esp-idf/components/bt/bluedroid/stack/sdp/sdp_utils.c

/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This file contains SDP utility functions
 *
 ******************************************************************************/

#include <stdlib.h>
#include <string.h>

#include "osi/allocator.h"

#include "common/bt_defs.h"

#include "stack/bt_types.h"

#include "stack/l2cdefs.h"
#include "stack/hcidefs.h"
#include "stack/hcimsgs.h"

#include "stack/sdp_api.h"
#include "sdpint.h"

#include "stack/btu.h"

#if (SDP_INCLUDED == TRUE)
static const UINT8  sdp_base_uuid[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00,
                                       0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB
                                      };

/*******************************************************************************
**
** Function         sdpu_find_ccb_by_cid
**
** Description      This function searches the CCB table for an entry with the
**                  passed CID.
**
** Returns          the CCB address, or NULL if not found.
**
*******************************************************************************/
tCONN_CB *sdpu_find_ccb_by_cid (UINT16 cid)
{
    UINT16       xx;
    tCONN_CB     *p_ccb;

    /* Look through each connection control block */
    for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) {
        if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->connection_id == cid)) {
            return (p_ccb);
        }
    }

    /* If here, not found */
    return (NULL);
}


/*******************************************************************************
**
** Function         sdpu_find_ccb_by_db
**
** Description      This function searches the CCB table for an entry with the
**                  passed discovery db.
**
** Returns          the CCB address, or NULL if not found.
**
*******************************************************************************/
tCONN_CB *sdpu_find_ccb_by_db (tSDP_DISCOVERY_DB *p_db)
{
#if SDP_CLIENT_ENABLED == TRUE
    UINT16       xx;
    tCONN_CB     *p_ccb;

    if (p_db) {
        /* Look through each connection control block */
        for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) {
            if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->p_db == p_db)) {
                return (p_ccb);
            }
        }
    }
#endif
    /* If here, not found */
    return (NULL);
}


/*******************************************************************************
**
** Function         sdpu_allocate_ccb
**
** Description      This function allocates a new CCB.
**
** Returns          CCB address, or NULL if none available.
**
*******************************************************************************/
tCONN_CB *sdpu_allocate_ccb (void)
{
    UINT16       xx;
    tCONN_CB     *p_ccb;

    /* Look through each connection control block for a free one */
    for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) {
        if (p_ccb->con_state == SDP_STATE_IDLE) {
            btu_free_timer(&p_ccb->timer_entry);
            memset (p_ccb, 0, sizeof (tCONN_CB));

            p_ccb->timer_entry.param = (UINT32) p_ccb;

            return (p_ccb);
        }
    }

    /* If here, no free CCB found */
    return (NULL);
}


/*******************************************************************************
**
** Function         sdpu_release_ccb
**
** Description      This function releases a CCB.
**
** Returns          void
**
*******************************************************************************/
void sdpu_release_ccb (tCONN_CB *p_ccb)
{
    /* Ensure timer is stopped and released */
    btu_free_timer(&p_ccb->timer_entry);

    /* Drop any response pointer we may be holding */
    p_ccb->con_state = SDP_STATE_IDLE;
#if SDP_CLIENT_ENABLED == TRUE
    p_ccb->is_attr_search = FALSE;
#endif

    /* Free the response buffer */
    if (p_ccb->rsp_list) {
        SDP_TRACE_DEBUG("releasing SDP rsp_list\n");

        osi_free(p_ccb->rsp_list);
        p_ccb->rsp_list = NULL;
    }
}


/*******************************************************************************
**
** Function         sdpu_build_attrib_seq
**
** Description      This function builds an attribute sequence from the list of
**                  passed attributes. It is also passed the address of the output
**                  buffer.
**
** Returns          Pointer to next byte in the output buffer.
**
*******************************************************************************/
UINT8 *sdpu_build_attrib_seq (UINT8 *p_out, UINT16 *p_attr, UINT16 num_attrs)
{
    UINT16  xx;

    /* First thing is the data element header. See if the length fits 1 byte */
    /* If no attributes, assume a 4-byte wildcard */
    if (!p_attr) {
        xx = 5;
    } else {
        xx = num_attrs * 3;
    }

    if (xx > 255) {
        UINT8_TO_BE_STREAM  (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
        UINT16_TO_BE_STREAM (p_out, xx);
    } else {
        UINT8_TO_BE_STREAM (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
        UINT8_TO_BE_STREAM (p_out, xx);
    }

