char cc[PHY_COUNTRY_CODE_LEN];
    uint8_t type;
} phy_country_to_bin_type_t;
#endif

#ifdef __cplusplus
}
#endif

#endif /* PHY_INIT_DATA_H */