alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
51d811a71c
esp-idf/components/driver/ledc.c

789 lines
34 KiB
C
Raw Normal View History

add ledc driver code
2016-09-22 21:21:37 -04:00
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <esp_types.h>
esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-03-29 23:39:42 -04:00
#include <string.h>
add ledc driver code
2016-09-22 21:21:37 -04:00
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/xtensa_api.h"
all: Using xxx_periph.h Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... . Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-05-13 06:02:45 -04:00
#include "soc/gpio_periph.h"
add ledc driver code
2016-09-22 21:21:37 -04:00
#include "driver/ledc.h"
all: Using xxx_periph.h Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... . Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-05-13 06:02:45 -04:00
#include "soc/ledc_periph.h"
Update UART driver 1. Use esp_log API for LEDC and GPIO code. 2. Modify some API return value. 3. Add ledc_set_pin() for LEDC 4. Modify typo in uart.h Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 03:57:23 -04:00
#include "esp_log.h"
add ledc driver code
2016-09-22 21:21:37 -04:00
drivers: remove file paths from log statements Function name and error string are usually sufficient to find the place which has triggered an error. __FILE__ macro generates a string which has absolute file name (with our build system), so there is a lot of long strings present in the program because of that. Fixes https://github.com/espressif/esp-idf/issues/126
2016-12-06 23:01:30 -05:00
static const char* LEDC_TAG = "ledc";
add ledc driver code
2016-09-22 21:21:37 -04:00
static portMUX_TYPE ledc_spinlock = portMUX_INITIALIZER_UNLOCKED;
drivers: remove file paths from log statements Function name and error string are usually sufficient to find the place which has triggered an error. __FILE__ macro generates a string which has absolute file name (with our build system), so there is a lot of long strings present in the program because of that. Fixes https://github.com/espressif/esp-idf/issues/126
2016-12-06 23:01:30 -05:00
#define LEDC_CHECK(a, str, ret_val) \
if (!(a)) { \
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
ESP_LOGE(LEDC_TAG, "%s(%d): %s", __FUNCTION__, __LINE__, str); \
drivers: remove file paths from log statements Function name and error string are usually sufficient to find the place which has triggered an error. __FILE__ macro generates a string which has absolute file name (with our build system), so there is a lot of long strings present in the program because of that. Fixes https://github.com/espressif/esp-idf/issues/126
2016-12-06 23:01:30 -05:00
return (ret_val); \
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
#define LEDC_ARG_CHECK(a, param) LEDC_CHECK(a, param " argument is invalid", ESP_ERR_INVALID_ARG)
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
typedef struct {
uint16_t speed_mode;
uint16_t direction;
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
2017-05-11 22:43:37 -04:00
uint32_t target_duty;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
int cycle_num;
int scale;
ledc_fade_mode_t mode;
xSemaphoreHandle ledc_fade_sem;
xSemaphoreHandle ledc_fade_mux;
esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-03-29 23:39:42 -04:00
#if CONFIG_SPIRAM_USE_MALLOC
StaticQueue_t ledc_fade_sem_storage;
#endif
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
} ledc_fade_t;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
static ledc_fade_t *s_ledc_fade_rec[LEDC_SPEED_MODE_MAX][LEDC_CHANNEL_MAX];
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
static ledc_isr_handle_t s_ledc_fade_isr_handle = NULL;
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
#define LEDC_VAL_NO_CHANGE (-1)
#define LEDC_STEP_NUM_MAX (1023)
#define LEDC_DUTY_DECIMAL_BIT_NUM (4)
#define LEDC_HPOINT_VAL_MAX (LEDC_HPOINT_HSCH1_V)
#define LEDC_FADE_TOO_SLOW_STR "LEDC FADE TOO SLOW"
#define LEDC_FADE_TOO_FAST_STR "LEDC FADE TOO FAST"
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
static const char *LEDC_FADE_SERVICE_ERR_STR = "LEDC fade service not installed";
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
static const char *LEDC_FADE_INIT_ERROR_STR = "LEDC fade channel init error, not enough memory or service not installed";
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
static void ledc_ls_timer_update(ledc_mode_t speed_mode, ledc_timer_t timer_sel)
{
if (speed_mode == LEDC_LOW_SPEED_MODE) {
LEDC.timer_group[speed_mode].timer[timer_sel].conf.low_speed_update = 1;
}
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
static IRAM_ATTR void ledc_ls_channel_update(ledc_mode_t speed_mode, ledc_channel_t channel_num)
{
if (speed_mode == LEDC_LOW_SPEED_MODE) {
LEDC.channel_group[speed_mode].channel[channel_num].conf0.low_speed_update = 1;
}
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
static esp_err_t ledc_enable_intr_type(ledc_mode_t speed_mode, uint32_t channel, ledc_intr_type_t type)
{
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
uint32_t value;
uint32_t intr_type = type;
portENTER_CRITICAL(&ledc_spinlock);
value = LEDC.int_ena.val;
uint8_t int_en_base = LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_S;