    /* If there are no attributes specified, assume caller wants wildcard */
    if (!p_attr) {
        UINT8_TO_BE_STREAM  (p_out, (UINT_DESC_TYPE << 3) | SIZE_FOUR_BYTES);
        UINT16_TO_BE_STREAM (p_out, 0);
        UINT16_TO_BE_STREAM (p_out, 0xFFFF);
    } else {
        /* Loop through and put in all the attributes(s) */
        for (xx = 0; xx < num_attrs; xx++, p_attr++) {
            UINT8_TO_BE_STREAM  (p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
            UINT16_TO_BE_STREAM (p_out, *p_attr);
        }
    }

    return (p_out);
}


/*******************************************************************************
**
** Function         sdpu_build_attrib_entry
**
** Description      This function builds an attribute entry from the passed
**                  attribute record. It is also passed the address of the output
**                  buffer.
**
** Returns          Pointer to next byte in the output buffer.
**
*******************************************************************************/
UINT8 *sdpu_build_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr)
{
    /* First, store the attribute ID. Goes as a UINT */
    UINT8_TO_BE_STREAM  (p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM (p_out, p_attr->id);

    /* the attribute is in the db record.
     * assuming the attribute len is less than SDP_MAX_ATTR_LEN */
    switch (p_attr->type) {
    case TEXT_STR_DESC_TYPE:    /* 4 */
    case DATA_ELE_SEQ_DESC_TYPE:/* 6 */
    case DATA_ELE_ALT_DESC_TYPE:/* 7 */
    case URL_DESC_TYPE:         /* 8 */
#if (SDP_MAX_ATTR_LEN > 0xFFFF)
        if (p_attr->len > 0xFFFF) {
            UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_LONG);
            UINT32_TO_BE_STREAM (p_out, p_attr->len);
        } else

#endif /* 0xFFFF - 0xFF */
        {
#if (SDP_MAX_ATTR_LEN > 0xFF)
            if (p_attr->len > 0xFF) {
                UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_WORD);
                UINT16_TO_BE_STREAM (p_out, p_attr->len);
            } else

#endif /* 0xFF and less*/
            {
                UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE);
                UINT8_TO_BE_STREAM (p_out, p_attr->len);
            }
        }
        if (p_attr->value_ptr != NULL) {
            ARRAY_TO_BE_STREAM (p_out, p_attr->value_ptr, (int)p_attr->len);
        }

        return (p_out);
    }

    /* Now, store the attribute value */
    switch (p_attr->len) {
    case 1:
        UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_ONE_BYTE);
        break;
    case 2:
        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_TWO_BYTES);
        break;
    case 4:
        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_FOUR_BYTES);
        break;
    case 8:
        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_EIGHT_BYTES);
        break;
    case 16:
        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_SIXTEEN_BYTES);
        break;
    default:
        UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE);
        UINT8_TO_BE_STREAM (p_out, p_attr->len);
        break;
    }

    if (p_attr->value_ptr != NULL) {
        ARRAY_TO_BE_STREAM (p_out, p_attr->value_ptr, (int)p_attr->len);
    }

    return (p_out);
}


/*******************************************************************************
**
** Function         sdpu_build_n_send_error
**
** Description      This function builds and sends an error packet.
**
** Returns          void
**
*******************************************************************************/
void sdpu_build_n_send_error (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 error_code, char *p_error_text)
{
    UINT8           *p_rsp, *p_rsp_start, *p_rsp_param_len;
    UINT16          rsp_param_len;
    BT_HDR          *p_buf;


    SDP_TRACE_WARNING ("SDP - sdpu_build_n_send_error  code: 0x%x  CID: 0x%x\n",
                       error_code, p_ccb->connection_id);

    /* Get a buffer to use to build and send the packet to L2CAP */
    if ((p_buf = (BT_HDR *)osi_malloc(SDP_DATA_BUF_SIZE)) == NULL) {
        SDP_TRACE_ERROR ("SDP - no buf for err msg\n");
        return;
    }
    p_buf->offset = L2CAP_MIN_OFFSET;
    p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;

    UINT8_TO_BE_STREAM  (p_rsp, SDP_PDU_ERROR_RESPONSE);
    UINT16_TO_BE_STREAM  (p_rsp, trans_num);

    /* Skip the parameter length, we need to add it at the end */
    p_rsp_param_len = p_rsp;
    p_rsp += 2;

