esp-idf/components/soc/esp32s3/include/soc/timer_group_reg.h

/** Copyright 2021 Espressif Systems (Shanghai) PTE LTD
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */
#pragma once

#include <stdint.h>
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif

/** TIMG_T0CONFIG_REG register
 *  Timer 0 configuration register
 */
#define TIMG_T0CONFIG_REG(i) (REG_TIMG_BASE(i) + 0x0)
/** TIMG_T0_USE_XTAL : R/W; bitpos: [9]; default: 0;
 *  1: Use XTAL_CLK as the source clock of timer group. 0: Use APB_CLK as the source
 *  clock of timer group.
 */
#define TIMG_T0_USE_XTAL    (BIT(9))
#define TIMG_T0_USE_XTAL_M  (TIMG_T0_USE_XTAL_V << TIMG_T0_USE_XTAL_S)
#define TIMG_T0_USE_XTAL_V  0x00000001U
#define TIMG_T0_USE_XTAL_S  9
/** TIMG_T0_ALARM_EN : R/W/SC; bitpos: [10]; default: 0;
 *  When set, the alarm is enabled. This bit is automatically cleared once an
 *  alarm occurs.
 */
#define TIMG_T0_ALARM_EN    (BIT(10))
#define TIMG_T0_ALARM_EN_M  (TIMG_T0_ALARM_EN_V << TIMG_T0_ALARM_EN_S)
#define TIMG_T0_ALARM_EN_V  0x00000001U
#define TIMG_T0_ALARM_EN_S  10
/** TIMG_T0_DIVIDER : R/W; bitpos: [28:13]; default: 1;
 *  Timer 0 clock (T0_clk) prescaler value.
 */
#define TIMG_T0_DIVIDER    0x0000FFFFU
#define TIMG_T0_DIVIDER_M  (TIMG_T0_DIVIDER_V << TIMG_T0_DIVIDER_S)
#define TIMG_T0_DIVIDER_V  0x0000FFFFU
#define TIMG_T0_DIVIDER_S  13
/** TIMG_T0_AUTORELOAD : R/W; bitpos: [29]; default: 1;
 *  When set, timer 0 auto-reload at alarm is enabled.
 */
#define TIMG_T0_AUTORELOAD    (BIT(29))
#define TIMG_T0_AUTORELOAD_M  (TIMG_T0_AUTORELOAD_V << TIMG_T0_AUTORELOAD_S)
#define TIMG_T0_AUTORELOAD_V  0x00000001U
#define TIMG_T0_AUTORELOAD_S  29
/** TIMG_T0_INCREASE : R/W; bitpos: [30]; default: 1;
 *  When set, the timer 0 time-base counter will increment every clock tick. When
 *  cleared, the timer 0 time-base counter will decrement.
 */
#define TIMG_T0_INCREASE    (BIT(30))
#define TIMG_T0_INCREASE_M  (TIMG_T0_INCREASE_V << TIMG_T0_INCREASE_S)
#define TIMG_T0_INCREASE_V  0x00000001U
#define TIMG_T0_INCREASE_S  30
/** TIMG_T0_EN : R/W; bitpos: [31]; default: 0;
 *  When set, the timer 0 time-base counter is enabled.
 */
#define TIMG_T0_EN    (BIT(31))
#define TIMG_T0_EN_M  (TIMG_T0_EN_V << TIMG_T0_EN_S)
#define TIMG_T0_EN_V  0x00000001U
#define TIMG_T0_EN_S  31

/** TIMG_T0LO_REG register
 *  Timer 0 current value, low 32 bits
 */
#define TIMG_T0LO_REG(i) (REG_TIMG_BASE(i) + 0x4)
/** TIMG_T0_LO : RO; bitpos: [31:0]; default: 0;
 *  After writing to TIMG_T0UPDATE_REG, the low 32 bits of the time-base counter
 *  of timer 0 can be read here.
 */
#define TIMG_T0_LO    0xFFFFFFFFU
#define TIMG_T0_LO_M  (TIMG_T0_LO_V << TIMG_T0_LO_S)
#define TIMG_T0_LO_V  0xFFFFFFFFU
#define TIMG_T0_LO_S  0

/** TIMG_T0HI_REG register
 *  Timer 0 current value, high 22 bits
 */
#define TIMG_T0HI_REG(i) (REG_TIMG_BASE(i) + 0x8)
/** TIMG_T0_HI : RO; bitpos: [21:0]; default: 0;
 *  After writing to TIMG_T0UPDATE_REG, the high 22 bits of the time-base counter
 *  of timer 0 can be read here.
 */
#define TIMG_T0_HI    0x003FFFFFU
#define TIMG_T0_HI_M  (TIMG_T0_HI_V << TIMG_T0_HI_S)
#define TIMG_T0_HI_V  0x003FFFFFU
#define TIMG_T0_HI_S  0

/** TIMG_T0UPDATE_REG register
 *  Write to copy current timer value to TIMGn_T0_(LO/HI)_REG
 */
#define TIMG_T0UPDATE_REG(i) (REG_TIMG_BASE(i) + 0xc)
/** TIMG_T0_UPDATE : R/W/SC; bitpos: [31]; default: 0;
 *  After writing 0 or 1 to TIMG_T0UPDATE_REG, the counter value is latched.
 */
#define TIMG_T0_UPDATE    (BIT(31))
#define TIMG_T0_UPDATE_M  (TIMG_T0_UPDATE_V << TIMG_T0_UPDATE_S)
#define TIMG_T0_UPDATE_V  0x00000001U
#define TIMG_T0_UPDATE_S  31

