esp-idf/components/heap/port/esp32c2/memory_layout.c

93 lines
4.6 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef BOOTLOADER_BUILD
#include <stdint.h>
#include <stdlib.h>
#include "esp_attr.h"
#include "sdkconfig.h"
#include "soc/soc.h"
#include "soc/soc_memory_layout.h"
#include "esp_heap_caps.h"
/**
* @brief Memory type descriptors. These describe the capabilities of a type of memory in the SoC.
* Each type of memory map consists of one or more regions in the address space.
* Each type contains an array of prioritized capabilities.
* Types with later entries are only taken if earlier ones can't fulfill the memory request.
*
* - For a normal malloc (MALLOC_CAP_DEFAULT), give away the DRAM-only memory first, then pass off any dual-use IRAM regions, finally eat into the application memory.
* - For a malloc where 32-bit-aligned-only access is okay, first allocate IRAM, then DRAM, finally application IRAM.
* - Application mallocs (PIDx) will allocate IRAM first, if possible, then DRAM.
* - Most other malloc caps only fit in one region anyway.
*
*/
// IDF-4299
const soc_memory_type_desc_t soc_memory_types[] = {
// Type 0: DRAM
{ "DRAM", { MALLOC_CAP_8BIT | MALLOC_CAP_DEFAULT, MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA | MALLOC_CAP_32BIT, 0 }, false, false},
// Type 1: DRAM used for startup stacks
{ "STACK/DRAM", { MALLOC_CAP_8BIT | MALLOC_CAP_DEFAULT, MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA | MALLOC_CAP_32BIT, MALLOC_CAP_RETENTION }, false, true},
// Type 2: DRAM which has an alias on the I-port
{ "D/IRAM", { 0, MALLOC_CAP_DMA | MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL | MALLOC_CAP_DEFAULT, MALLOC_CAP_32BIT | MALLOC_CAP_EXEC }, true, false},
// Type 3: IRAM
{ "IRAM", { MALLOC_CAP_EXEC | MALLOC_CAP_32BIT | MALLOC_CAP_INTERNAL, 0, 0 }, false, false},
};
#define SOC_MEMORY_TYPE_DEFAULT 2
const size_t soc_memory_type_count = sizeof(soc_memory_types) / sizeof(soc_memory_type_desc_t);
/**
* @brief Region descriptors. These describe all regions of memory available, and map them to a type in the above type.
*
* @note Because of requirements in the coalescing code which merges adjacent regions,
* this list should always be sorted from low to high by start address.
*
*/
#define RAM_BOTTOM_LEVEL_REUSE_SIZE 0x18000
#define RAM_BOTTOM_LEVEL_RESERVE_SIZE 0x8000
#define MIN_ADDR_OF_STARTUP_STACK_TOP 0x3FCD81D0 //TODO: IDF-4585
/*|------------------------------------ SRAM LEVEL 3 -------------------------------------|*/
/*|0x3FCC0000 0x3FCDFFFF|*/
/*|------------------------------------------------|--------------------------|-------------|*/
/*| Shared Buffer | Startup Stack | Interface |*/
/*|------------------------------------------------|--------------------------|-------------|*/
/*| <---RAM_BOTTOM_LEVEL_REUSE_SIZE---> | <---------RAM_BOTTOM_LEVEL_RESERVE_SIZE---------> |*/
/*|-----------------------------------------------------------------------------------------|*/
const soc_memory_region_t soc_memory_regions[] = {
{ 0x3FCA0000, 0x10000, SOC_MEMORY_TYPE_DEFAULT, 0x40380000}, //Block 1, can be remapped to ROM, can be used as trace memory
{ 0x3FCB0000, 0x10000, SOC_MEMORY_TYPE_DEFAULT, 0x40390000}, //Block 2, can be remapped to ROM, can be used as trace memory
{ 0x3FCC0000, RAM_BOTTOM_LEVEL_REUSE_SIZE, SOC_MEMORY_TYPE_DEFAULT, 0x403A0000}, //Block 3, can be remapped to ROM, can be used as trace memory
{ 0x3FCC0000 + RAM_BOTTOM_LEVEL_REUSE_SIZE, RAM_BOTTOM_LEVEL_RESERVE_SIZE, 1, 0x403A0000 + RAM_BOTTOM_LEVEL_REUSE_SIZE} //Block 4, can be used as trace memory
};
_Static_assert(0x3FCC0000 + RAM_BOTTOM_LEVEL_REUSE_SIZE <= MIN_ADDR_OF_STARTUP_STACK_TOP, "Heap reuse area overlaps startup stack");
const size_t soc_memory_region_count = sizeof(soc_memory_regions) / sizeof(soc_memory_region_t);
extern int _data_start, _heap_start, _iram_start, _iram_end;
/**
* Reserved memory regions.
* These are removed from the soc_memory_regions array when heaps are created.
*
*/
// Static data region. DRAM used by data+bss and possibly rodata
SOC_RESERVE_MEMORY_REGION((intptr_t)&_data_start, (intptr_t)&_heap_start, dram_data);
// Target has a big D/IRAM region, the part used by code is reserved
// The address of the D/I bus are in the same order, directly shift IRAM address to get reserved DRAM address
#define I_D_OFFSET (SOC_DIRAM_IRAM_LOW - SOC_DIRAM_DRAM_LOW)
SOC_RESERVE_MEMORY_REGION((intptr_t)&_iram_start - I_D_OFFSET, (intptr_t)&_iram_end - I_D_OFFSET, iram_code);
#endif // BOOTLOADER_BUILD