    UINT16_TO_BE_STREAM  (p_rsp, error_code);

    /* Unplugfest example traces do not have any error text */
    if (p_error_text) {
        ARRAY_TO_BE_STREAM (p_rsp, p_error_text, (int) strlen (p_error_text));
    }

    /* Go back and put the parameter length into the buffer */
    rsp_param_len = p_rsp - p_rsp_param_len - 2;
    UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len);

    /* Set the length of the SDP data in the buffer */
    p_buf->len = p_rsp - p_rsp_start;


    /* Send the buffer through L2CAP */
    L2CA_DataWrite (p_ccb->connection_id, p_buf);
}



/*******************************************************************************
**
** Function         sdpu_extract_uid_seq
**
** Description      This function extracts a UUID sequence from the passed input
**                  buffer, and puts it into the passed output list.
**
** Returns          Pointer to next byte in the input buffer after the sequence.
**
*******************************************************************************/
UINT8 *sdpu_extract_uid_seq (UINT8 *p, UINT16 param_len, tSDP_UUID_SEQ *p_seq)
{
    UINT8   *p_seq_end;
    UINT8   descr, type, size;
    UINT32  seq_len, uuid_len;

    /* Assume none found */
    p_seq->num_uids = 0;

    /* A UID sequence is composed of a bunch of UIDs. */

    BE_STREAM_TO_UINT8 (descr, p);
    type = descr >> 3;
    size = descr & 7;

    if (type != DATA_ELE_SEQ_DESC_TYPE) {
        return (NULL);
    }

    switch (size) {
    case SIZE_TWO_BYTES:
        seq_len = 2;
        break;
    case SIZE_FOUR_BYTES:
        seq_len = 4;
        break;
    case SIZE_SIXTEEN_BYTES:
        seq_len = 16;
        break;
    case SIZE_IN_NEXT_BYTE:
        BE_STREAM_TO_UINT8 (seq_len, p);
        break;
    case SIZE_IN_NEXT_WORD:
        BE_STREAM_TO_UINT16 (seq_len, p);
        break;
    case SIZE_IN_NEXT_LONG:
        BE_STREAM_TO_UINT32 (seq_len, p);
        break;
    default:
        return (NULL);
    }

    if (seq_len >= param_len) {
        return (NULL);
    }

    p_seq_end = p + seq_len;

    /* Loop through, extracting the UIDs */
    for ( ; p < p_seq_end ; ) {
        BE_STREAM_TO_UINT8 (descr, p);
        type = descr >> 3;
        size = descr & 7;

        if (type != UUID_DESC_TYPE) {
            return (NULL);
        }

        switch (size) {
        case SIZE_TWO_BYTES:
            uuid_len = 2;
            break;
        case SIZE_FOUR_BYTES:
            uuid_len = 4;
            break;
        case SIZE_SIXTEEN_BYTES:
            uuid_len = 16;
            break;
        case SIZE_IN_NEXT_BYTE:
            BE_STREAM_TO_UINT8 (uuid_len, p);
            break;
        case SIZE_IN_NEXT_WORD:
            BE_STREAM_TO_UINT16 (uuid_len, p);
            break;
        case SIZE_IN_NEXT_LONG:
            BE_STREAM_TO_UINT32 (uuid_len, p);
            break;
        default:
            return (NULL);
        }

        /* If UUID length is valid, copy it across */
        if ((uuid_len == 2) || (uuid_len == 4) || (uuid_len == 16)) {
            p_seq->uuid_entry[p_seq->num_uids].len = (UINT16) uuid_len;
            BE_STREAM_TO_ARRAY (p, p_seq->uuid_entry[p_seq->num_uids].value, (int)uuid_len);
            p_seq->num_uids++;
        } else {
            return (NULL);
        }

        /* We can only do so many */
        if (p_seq->num_uids >= MAX_UUIDS_PER_SEQ) {
            return (NULL);
        }
    }

    if (p != p_seq_end) {
        return (NULL);
    }

    return (p);
}



/*******************************************************************************
**
** Function         sdpu_extract_attr_seq
**
** Description      This function extracts an attribute sequence from the passed
**                  input buffer, and puts it into the passed output list.
**
** Returns          Pointer to next byte in the input buffer after the sequence.
**
*******************************************************************************/
UINT8 *sdpu_extract_attr_seq (UINT8 *p, UINT16 param_len, tSDP_ATTR_SEQ *p_seq)
{
    UINT8   *p_end_list;
    UINT8   descr, type, size;
    UINT32  list_len, attr_len;