/** TIMG_T0ALARMLO_REG register
 *  Timer 0 alarm value, low 32 bits
 */
#define TIMG_T0ALARMLO_REG(i) (REG_TIMG_BASE(i) + 0x10)
/** TIMG_T0_ALARM_LO : R/W; bitpos: [31:0]; default: 0;
 *  Timer 0 alarm trigger time-base counter value, low 32 bits.
 */
#define TIMG_T0_ALARM_LO    0xFFFFFFFFU
#define TIMG_T0_ALARM_LO_M  (TIMG_T0_ALARM_LO_V << TIMG_T0_ALARM_LO_S)
#define TIMG_T0_ALARM_LO_V  0xFFFFFFFFU
#define TIMG_T0_ALARM_LO_S  0

/** TIMG_T0ALARMHI_REG register
 *  Timer 0 alarm value, high bits
 */
#define TIMG_T0ALARMHI_REG(i) (REG_TIMG_BASE(i) + 0x14)
/** TIMG_T0_ALARM_HI : R/W; bitpos: [21:0]; default: 0;
 *  Timer 0 alarm trigger time-base counter value, high 22 bits.
 */
#define TIMG_T0_ALARM_HI    0x003FFFFFU
#define TIMG_T0_ALARM_HI_M  (TIMG_T0_ALARM_HI_V << TIMG_T0_ALARM_HI_S)
#define TIMG_T0_ALARM_HI_V  0x003FFFFFU
#define TIMG_T0_ALARM_HI_S  0

/** TIMG_T0LOADLO_REG register
 *  Timer 0 reload value, low 32 bits
 */
#define TIMG_T0LOADLO_REG(i) (REG_TIMG_BASE(i) + 0x18)
/** TIMG_T0_LOAD_LO : R/W; bitpos: [31:0]; default: 0;
 *  Low 32 bits of the value that a reload will load onto timer 0 time-base
 *  Counter.
 */
#define TIMG_T0_LOAD_LO    0xFFFFFFFFU
#define TIMG_T0_LOAD_LO_M  (TIMG_T0_LOAD_LO_V << TIMG_T0_LOAD_LO_S)
#define TIMG_T0_LOAD_LO_V  0xFFFFFFFFU
#define TIMG_T0_LOAD_LO_S  0

/** TIMG_T0LOADHI_REG register
 *  Timer 0 reload value, high 22 bits
 */
#define TIMG_T0LOADHI_REG(i) (REG_TIMG_BASE(i) + 0x1c)
/** TIMG_T0_LOAD_HI : R/W; bitpos: [21:0]; default: 0;
 *  High 22 bits of the value that a reload will load onto timer 0 time-base
 *  counter.
 */
#define TIMG_T0_LOAD_HI    0x003FFFFFU
#define TIMG_T0_LOAD_HI_M  (TIMG_T0_LOAD_HI_V << TIMG_T0_LOAD_HI_S)
#define TIMG_T0_LOAD_HI_V  0x003FFFFFU
#define TIMG_T0_LOAD_HI_S  0

/** TIMG_T0LOAD_REG register
 *  Write to reload timer from TIMG_T0_(LOADLOLOADHI)_REG
 */
#define TIMG_T0LOAD_REG(i) (REG_TIMG_BASE(i) + 0x20)
/** TIMG_T0_LOAD : WT; bitpos: [31:0]; default: 0;
 *
 *  Write any value to trigger a timer 0 time-base counter reload.
 */
#define TIMG_T0_LOAD    0xFFFFFFFFU
#define TIMG_T0_LOAD_M  (TIMG_T0_LOAD_V << TIMG_T0_LOAD_S)
#define TIMG_T0_LOAD_V  0xFFFFFFFFU
#define TIMG_T0_LOAD_S  0