if (speed_mode == LEDC_LOW_SPEED_MODE) {
int_en_base = LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S;
}
if (intr_type == LEDC_INTR_FADE_END) {
LEDC.int_ena.val = value | BIT(int_en_base + channel);
} else {
LEDC.int_ena.val = (value & (~(BIT(int_en_base + channel))));
}
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
static void _ledc_fade_hw_acquire(ledc_mode_t mode, ledc_channel_t channel)
{
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
if (fade) {
xSemaphoreTake(fade->ledc_fade_sem, portMAX_DELAY);
ledc_enable_intr_type(mode, channel, LEDC_INTR_DISABLE);
}
}
static void _ledc_fade_hw_release(ledc_mode_t mode, ledc_channel_t channel)
{
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
if (fade) {
xSemaphoreGive(fade->ledc_fade_sem);
}
}
static void _ledc_op_lock_acquire(ledc_mode_t mode, ledc_channel_t channel)
{
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
if (fade) {
xSemaphoreTake(fade->ledc_fade_mux, portMAX_DELAY);
}
}
static void _ledc_op_lock_release(ledc_mode_t mode, ledc_channel_t channel)
{
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
if (fade) {
xSemaphoreGive(fade->ledc_fade_mux);
}
}
static int ledc_get_max_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
{
// The arguments are checked before internally calling this function.
int timer_sel = LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel;
int max_duty = (1 << (LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution));
return max_duty;
}
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
esp_err_t ledc_timer_set(ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t clock_divider, uint32_t duty_resolution,
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_clk_src_t clk_src)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
LEDC.timer_group[speed_mode].timer[timer_sel].conf.clock_divider = clock_divider;
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.timer_group[speed_mode].timer[timer_sel].conf.tick_sel = clk_src;
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution = duty_resolution;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_timer_update(speed_mode, timer_sel);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
static IRAM_ATTR esp_err_t ledc_duty_config(ledc_mode_t speed_mode, ledc_channel_t channel_num, int hpoint_val, int duty_val,
add ledc driver code
2016-09-22 21:21:37 -04:00
uint32_t duty_direction, uint32_t duty_num, uint32_t duty_cycle, uint32_t duty_scale)
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
{
portENTER_CRITICAL(&ledc_spinlock);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (hpoint_val >= 0) {
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC.channel_group[speed_mode].channel[channel_num].hpoint.hpoint = hpoint_val & LEDC_HPOINT_HSCH1_V;
}
if (duty_val >= 0) {
LEDC.channel_group[speed_mode].channel[channel_num].duty.duty = duty_val;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.channel_group[speed_mode].channel[channel_num].conf1.val = ((duty_direction & LEDC_DUTY_INC_HSCH0_V) << LEDC_DUTY_INC_HSCH0_S) |
((duty_num & LEDC_DUTY_NUM_HSCH0_V) << LEDC_DUTY_NUM_HSCH0_S) |
((duty_cycle & LEDC_DUTY_CYCLE_HSCH0_V) << LEDC_DUTY_CYCLE_HSCH0_S) |
((duty_scale & LEDC_DUTY_SCALE_HSCH0_V) << LEDC_DUTY_SCALE_HSCH0_S);
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_channel_update(speed_mode, channel_num);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
LEDC driver: Use ledc_channel_t for all channel arguments Closes github #54: https://github.com/espressif/esp-idf/issues/54
2016-12-21 21:30:24 -05:00
esp_err_t ledc_bind_channel_timer(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t timer_idx)
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_idx < LEDC_TIMER_MAX, "timer_select"); portENTER_CRITICAL(&ledc_spinlock);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel = timer_idx;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_channel_update(speed_mode, channel);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
esp_err_t ledc_timer_rst(ledc_mode_t speed_mode, uint32_t timer_sel)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 1;
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 0;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_timer_update(speed_mode, timer_sel);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
esp_err_t ledc_timer_pause(ledc_mode_t speed_mode, uint32_t timer_sel)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 1;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_timer_update(speed_mode, timer_sel);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
esp_err_t ledc_timer_resume(ledc_mode_t speed_mode, uint32_t timer_sel)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 0;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_timer_update(speed_mode, timer_sel);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
Add disabling/enabling of shared interrupt, add testcase for interrupts
2016-12-07 08:30:21 -05:00
esp_err_t ledc_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, ledc_isr_handle_t *handle)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts to be marked specifically as having a handler that's all in IRAM.