    /* Assume none found */
    p_seq->num_attr = 0;

    /* Get attribute sequence info */
    BE_STREAM_TO_UINT8 (descr, p);
    type = descr >> 3;
    size = descr & 7;

    if (type != DATA_ELE_SEQ_DESC_TYPE) {
        return (p);
    }

    switch (size) {
    case SIZE_IN_NEXT_BYTE:
        BE_STREAM_TO_UINT8 (list_len, p);
        break;

    case SIZE_IN_NEXT_WORD:
        BE_STREAM_TO_UINT16 (list_len, p);
        break;

    case SIZE_IN_NEXT_LONG:
        BE_STREAM_TO_UINT32 (list_len, p);
        break;

    default:
        return (p);
    }

    if (list_len > param_len) {
        return (p);
    }

    p_end_list = p + list_len;

    /* Loop through, extracting the attribute IDs */
    for ( ; p < p_end_list ; ) {
        BE_STREAM_TO_UINT8 (descr, p);
        type = descr >> 3;
        size = descr & 7;

        if (type != UINT_DESC_TYPE) {
            return (p);
        }

        switch (size) {
        case SIZE_TWO_BYTES:
            attr_len = 2;
            break;
        case SIZE_FOUR_BYTES:
            attr_len = 4;
            break;
        case SIZE_IN_NEXT_BYTE:
            BE_STREAM_TO_UINT8 (attr_len, p);
            break;
        case SIZE_IN_NEXT_WORD:
            BE_STREAM_TO_UINT16 (attr_len, p);
            break;
        case SIZE_IN_NEXT_LONG:
            BE_STREAM_TO_UINT32 (attr_len, p);
            break;
        default:
            return (NULL);
            break;
        }

        /* Attribute length must be 2-bytes or 4-bytes for a paired entry. */
        if (attr_len == 2) {
            BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].start, p);
            p_seq->attr_entry[p_seq->num_attr].end = p_seq->attr_entry[p_seq->num_attr].start;
        } else if (attr_len == 4) {
            BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].start, p);
            BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].end, p);
        } else {
            return (NULL);
        }

        /* We can only do so many */
        if (++p_seq->num_attr >= MAX_ATTR_PER_SEQ) {
            return (NULL);
        }
    }

    return (p);
}


/*******************************************************************************
**
** Function         sdpu_get_len_from_type
**
** Description      This function gets the length
**
** Returns          void
**
*******************************************************************************/
UINT8 *sdpu_get_len_from_type (UINT8 *p, UINT8 type, UINT32 *p_len)
{
    UINT8   u8;
    UINT16  u16;
    UINT32  u32;

    switch (type & 7) {
    case SIZE_ONE_BYTE:
        *p_len = 1;
        break;
    case SIZE_TWO_BYTES:
        *p_len = 2;
        break;
    case SIZE_FOUR_BYTES:
        *p_len = 4;
        break;
    case SIZE_EIGHT_BYTES:
        *p_len = 8;
        break;
    case SIZE_SIXTEEN_BYTES:
        *p_len = 16;
        break;
    case SIZE_IN_NEXT_BYTE:
        BE_STREAM_TO_UINT8 (u8, p);
        *p_len = u8;
        break;
    case SIZE_IN_NEXT_WORD:
        BE_STREAM_TO_UINT16 (u16, p);
        *p_len = u16;
        break;
    case SIZE_IN_NEXT_LONG:
        BE_STREAM_TO_UINT32 (u32, p);
        *p_len = (UINT16) u32;
        break;
    }

    return (p);
}


/*******************************************************************************
**
** Function         sdpu_is_base_uuid
**
** Description      This function checks a 128-bit UUID with the base to see if
**                  it matches. Only the last 12 bytes are compared.
**
** Returns          TRUE if matched, else FALSE
**
*******************************************************************************/
BOOLEAN sdpu_is_base_uuid (UINT8 *p_uuid)
{
    UINT16    xx;

    for (xx = 4; xx < MAX_UUID_SIZE; xx++)
        if (p_uuid[xx] != sdp_base_uuid[xx]) {
            return (FALSE);
        }