/** TIMG_T1CONFIG_REG register
 *  Timer 1 configuration register
 */
#define TIMG_T1CONFIG_REG(i) (REG_TIMG_BASE(i) + 0x24)
/** TIMG_T1_USE_XTAL : R/W; bitpos: [9]; default: 0;
 *  1: Use XTAL_CLK as the source clock of timer group. 0: Use APB_CLK as the source
 *  clock of timer group.
 */
#define TIMG_T1_USE_XTAL    (BIT(9))
#define TIMG_T1_USE_XTAL_M  (TIMG_T1_USE_XTAL_V << TIMG_T1_USE_XTAL_S)
#define TIMG_T1_USE_XTAL_V  0x00000001U
#define TIMG_T1_USE_XTAL_S  9
/** TIMG_T1_ALARM_EN : R/W/SC; bitpos: [10]; default: 0;
 *  When set, the alarm is enabled. This bit is automatically cleared once an
 *  alarm occurs.
 */
#define TIMG_T1_ALARM_EN    (BIT(10))
#define TIMG_T1_ALARM_EN_M  (TIMG_T1_ALARM_EN_V << TIMG_T1_ALARM_EN_S)
#define TIMG_T1_ALARM_EN_V  0x00000001U
#define TIMG_T1_ALARM_EN_S  10
/** TIMG_T1_DIVIDER : R/W; bitpos: [28:13]; default: 1;
 *  Timer 1 clock (T1_clk) prescaler value.
 */
#define TIMG_T1_DIVIDER    0x0000FFFFU
#define TIMG_T1_DIVIDER_M  (TIMG_T1_DIVIDER_V << TIMG_T1_DIVIDER_S)
#define TIMG_T1_DIVIDER_V  0x0000FFFFU
#define TIMG_T1_DIVIDER_S  13
/** TIMG_T1_AUTORELOAD : R/W; bitpos: [29]; default: 1;
 *  When set, timer 1 auto-reload at alarm is enabled.
 */
#define TIMG_T1_AUTORELOAD    (BIT(29))
#define TIMG_T1_AUTORELOAD_M  (TIMG_T1_AUTORELOAD_V << TIMG_T1_AUTORELOAD_S)
#define TIMG_T1_AUTORELOAD_V  0x00000001U
#define TIMG_T1_AUTORELOAD_S  29
/** TIMG_T1_INCREASE : R/W; bitpos: [30]; default: 1;
 *  When set, the timer 1 time-base counter will increment every clock tick. When
 *  cleared, the timer 1 time-base counter will decrement.
 */
#define TIMG_T1_INCREASE    (BIT(30))
#define TIMG_T1_INCREASE_M  (TIMG_T1_INCREASE_V << TIMG_T1_INCREASE_S)
#define TIMG_T1_INCREASE_V  0x00000001U
#define TIMG_T1_INCREASE_S  30
/** TIMG_T1_EN : R/W; bitpos: [31]; default: 0;
 *  When set, the timer 1 time-base counter is enabled.
 */
#define TIMG_T1_EN    (BIT(31))
#define TIMG_T1_EN_M  (TIMG_T1_EN_V << TIMG_T1_EN_S)
#define TIMG_T1_EN_V  0x00000001U
#define TIMG_T1_EN_S  31

/** TIMG_T1LO_REG register
 *  Timer 1 current value, low 32 bits
 */
#define TIMG_T1LO_REG(i) (REG_TIMG_BASE(i) + 0x28)
/** TIMG_T1_LO : RO; bitpos: [31:0]; default: 0;
 *  After writing to TIMG_T1UPDATE_REG, the low 32 bits of the time-base counter
 *  of timer 1 can be read here.
 */
#define TIMG_T1_LO    0xFFFFFFFFU
#define TIMG_T1_LO_M  (TIMG_T1_LO_V << TIMG_T1_LO_S)
#define TIMG_T1_LO_V  0xFFFFFFFFU
#define TIMG_T1_LO_S  0

/** TIMG_T1HI_REG register
 *  Timer 1 current value, high 22 bits
 */
#define TIMG_T1HI_REG(i) (REG_TIMG_BASE(i) + 0x2c)
/** TIMG_T1_HI : RO; bitpos: [21:0]; default: 0;
 *  After writing to TIMG_T1UPDATE_REG, the high 22 bits of the time-base counter
 *  of timer 1 can be read here.
 */
#define TIMG_T1_HI    0x003FFFFFU
#define TIMG_T1_HI_M  (TIMG_T1_HI_V << TIMG_T1_HI_S)
#define TIMG_T1_HI_V  0x003FFFFFU
#define TIMG_T1_HI_S  0

/** TIMG_T1UPDATE_REG register
 *  Write to copy current timer value to TIMGn_T1_(LO/HI)_REG
 */
#define TIMG_T1UPDATE_REG(i) (REG_TIMG_BASE(i) + 0x30)
/** TIMG_T1_UPDATE : R/W/SC; bitpos: [31]; default: 0;
 *  After writing 0 or 1 to TIMG_T1UPDATE_REG, the counter value is latched.
 */
#define TIMG_T1_UPDATE    (BIT(31))
#define TIMG_T1_UPDATE_M  (TIMG_T1_UPDATE_V << TIMG_T1_UPDATE_S)
#define TIMG_T1_UPDATE_V  0x00000001U
#define TIMG_T1_UPDATE_S  31

/** TIMG_T1ALARMLO_REG register
 *  Timer 1 alarm value, low 32 bits
 */
#define TIMG_T1ALARMLO_REG(i) (REG_TIMG_BASE(i) + 0x34)
/** TIMG_T1_ALARM_LO : R/W; bitpos: [31:0]; default: 0;
 *  Timer 1 alarm trigger time-base counter value, low 32 bits.
 */
#define TIMG_T1_ALARM_LO    0xFFFFFFFFU
#define TIMG_T1_ALARM_LO_M  (TIMG_T1_ALARM_LO_V << TIMG_T1_ALARM_LO_S)
#define TIMG_T1_ALARM_LO_V  0xFFFFFFFFU
#define TIMG_T1_ALARM_LO_S  0

/** TIMG_T1ALARMHI_REG register
 *  Timer 1 alarm value, high bits
 */
#define TIMG_T1ALARMHI_REG(i) (REG_TIMG_BASE(i) + 0x38)
/** TIMG_T1_ALARM_HI : R/W; bitpos: [21:0]; default: 0;
 *  Timer 1 alarm trigger time-base counter value, high 22 bits.
 */
#define TIMG_T1_ALARM_HI    0x003FFFFFU
#define TIMG_T1_ALARM_HI_M  (TIMG_T1_ALARM_HI_V << TIMG_T1_ALARM_HI_S)
#define TIMG_T1_ALARM_HI_V  0x003FFFFFU
#define TIMG_T1_ALARM_HI_S  0