2016-11-25 04:33:51 -05:00
esp_err_t ret;
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(fn, "fn");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
ret = esp_intr_alloc(ETS_LEDC_INTR_SOURCE, intr_alloc_flags, fn, arg, handle);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts to be marked specifically as having a handler that's all in IRAM.
2016-11-25 04:33:51 -05:00
return ret;
add ledc driver code
2016-09-22 21:21:37 -04:00
}
components/driver: 'const' all config calls. Some were, some weren't. They all could/should be. Signed-off-by: Michel Pollet <buserror@gmail.com>
2017-04-13 13:33:33 -04:00
esp_err_t ledc_timer_config(const ledc_timer_config_t* timer_conf)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_conf != NULL, "timer_conf");
uint32_t freq_hz = timer_conf->freq_hz;
uint32_t duty_resolution = timer_conf->duty_resolution;
uint32_t timer_num = timer_conf->timer_num;
uint32_t speed_mode = timer_conf->speed_mode;
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
periph_module_enable(PERIPH_LEDC_MODULE);
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
if (freq_hz == 0 || duty_resolution == 0 || duty_resolution >= LEDC_TIMER_BIT_MAX) {
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
ESP_LOGE(LEDC_TAG, "freq_hz=%u duty_resolution=%u", freq_hz, duty_resolution);
add ledc driver code
2016-09-22 21:21:37 -04:00
return ESP_ERR_INVALID_ARG;
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (timer_num > LEDC_TIMER_3) {
ledc: fix reported error when div_param == 256 Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error. In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value). Changed the if statements a bit to make the logic clearer, and added more descriptive error messages. Also added missing error for the unimplemented case of low speed mode.
2016-11-23 23:27:32 -05:00
ESP_LOGE(LEDC_TAG, "invalid timer #%u", timer_num);
add ledc driver code
2016-09-22 21:21:37 -04:00
return ESP_ERR_INVALID_ARG;
}
esp_err_t ret = ESP_OK;
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
uint32_t precision = ( 0x1 << duty_resolution ); // 2**depth
ledc: fix reported error when div_param == 256 Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error. In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value). Changed the if statements a bit to make the logic clearer, and added more descriptive error messages. Also added missing error for the unimplemented case of low speed mode.
2016-11-23 23:27:32 -05:00
// Try calculating divisor based on LEDC_APB_CLK
ledc_clk_src_t timer_clk_src = LEDC_APB_CLK;
// div_param is a Q10.8 fixed point value
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
uint64_t div_param = ( (uint64_t) LEDC_APB_CLK_HZ << 8 ) / freq_hz / precision;
ledc: fix reported error when div_param == 256 Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error. In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value). Changed the if statements a bit to make the logic clearer, and added more descriptive error messages. Also added missing error for the unimplemented case of low speed mode.
2016-11-23 23:27:32 -05:00
if (div_param < 256) {
// divisor is too low
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
ESP_LOGE(LEDC_TAG, "requested frequency and duty resolution can not be achieved, try reducing freq_hz or duty_resolution. div_param=%d",
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
(uint32_t ) div_param);
ledc: fix reported error when div_param == 256 Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error. In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value). Changed the if statements a bit to make the logic clearer, and added more descriptive error messages. Also added missing error for the unimplemented case of low speed mode.
2016-11-23 23:27:32 -05:00
ret = ESP_FAIL;
}
if (div_param > LEDC_DIV_NUM_HSTIMER0_V) {
// APB_CLK results in divisor which too high. Try using REF_TICK as clock source.
timer_clk_src = LEDC_REF_TICK;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
div_param = ((uint64_t) LEDC_REF_CLK_HZ << 8) / freq_hz / precision;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (div_param < 256 || div_param > LEDC_DIV_NUM_HSTIMER0_V) {
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
ESP_LOGE(LEDC_TAG, "requested frequency and duty resolution can not be achieved, try increasing freq_hz or duty_resolution. div_param=%d",
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
(uint32_t ) div_param);
add ledc driver code
2016-09-22 21:21:37 -04:00
ret = ESP_FAIL;
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
} else {
if (speed_mode == LEDC_LOW_SPEED_MODE) {
//for now, we only select 80mhz for slow clk of LEDC low speed channels.