    /* If here, matched */
    return (TRUE);
}


/*******************************************************************************
**
** Function         sdpu_compare_uuid_arrays
**
** Description      This function compares 2 BE UUIDs. If needed, they are expanded
**                  to 128-bit UUIDs, then compared.
**
** NOTE             it is assumed that the arrays are in Big Endian format
**
** Returns          TRUE if matched, else FALSE
**
*******************************************************************************/
BOOLEAN sdpu_compare_uuid_arrays (UINT8 *p_uuid1, UINT32 len1, UINT8 *p_uuid2, UINT16 len2)
{
    UINT8       nu1[MAX_UUID_SIZE];
    UINT8       nu2[MAX_UUID_SIZE];

    if ( ((len1 != 2) && (len1 != 4) && (len1 != 16)) ||
            ((len2 != 2) && (len2 != 4) && (len2 != 16)) ) {
        SDP_TRACE_ERROR("%s: invalid length\n", __func__);
        return FALSE;
    }

    /* If lengths match, do a straight compare */
    if (len1 == len2) {
        if (len1 == 2) {
            return ((p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1]));
        }
        if (len1 == 4) {
            return (  (p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1])
                      && (p_uuid1[2] == p_uuid2[2]) && (p_uuid1[3] == p_uuid2[3]) );
        } else {
            return (memcmp (p_uuid1, p_uuid2, (size_t)len1) == 0);
        }
    } else if (len1 > len2) {
        /* If the len1 was 4-byte, (so len2 is 2-byte), compare on the fly */
        if (len1 == 4) {
            return ( (p_uuid1[0] == 0) && (p_uuid1[1] == 0)
                     && (p_uuid1[2] == p_uuid2[0]) && (p_uuid1[3] == p_uuid2[1]) );
        } else {
            /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */
            memcpy (nu1, p_uuid1,       MAX_UUID_SIZE);
            memcpy (nu2, sdp_base_uuid, MAX_UUID_SIZE);

            if (len2 == 4) {
                memcpy (nu2, p_uuid2, len2);
            } else if (len2 == 2) {
                memcpy (nu2 + 2, p_uuid2, len2);
            }

            return (memcmp (nu1, nu2, MAX_UUID_SIZE) == 0);
        }
    } else {
        /* len2 is greater than len1 */
        /* If the len2 was 4-byte, (so len1 is 2-byte), compare on the fly */
        if (len2 == 4) {
            return ( (p_uuid2[0] == 0) && (p_uuid2[1] == 0)
                     && (p_uuid2[2] == p_uuid1[0]) && (p_uuid2[3] == p_uuid1[1]) );
        } else {
            /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */
            memcpy (nu2, p_uuid2,       MAX_UUID_SIZE);
            memcpy (nu1, sdp_base_uuid, MAX_UUID_SIZE);

            if (len1 == 4) {
                memcpy (nu1, p_uuid1, (size_t)len1);
            } else if (len1 == 2) {
                memcpy (nu1 + 2, p_uuid1, (size_t)len1);
            }

            return (memcmp (nu1, nu2, MAX_UUID_SIZE) == 0);
        }
    }
}


/*******************************************************************************
**
** Function         sdpu_compare_bt_uuids
**
** Description      This function compares 2 BT UUID structures.
**
** NOTE             it is assumed that BT UUID structures are compressed to the
**                  smallest possible UUIDs (by removing the base SDP UUID)
**
** Returns          TRUE if matched, else FALSE
**
*******************************************************************************/
BOOLEAN sdpu_compare_bt_uuids (tBT_UUID *p_uuid1, tBT_UUID *p_uuid2)
{
    /* Lengths must match for BT UUIDs to match */
    if (p_uuid1->len == p_uuid2->len) {
        if (p_uuid1->len == 2) {
            return (p_uuid1->uu.uuid16 == p_uuid2->uu.uuid16);
        } else if (p_uuid1->len == 4) {
            return (p_uuid1->uu.uuid32 == p_uuid2->uu.uuid32);
        } else if (!memcmp (p_uuid1->uu.uuid128, p_uuid2->uu.uuid128, 16)) {
            return (TRUE);
        }
    }

    return (FALSE);
}


/*******************************************************************************
**
** Function         sdpu_compare_uuid_with_attr
**
** Description      This function compares a BT UUID structure with the UUID in an
**                  SDP attribute record. If needed, they are expanded to 128-bit
**                  UUIDs, then compared.
**
** NOTE           - it is assumed that BT UUID structures are compressed to the
**                  smallest possible UUIDs (by removing the base SDP UUID).
**                - it is also assumed that the discovery atribute is compressed
**                  to the smallest possible
**
** Returns          TRUE if matched, else FALSE
**
*******************************************************************************/
BOOLEAN sdpu_compare_uuid_with_attr (tBT_UUID *p_btuuid, tSDP_DISC_ATTR *p_attr)
{
    UINT16      attr_len = SDP_DISC_ATTR_LEN (p_attr->attr_len_type);