/** TIMG_T1LOADLO_REG register
 *  Timer 1 reload value, low 32 bits
 */
#define TIMG_T1LOADLO_REG(i) (REG_TIMG_BASE(i) + 0x3c)
/** TIMG_T1_LOAD_LO : R/W; bitpos: [31:0]; default: 0;
 *  Low 32 bits of the value that a reload will load onto timer 1 time-base
 *  Counter.
 */
#define TIMG_T1_LOAD_LO    0xFFFFFFFFU
#define TIMG_T1_LOAD_LO_M  (TIMG_T1_LOAD_LO_V << TIMG_T1_LOAD_LO_S)
#define TIMG_T1_LOAD_LO_V  0xFFFFFFFFU
#define TIMG_T1_LOAD_LO_S  0

/** TIMG_T1LOADHI_REG register
 *  Timer 1 reload value, high 22 bits
 */
#define TIMG_T1LOADHI_REG(i) (REG_TIMG_BASE(i) + 0x40)
/** TIMG_T1_LOAD_HI : R/W; bitpos: [21:0]; default: 0;
 *  High 22 bits of the value that a reload will load onto timer 1 time-base
 *  counter.
 */
#define TIMG_T1_LOAD_HI    0x003FFFFFU
#define TIMG_T1_LOAD_HI_M  (TIMG_T1_LOAD_HI_V << TIMG_T1_LOAD_HI_S)
#define TIMG_T1_LOAD_HI_V  0x003FFFFFU
#define TIMG_T1_LOAD_HI_S  0

/** TIMG_T1LOAD_REG register
 *  Write to reload timer from TIMG_T1_(LOADLOLOADHI)_REG
 */
#define TIMG_T1LOAD_REG(i) (REG_TIMG_BASE(i) + 0x44)
/** TIMG_T1_LOAD : WT; bitpos: [31:0]; default: 0;
 *
 *  Write any value to trigger a timer 1 time-base counter reload.
 */
#define TIMG_T1_LOAD    0xFFFFFFFFU
#define TIMG_T1_LOAD_M  (TIMG_T1_LOAD_V << TIMG_T1_LOAD_S)
#define TIMG_T1_LOAD_V  0xFFFFFFFFU
#define TIMG_T1_LOAD_S  0

/** TIMG_WDTCONFIG0_REG register
 *  Watchdog timer configuration register
 */
#define TIMG_WDTCONFIG0_REG(i) (REG_TIMG_BASE(i) + 0x48)
/** TIMG_WDT_APPCPU_RESET_EN : R/W; bitpos: [12]; default: 0;
 *  Reserved
 */
#define TIMG_WDT_APPCPU_RESET_EN    (BIT(12))
#define TIMG_WDT_APPCPU_RESET_EN_M  (TIMG_WDT_APPCPU_RESET_EN_V << TIMG_WDT_APPCPU_RESET_EN_S)
#define TIMG_WDT_APPCPU_RESET_EN_V  0x00000001U
#define TIMG_WDT_APPCPU_RESET_EN_S  12
/** TIMG_WDT_PROCPU_RESET_EN : R/W; bitpos: [13]; default: 0;
 *  WDT reset CPU enable.
 */
#define TIMG_WDT_PROCPU_RESET_EN    (BIT(13))
#define TIMG_WDT_PROCPU_RESET_EN_M  (TIMG_WDT_PROCPU_RESET_EN_V << TIMG_WDT_PROCPU_RESET_EN_S)
#define TIMG_WDT_PROCPU_RESET_EN_V  0x00000001U
#define TIMG_WDT_PROCPU_RESET_EN_S  13
/** TIMG_WDT_FLASHBOOT_MOD_EN : R/W; bitpos: [14]; default: 1;
 *  When set, Flash boot protection is enabled.
 */
#define TIMG_WDT_FLASHBOOT_MOD_EN    (BIT(14))
#define TIMG_WDT_FLASHBOOT_MOD_EN_M  (TIMG_WDT_FLASHBOOT_MOD_EN_V << TIMG_WDT_FLASHBOOT_MOD_EN_S)
#define TIMG_WDT_FLASHBOOT_MOD_EN_V  0x00000001U
#define TIMG_WDT_FLASHBOOT_MOD_EN_S  14
/** TIMG_WDT_SYS_RESET_LENGTH : R/W; bitpos: [17:15]; default: 1;
 *  System reset signal length selection. 0: 100 ns, 1: 200 ns,
 *  2: 300 ns, 3: 400 ns, 4: 500 ns, 5: 800 ns, 6: 1.6 us, 7: 3.2 us.
 */
#define TIMG_WDT_SYS_RESET_LENGTH    0x00000007U
#define TIMG_WDT_SYS_RESET_LENGTH_M  (TIMG_WDT_SYS_RESET_LENGTH_V << TIMG_WDT_SYS_RESET_LENGTH_S)
#define TIMG_WDT_SYS_RESET_LENGTH_V  0x00000007U
#define TIMG_WDT_SYS_RESET_LENGTH_S  15
/** TIMG_WDT_CPU_RESET_LENGTH : R/W; bitpos: [20:18]; default: 1;
 *  CPU reset signal length selection. 0: 100 ns, 1: 200 ns,
 *  2: 300 ns, 3: 400 ns, 4: 500 ns, 5: 800 ns, 6: 1.6 us, 7: 3.2 us.
 */
#define TIMG_WDT_CPU_RESET_LENGTH    0x00000007U
#define TIMG_WDT_CPU_RESET_LENGTH_M  (TIMG_WDT_CPU_RESET_LENGTH_V << TIMG_WDT_CPU_RESET_LENGTH_S)
#define TIMG_WDT_CPU_RESET_LENGTH_V  0x00000007U
#define TIMG_WDT_CPU_RESET_LENGTH_S  18
/** TIMG_WDT_STG3 : R/W; bitpos: [24:23]; default: 0;
 *  Stage 3 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
 */
#define TIMG_WDT_STG3    0x00000003U
#define TIMG_WDT_STG3_M  (TIMG_WDT_STG3_V << TIMG_WDT_STG3_S)
#define TIMG_WDT_STG3_V  0x00000003U
#define TIMG_WDT_STG3_S  23
/** TIMG_WDT_STG2 : R/W; bitpos: [26:25]; default: 0;
 *  Stage 2 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
 */
#define TIMG_WDT_STG2    0x00000003U
#define TIMG_WDT_STG2_M  (TIMG_WDT_STG2_V << TIMG_WDT_STG2_S)
#define TIMG_WDT_STG2_V  0x00000003U
#define TIMG_WDT_STG2_S  25
/** TIMG_WDT_STG1 : R/W; bitpos: [28:27]; default: 0;
 *  Stage 1 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
 */
#define TIMG_WDT_STG1    0x00000003U
#define TIMG_WDT_STG1_M  (TIMG_WDT_STG1_V << TIMG_WDT_STG1_S)
#define TIMG_WDT_STG1_V  0x00000003U
#define TIMG_WDT_STG1_S  27
/** TIMG_WDT_STG0 : R/W; bitpos: [30:29]; default: 0;
 *  Stage 0 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
 */
#define TIMG_WDT_STG0    0x00000003U
#define TIMG_WDT_STG0_M  (TIMG_WDT_STG0_V << TIMG_WDT_STG0_S)
#define TIMG_WDT_STG0_V  0x00000003U
#define TIMG_WDT_STG0_S  29
/** TIMG_WDT_EN : R/W; bitpos: [31]; default: 0;
 *  When set, MWDT is enabled.
 */
#define TIMG_WDT_EN    (BIT(31))
#define TIMG_WDT_EN_M  (TIMG_WDT_EN_V << TIMG_WDT_EN_S)
#define TIMG_WDT_EN_V  0x00000001U
#define TIMG_WDT_EN_S  31