    /* Since both UUIDs are compressed, lengths must match  */
    if (p_btuuid->len != attr_len) {
        return (FALSE);
    }

    if (p_btuuid->len == 2) {
        return (BOOLEAN)(p_btuuid->uu.uuid16 == p_attr->attr_value.v.u16);
    } else if (p_btuuid->len == 4) {
        return (BOOLEAN)(p_btuuid->uu.uuid32 == p_attr->attr_value.v.u32);
    }
    /* coverity[overrun-buffer-arg] */
    /*
       Event overrun-buffer-arg: Overrun of static array "&p_attr->attr_value.v.array" of size 4 bytes by passing it to a function which indexes it with argument "16U" at byte position 15
       FALSE-POSITIVE error from Coverity test tool. Please do NOT remove following comment.
       False-positive: SDP uses scratch buffer to hold the attribute value.
       The actual size of tSDP_DISC_ATVAL does not matter.
       If the array size in tSDP_DISC_ATVAL is increase, we would increase the system RAM usage unnecessarily
    */
    else if (!memcmp (p_btuuid->uu.uuid128, (void *) p_attr->attr_value.v.array, MAX_UUID_SIZE)) {
        return (TRUE);
    }

    return (FALSE);
}

/*******************************************************************************
**
** Function         sdpu_sort_attr_list
**
** Description      sorts a list of attributes in numeric order from lowest to
**                  highest to conform to SDP specification
**
** Returns          void
**
*******************************************************************************/
void sdpu_sort_attr_list( UINT16 num_attr, tSDP_DISCOVERY_DB *p_db )
{
    UINT16 i;
    UINT16 x;

    /* Done if no attributes to sort */
    if (num_attr <= 1) {
        return;
    } else if (num_attr > SDP_MAX_ATTR_FILTERS) {
        num_attr = SDP_MAX_ATTR_FILTERS;
    }

    num_attr--; /* for the for-loop */
    for ( i = 0; i < num_attr; ) {
        if ( p_db->attr_filters[i] > p_db->attr_filters[i + 1] ) {
            /* swap the attribute IDs and start from the beginning */
            x = p_db->attr_filters[i];
            p_db->attr_filters[i] = p_db->attr_filters[i + 1];
            p_db->attr_filters[i + 1] = x;

            i = 0;
        } else {
            i++;
        }
    }
}


/*******************************************************************************
**
** Function         sdpu_get_list_len
**
** Description      gets the total list length in the sdp database for a given
**                  uid sequence and attr sequence
**
** Returns          void
**
*******************************************************************************/
UINT16 sdpu_get_list_len(tSDP_UUID_SEQ *uid_seq, tSDP_ATTR_SEQ *attr_seq)
{
    tSDP_RECORD    *p_rec;
    UINT16 len = 0;
    UINT16 len1;

    for (p_rec = sdp_db_service_search (NULL, uid_seq); p_rec; p_rec = sdp_db_service_search (p_rec, uid_seq)) {
        len += 3;

        len1 = sdpu_get_attrib_seq_len(p_rec, attr_seq );

        if (len1 != 0) {
            len += len1;
        } else {
            len -= 3;
        }
    }
    return len;
}

/*******************************************************************************
**
** Function         sdpu_get_attrib_seq_len
**
** Description      gets the length of the specific attributes in a given
**                  sdp record
**
** Returns          void
**
*******************************************************************************/
UINT16 sdpu_get_attrib_seq_len(tSDP_RECORD *p_rec, tSDP_ATTR_SEQ *attr_seq)
{
    tSDP_ATTRIBUTE *p_attr;
    UINT16 len1 = 0;
    UINT16 xx;
    BOOLEAN is_range = FALSE;
    UINT16 start_id = 0, end_id = 0;

    for (xx = 0; xx < attr_seq->num_attr; xx++) {
        if (is_range == FALSE) {
            start_id = attr_seq->attr_entry[xx].start;
            end_id = attr_seq->attr_entry[xx].end;
        }
        p_attr = sdp_db_find_attr_in_rec (p_rec,
                                          start_id,
                                          end_id);
        if (p_attr) {
            len1 += sdpu_get_attrib_entry_len (p_attr);

            /* If doing a range, stick with this one till no more attributes found */
            if (start_id != end_id) {
                /* Update for next time through */
                start_id = p_attr->id + 1;
                xx--;
                is_range = TRUE;
            } else {
                is_range = FALSE;
            }
        } else {
            is_range = FALSE;
        }
    }
    return len1;
}

/*******************************************************************************
**
** Function         sdpu_get_attrib_entry_len
**
** Description      gets the length of a specific attribute
**
** Returns          void
**
*******************************************************************************/
UINT16 sdpu_get_attrib_entry_len(tSDP_ATTRIBUTE *p_attr)
{
    UINT16 len = 3;

    /* the attribute is in the db record.
     * assuming the attribute len is less than SDP_MAX_ATTR_LEN */
    switch (p_attr->type) {
    case TEXT_STR_DESC_TYPE:    /* 4 */
    case DATA_ELE_SEQ_DESC_TYPE:/* 6 */
    case DATA_ELE_ALT_DESC_TYPE:/* 7 */
    case URL_DESC_TYPE:         /* 8 */
#if (SDP_MAX_ATTR_LEN > 0xFFFF)
        if (p_attr->len > 0xFFFF) {
            len += 5;
        } else

#endif/* 0xFFFF - 0xFF */
        {
#if (SDP_MAX_ATTR_LEN > 0xFF)
            if (p_attr->len > 0xFF) {
                len += 3;
            } else

#endif /* 0xFF and less*/
            {
                len += 2;
            }
        }
        len += p_attr->len;
        return len;
    }

    /* Now, the attribute value */
    switch (p_attr->len) {
    case 1:
    case 2:
    case 4:
    case 8:
    case 16:
        len += 1;
        break;
    default:
        len += 2;
        break;
    }

    len += p_attr->len;
    return len;
}


/*******************************************************************************
**
** Function         sdpu_build_partial_attrib_entry
**
** Description      This function fills a buffer with partial attribute. It is
**                  assumed that the maximum size of any attribute is 256 bytes.
**
**                  p_out: output buffer
**                  p_attr: attribute to be copied partially into p_out
**                  rem_len: num bytes to copy into p_out
**                  offset: current start offset within the attr that needs to be copied
**
** Returns          Pointer to next byte in the output buffer.
**                  offset is also updated
**
*******************************************************************************/
UINT8 *sdpu_build_partial_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr, UINT16 len, UINT16 *offset)
{
    UINT8   *p_attr_buff;
    UINT8   *p_tmp_attr;
    size_t  len_to_copy;
    UINT16  attr_len;

    if ((p_attr_buff = (UINT8 *) osi_malloc(sizeof(UINT8) * SDP_MAX_ATTR_LEN )) == NULL) {
        SDP_TRACE_ERROR("sdpu_build_partial_attrib_entry cannot get a buffer!\n");
        return NULL;
    }
    p_tmp_attr = p_attr_buff;

    sdpu_build_attrib_entry(p_tmp_attr, p_attr);
    attr_len = sdpu_get_attrib_entry_len(p_attr);

    len_to_copy = ((attr_len - *offset) < len) ? (attr_len - *offset) : len;

    memcpy(p_out, &p_attr_buff[*offset], len_to_copy);

    p_out = &p_out[len_to_copy];
    *offset += len_to_copy;

    osi_free(p_attr_buff);
    return p_out;
}

/*******************************************************************************
**
** Function         sdpu_uuid16_to_uuid128
**
** Description      This function converts UUID-16 to UUID-128 by including the base UUID
**
**                  uuid16: 2-byte UUID
**                  p_uuid128: Expanded 128-bit UUID
**
** Returns          None
**
*******************************************************************************/

void sdpu_uuid16_to_uuid128(UINT16 uuid16, UINT8 *p_uuid128)
{
    UINT16 uuid16_bo;
    memset(p_uuid128, 0, 16);

    memcpy(p_uuid128, sdp_base_uuid, MAX_UUID_SIZE);
    uuid16_bo = ntohs(uuid16);
    memcpy(p_uuid128 + 2, &uuid16_bo, sizeof(uint16_t));
}

#endif  ///SDP_INCLUDED == TRUE