/** TIMG_WDTCONFIG1_REG register
 *  Watchdog timer prescaler register
 */
#define TIMG_WDTCONFIG1_REG(i) (REG_TIMG_BASE(i) + 0x4c)
/** TIMG_WDT_CLK_PRESCALE : R/W; bitpos: [31:16]; default: 1;
 *  MWDT clock prescaler value. MWDT clock period = 12.5 ns *
 *  TIMG_WDT_CLK_PRESCALE.
 */
#define TIMG_WDT_CLK_PRESCALE    0x0000FFFFU
#define TIMG_WDT_CLK_PRESCALE_M  (TIMG_WDT_CLK_PRESCALE_V << TIMG_WDT_CLK_PRESCALE_S)
#define TIMG_WDT_CLK_PRESCALE_V  0x0000FFFFU
#define TIMG_WDT_CLK_PRESCALE_S  16

/** TIMG_WDTCONFIG2_REG register
 *  Watchdog timer stage 0 timeout value
 */
#define TIMG_WDTCONFIG2_REG(i) (REG_TIMG_BASE(i) + 0x50)
/** TIMG_WDT_STG0_HOLD : R/W; bitpos: [31:0]; default: 26000000;
 *  Stage 0 timeout value, in MWDT clock cycles.
 */
#define TIMG_WDT_STG0_HOLD    0xFFFFFFFFU
#define TIMG_WDT_STG0_HOLD_M  (TIMG_WDT_STG0_HOLD_V << TIMG_WDT_STG0_HOLD_S)
#define TIMG_WDT_STG0_HOLD_V  0xFFFFFFFFU
#define TIMG_WDT_STG0_HOLD_S  0

/** TIMG_WDTCONFIG3_REG register
 *  Watchdog timer stage 1 timeout value
 */
#define TIMG_WDTCONFIG3_REG(i) (REG_TIMG_BASE(i) + 0x54)
/** TIMG_WDT_STG1_HOLD : R/W; bitpos: [31:0]; default: 134217727;
 *  Stage 1 timeout value, in MWDT clock cycles.
 */
#define TIMG_WDT_STG1_HOLD    0xFFFFFFFFU
#define TIMG_WDT_STG1_HOLD_M  (TIMG_WDT_STG1_HOLD_V << TIMG_WDT_STG1_HOLD_S)
#define TIMG_WDT_STG1_HOLD_V  0xFFFFFFFFU
#define TIMG_WDT_STG1_HOLD_S  0

/** TIMG_WDTCONFIG4_REG register
 *  Watchdog timer stage 2 timeout value
 */
#define TIMG_WDTCONFIG4_REG(i) (REG_TIMG_BASE(i) + 0x58)
/** TIMG_WDT_STG2_HOLD : R/W; bitpos: [31:0]; default: 1048575;
 *  Stage 2 timeout value, in MWDT clock cycles.
 */
#define TIMG_WDT_STG2_HOLD    0xFFFFFFFFU
#define TIMG_WDT_STG2_HOLD_M  (TIMG_WDT_STG2_HOLD_V << TIMG_WDT_STG2_HOLD_S)
#define TIMG_WDT_STG2_HOLD_V  0xFFFFFFFFU
#define TIMG_WDT_STG2_HOLD_S  0

/** TIMG_WDTCONFIG5_REG register
 *  Watchdog timer stage 3 timeout value
 */
#define TIMG_WDTCONFIG5_REG(i) (REG_TIMG_BASE(i) + 0x5c)
/** TIMG_WDT_STG3_HOLD : R/W; bitpos: [31:0]; default: 1048575;
 *  Stage 3 timeout value, in MWDT clock cycles.
 */
#define TIMG_WDT_STG3_HOLD    0xFFFFFFFFU
#define TIMG_WDT_STG3_HOLD_M  (TIMG_WDT_STG3_HOLD_V << TIMG_WDT_STG3_HOLD_S)
#define TIMG_WDT_STG3_HOLD_V  0xFFFFFFFFU
#define TIMG_WDT_STG3_HOLD_S  0

/** TIMG_WDTFEED_REG register
 *  Write to feed the watchdog timer
 */
#define TIMG_WDTFEED_REG(i) (REG_TIMG_BASE(i) + 0x60)
/** TIMG_WDT_FEED : WT; bitpos: [31:0]; default: 0;
 *  Write any value to feed the MWDT. (WO)
 */
#define TIMG_WDT_FEED    0xFFFFFFFFU
#define TIMG_WDT_FEED_M  (TIMG_WDT_FEED_V << TIMG_WDT_FEED_S)
#define TIMG_WDT_FEED_V  0xFFFFFFFFU
#define TIMG_WDT_FEED_S  0

/** TIMG_WDTWPROTECT_REG register
 *  Watchdog write protect register
 */
#define TIMG_WDTWPROTECT_REG(i) (REG_TIMG_BASE(i) + 0x64)
/** TIMG_WDT_WKEY : R/W; bitpos: [31:0]; default: 1356348065;
 *  If the register contains a different value than its reset value, write
 *  protection is enabled.
 */
#define TIMG_WDT_WKEY    0xFFFFFFFFU
#define TIMG_WDT_WKEY_M  (TIMG_WDT_WKEY_V << TIMG_WDT_WKEY_S)
#define TIMG_WDT_WKEY_V  0xFFFFFFFFU
#define TIMG_WDT_WKEY_S  0

/** TIMG_RTCCALICFG_REG register
 *  RTC calibration configure register
 */
#define TIMG_RTCCALICFG_REG(i) (REG_TIMG_BASE(i) + 0x68)
/** TIMG_RTC_CALI_START_CYCLING : R/W; bitpos: [12]; default: 1;
 *  Reserved
 */
#define TIMG_RTC_CALI_START_CYCLING    (BIT(12))
#define TIMG_RTC_CALI_START_CYCLING_M  (TIMG_RTC_CALI_START_CYCLING_V << TIMG_RTC_CALI_START_CYCLING_S)
#define TIMG_RTC_CALI_START_CYCLING_V  0x00000001U
#define TIMG_RTC_CALI_START_CYCLING_S  12
/** TIMG_RTC_CALI_CLK_SEL : R/W; bitpos: [14:13]; default: 1;
 *  0:rtc slow clock. 1:clk_80m.  2:xtal_32k.
 */
#define TIMG_RTC_CALI_CLK_SEL    0x00000003U
#define TIMG_RTC_CALI_CLK_SEL_M  (TIMG_RTC_CALI_CLK_SEL_V << TIMG_RTC_CALI_CLK_SEL_S)
#define TIMG_RTC_CALI_CLK_SEL_V  0x00000003U
#define TIMG_RTC_CALI_CLK_SEL_S  13
/** TIMG_RTC_CALI_RDY : RO; bitpos: [15]; default: 0;
 *  Reserved
 */
#define TIMG_RTC_CALI_RDY    (BIT(15))
#define TIMG_RTC_CALI_RDY_M  (TIMG_RTC_CALI_RDY_V << TIMG_RTC_CALI_RDY_S)
#define TIMG_RTC_CALI_RDY_V  0x00000001U
#define TIMG_RTC_CALI_RDY_S  15
/** TIMG_RTC_CALI_MAX : R/W; bitpos: [30:16]; default: 1;
 *  Reserved
 */
#define TIMG_RTC_CALI_MAX    0x00007FFFU
#define TIMG_RTC_CALI_MAX_M  (TIMG_RTC_CALI_MAX_V << TIMG_RTC_CALI_MAX_S)
#define TIMG_RTC_CALI_MAX_V  0x00007FFFU
#define TIMG_RTC_CALI_MAX_S  16
/** TIMG_RTC_CALI_START : R/W; bitpos: [31]; default: 0;
 *  Reserved
 */
#define TIMG_RTC_CALI_START    (BIT(31))
#define TIMG_RTC_CALI_START_M  (TIMG_RTC_CALI_START_V << TIMG_RTC_CALI_START_S)
#define TIMG_RTC_CALI_START_V  0x00000001U
#define TIMG_RTC_CALI_START_S  31

/** TIMG_RTCCALICFG1_REG register
 *  RTC calibration configure1 register
 */
#define TIMG_RTCCALICFG1_REG(i) (REG_TIMG_BASE(i) + 0x6c)
/** TIMG_RTC_CALI_CYCLING_DATA_VLD : RO; bitpos: [0]; default: 0;
 *  Reserved
 */
#define TIMG_RTC_CALI_CYCLING_DATA_VLD    (BIT(0))
#define TIMG_RTC_CALI_CYCLING_DATA_VLD_M  (TIMG_RTC_CALI_CYCLING_DATA_VLD_V << TIMG_RTC_CALI_CYCLING_DATA_VLD_S)
#define TIMG_RTC_CALI_CYCLING_DATA_VLD_V  0x00000001U
#define TIMG_RTC_CALI_CYCLING_DATA_VLD_S  0
/** TIMG_RTC_CALI_VALUE : RO; bitpos: [31:7]; default: 0;
 *  Reserved
 */
#define TIMG_RTC_CALI_VALUE    0x01FFFFFFU
#define TIMG_RTC_CALI_VALUE_M  (TIMG_RTC_CALI_VALUE_V << TIMG_RTC_CALI_VALUE_S)
#define TIMG_RTC_CALI_VALUE_V  0x01FFFFFFU
#define TIMG_RTC_CALI_VALUE_S  7

/** TIMG_INT_ENA_TIMERS_REG register
 *  Interrupt enable bits
 */
#define TIMG_INT_ENA_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x70)
/** TIMG_T0_INT_ENA : R/W; bitpos: [0]; default: 0;
 *  The interrupt enable bit for the TIMG_T0_INT interrupt.
 */
#define TIMG_T0_INT_ENA    (BIT(0))
#define TIMG_T0_INT_ENA_M  (TIMG_T0_INT_ENA_V << TIMG_T0_INT_ENA_S)
#define TIMG_T0_INT_ENA_V  0x00000001U
#define TIMG_T0_INT_ENA_S  0
/** TIMG_T1_INT_ENA : R/W; bitpos: [1]; default: 0;
 *  The interrupt enable bit for the TIMG_T1_INT interrupt.
 */
#define TIMG_T1_INT_ENA    (BIT(1))
#define TIMG_T1_INT_ENA_M  (TIMG_T1_INT_ENA_V << TIMG_T1_INT_ENA_S)
#define TIMG_T1_INT_ENA_V  0x00000001U
#define TIMG_T1_INT_ENA_S  1
/** TIMG_WDT_INT_ENA : R/W; bitpos: [2]; default: 0;
 *  The interrupt enable bit for the TIMG_WDT_INT interrupt.
 */
#define TIMG_WDT_INT_ENA    (BIT(2))
#define TIMG_WDT_INT_ENA_M  (TIMG_WDT_INT_ENA_V << TIMG_WDT_INT_ENA_S)
#define TIMG_WDT_INT_ENA_V  0x00000001U
#define TIMG_WDT_INT_ENA_S  2

/** TIMG_INT_RAW_TIMERS_REG register
 *  Raw interrupt status
 */
#define TIMG_INT_RAW_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x74)
/** TIMG_T0_INT_RAW : R/WTC/SS; bitpos: [0]; default: 0;
 *  The raw interrupt status bit for the TIMG_T0_INT interrupt.
 */
#define TIMG_T0_INT_RAW    (BIT(0))
#define TIMG_T0_INT_RAW_M  (TIMG_T0_INT_RAW_V << TIMG_T0_INT_RAW_S)
#define TIMG_T0_INT_RAW_V  0x00000001U
#define TIMG_T0_INT_RAW_S  0
/** TIMG_T1_INT_RAW : R/WTC/SS; bitpos: [1]; default: 0;
 *  The raw interrupt status bit for the TIMG_T1_INT interrupt.
 */
#define TIMG_T1_INT_RAW    (BIT(1))
#define TIMG_T1_INT_RAW_M  (TIMG_T1_INT_RAW_V << TIMG_T1_INT_RAW_S)
#define TIMG_T1_INT_RAW_V  0x00000001U
#define TIMG_T1_INT_RAW_S  1
/** TIMG_WDT_INT_RAW : R/WTC/SS; bitpos: [2]; default: 0;
 *  The raw interrupt status bit for the TIMG_WDT_INT interrupt.
 */
#define TIMG_WDT_INT_RAW    (BIT(2))
#define TIMG_WDT_INT_RAW_M  (TIMG_WDT_INT_RAW_V << TIMG_WDT_INT_RAW_S)
#define TIMG_WDT_INT_RAW_V  0x00000001U
#define TIMG_WDT_INT_RAW_S  2

/** TIMG_INT_ST_TIMERS_REG register
 *  Masked interrupt status
 */
#define TIMG_INT_ST_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x78)
/** TIMG_T0_INT_ST : RO; bitpos: [0]; default: 0;
 *  The masked interrupt status bit for the TIMG_T0_INT interrupt.
 */
#define TIMG_T0_INT_ST    (BIT(0))
#define TIMG_T0_INT_ST_M  (TIMG_T0_INT_ST_V << TIMG_T0_INT_ST_S)
#define TIMG_T0_INT_ST_V  0x00000001U
#define TIMG_T0_INT_ST_S  0
/** TIMG_T1_INT_ST : RO; bitpos: [1]; default: 0;
 *  The masked interrupt status bit for the TIMG_T1_INT interrupt.
 */
#define TIMG_T1_INT_ST    (BIT(1))
#define TIMG_T1_INT_ST_M  (TIMG_T1_INT_ST_V << TIMG_T1_INT_ST_S)
#define TIMG_T1_INT_ST_V  0x00000001U
#define TIMG_T1_INT_ST_S  1
/** TIMG_WDT_INT_ST : RO; bitpos: [2]; default: 0;
 *  The masked interrupt status bit for the TIMG_WDT_INT interrupt.
 */
#define TIMG_WDT_INT_ST    (BIT(2))
#define TIMG_WDT_INT_ST_M  (TIMG_WDT_INT_ST_V << TIMG_WDT_INT_ST_S)
#define TIMG_WDT_INT_ST_V  0x00000001U
#define TIMG_WDT_INT_ST_S  2

/** TIMG_INT_CLR_TIMERS_REG register
 *  Interrupt clear bits
 */
#define TIMG_INT_CLR_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x7c)
/** TIMG_T0_INT_CLR : WT; bitpos: [0]; default: 0;
 *  Set this bit to clear the TIMG_T0_INT interrupt.
 */
#define TIMG_T0_INT_CLR    (BIT(0))
#define TIMG_T0_INT_CLR_M  (TIMG_T0_INT_CLR_V << TIMG_T0_INT_CLR_S)
#define TIMG_T0_INT_CLR_V  0x00000001U
#define TIMG_T0_INT_CLR_S  0
/** TIMG_T1_INT_CLR : WT; bitpos: [1]; default: 0;
 *  Set this bit to clear the TIMG_T1_INT interrupt.
 */
#define TIMG_T1_INT_CLR    (BIT(1))
#define TIMG_T1_INT_CLR_M  (TIMG_T1_INT_CLR_V << TIMG_T1_INT_CLR_S)
#define TIMG_T1_INT_CLR_V  0x00000001U
#define TIMG_T1_INT_CLR_S  1
/** TIMG_WDT_INT_CLR : WT; bitpos: [2]; default: 0;
 *  Set this bit to clear the TIMG_WDT_INT interrupt.
 */
#define TIMG_WDT_INT_CLR    (BIT(2))
#define TIMG_WDT_INT_CLR_M  (TIMG_WDT_INT_CLR_V << TIMG_WDT_INT_CLR_S)
#define TIMG_WDT_INT_CLR_V  0x00000001U
#define TIMG_WDT_INT_CLR_S  2

/** TIMG_RTCCALICFG2_REG register
 *  Timer group calibration register
 */
#define TIMG_RTCCALICFG2_REG(i) (REG_TIMG_BASE(i) + 0x80)
/** TIMG_RTC_CALI_TIMEOUT : RO; bitpos: [0]; default: 0;
 *  RTC calibration timeout indicator
 */
#define TIMG_RTC_CALI_TIMEOUT    (BIT(0))
#define TIMG_RTC_CALI_TIMEOUT_M  (TIMG_RTC_CALI_TIMEOUT_V << TIMG_RTC_CALI_TIMEOUT_S)
#define TIMG_RTC_CALI_TIMEOUT_V  0x00000001U
#define TIMG_RTC_CALI_TIMEOUT_S  0
/** TIMG_RTC_CALI_TIMEOUT_RST_CNT : R/W; bitpos: [6:3]; default: 3;
 *  Cycles that release calibration timeout reset
 */
#define TIMG_RTC_CALI_TIMEOUT_RST_CNT    0x0000000FU
#define TIMG_RTC_CALI_TIMEOUT_RST_CNT_M  (TIMG_RTC_CALI_TIMEOUT_RST_CNT_V << TIMG_RTC_CALI_TIMEOUT_RST_CNT_S)
#define TIMG_RTC_CALI_TIMEOUT_RST_CNT_V  0x0000000FU
#define TIMG_RTC_CALI_TIMEOUT_RST_CNT_S  3
/** TIMG_RTC_CALI_TIMEOUT_THRES : R/W; bitpos: [31:7]; default: 33554431;
 *  Threshold value for the RTC calibration timer. If the calibration timer's value
 *  exceeds this threshold, a timeout is triggered.
 */
#define TIMG_RTC_CALI_TIMEOUT_THRES    0x01FFFFFFU
#define TIMG_RTC_CALI_TIMEOUT_THRES_M  (TIMG_RTC_CALI_TIMEOUT_THRES_V << TIMG_RTC_CALI_TIMEOUT_THRES_S)
#define TIMG_RTC_CALI_TIMEOUT_THRES_V  0x01FFFFFFU
#define TIMG_RTC_CALI_TIMEOUT_THRES_S  7

/** TIMG_NTIMERS_DATE_REG register
 *  Timer version control register
 */
#define TIMG_NTIMERS_DATE_REG(i) (REG_TIMG_BASE(i) + 0xf8)
/** TIMG_NTIMERS_DATE : R/W; bitpos: [27:0]; default: 33566833;
 *  Timer version control register
 */
#define TIMG_NTIMERS_DATE    0x0FFFFFFFU
#define TIMG_NTIMERS_DATE_M  (TIMG_NTIMERS_DATE_V << TIMG_NTIMERS_DATE_S)
#define TIMG_NTIMERS_DATE_V  0x0FFFFFFFU
#define TIMG_NTIMERS_DATE_S  0

/** TIMG_REGCLK_REG register
 *  Timer group clock gate register
 */
#define TIMG_REGCLK_REG(i) (REG_TIMG_BASE(i) + 0xfc)
/** TIMG_CLK_EN : R/W; bitpos: [31]; default: 0;
 *  Register clock gate signal. 1: The clock for software to read and write registers
 *  is always on. 0: The clock for software to read and write registers only exits when
 *  the operation happens.
 */
#define TIMG_CLK_EN    (BIT(31))
#define TIMG_CLK_EN_M  (TIMG_CLK_EN_V << TIMG_CLK_EN_S)
#define TIMG_CLK_EN_V  0x00000001U
#define TIMG_CLK_EN_S  31

#ifdef __cplusplus
}
#endif