LEDC.conf.slow_clk_sel = 1;
}
add ledc driver code
2016-09-22 21:21:37 -04:00
}
ledc: fix reported error when div_param == 256 Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error. In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value). Changed the if statements a bit to make the logic clearer, and added more descriptive error messages. Also added missing error for the unimplemented case of low speed mode.
2016-11-23 23:27:32 -05:00
// set timer parameters
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
ledc_timer_set(speed_mode, timer_num, div_param, duty_resolution, timer_clk_src);
ledc: fix reported error when div_param == 256 Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error. In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value). Changed the if statements a bit to make the logic clearer, and added more descriptive error messages. Also added missing error for the unimplemented case of low speed mode.
2016-11-23 23:27:32 -05:00
// reset timer
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
ledc_timer_rst(speed_mode, timer_num);
return ret;
}
Update UART driver 1. Use esp_log API for LEDC and GPIO code. 2. Modify some API return value. 3. Add ledc_set_pin() for LEDC 4. Modify typo in uart.h Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 03:57:23 -04:00
esp_err_t ledc_set_pin(int gpio_num, ledc_mode_t speed_mode, ledc_channel_t ledc_channel)
{
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(ledc_channel < LEDC_CHANNEL_MAX, "ledc_channel");
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "gpio_num");
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
Update UART driver 1. Use esp_log API for LEDC and GPIO code. 2. Modify some API return value. 3. Add ledc_set_pin() for LEDC 4. Modify typo in uart.h Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 03:57:23 -04:00
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], PIN_FUNC_GPIO);
gpio_set_direction(gpio_num, GPIO_MODE_OUTPUT);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (speed_mode == LEDC_HIGH_SPEED_MODE) {
Update UART driver 1. Use esp_log API for LEDC and GPIO code. 2. Modify some API return value. 3. Add ledc_set_pin() for LEDC 4. Modify typo in uart.h Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 03:57:23 -04:00
gpio_matrix_out(gpio_num, LEDC_HS_SIG_OUT0_IDX + ledc_channel, 0, 0);
} else {
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
gpio_matrix_out(gpio_num, LEDC_LS_SIG_OUT0_IDX + ledc_channel, 0, 0);
Update UART driver 1. Use esp_log API for LEDC and GPIO code. 2. Modify some API return value. 3. Add ledc_set_pin() for LEDC 4. Modify typo in uart.h Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 03:57:23 -04:00
}
return ESP_OK;
}
components/driver: 'const' all config calls. Some were, some weren't. They all could/should be. Signed-off-by: Michel Pollet <buserror@gmail.com>
2017-04-13 13:33:33 -04:00
esp_err_t ledc_channel_config(const ledc_channel_config_t* ledc_conf)
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
{
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(ledc_conf, "ledc_conf");
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
uint32_t speed_mode = ledc_conf->speed_mode;
uint32_t gpio_num = ledc_conf->gpio_num;
uint32_t ledc_channel = ledc_conf->channel;
uint32_t timer_select = ledc_conf->timer_sel;
uint32_t intr_type = ledc_conf->intr_type;
uint32_t duty = ledc_conf->duty;
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
uint32_t hpoint = ledc_conf->hpoint;
LEDC_ARG_CHECK(ledc_channel < LEDC_CHANNEL_MAX, "ledc_channel");
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "gpio_num");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(timer_select < LEDC_TIMER_MAX, "timer_select");
driver: PCNT minor changes
2016-11-23 05:10:45 -05:00
periph_module_enable(PERIPH_LEDC_MODULE);
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
esp_err_t ret = ESP_OK;
/*set channel parameters*/
/* channel parameters decide how the waveform looks like in one period*/
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
/* set channel duty and hpoint value, duty range is (0 ~ ((2 ** duty_resolution) - 1)), max hpoint value is 0xfffff*/
ledc_set_duty_with_hpoint(speed_mode, ledc_channel, duty, hpoint);
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
/*update duty settings*/
ledc_update_duty(speed_mode, ledc_channel);
/*bind the channel with the timer*/
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
ledc_bind_channel_timer(speed_mode, ledc_channel, timer_select);
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
/*set interrupt type*/
add ledc driver code
2016-09-22 21:21:37 -04:00
ledc_enable_intr_type(speed_mode, ledc_channel, intr_type);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
ESP_LOGD(LEDC_TAG, "LEDC_PWM CHANNEL %1u|GPIO %02u|Duty %04u|Time %01u",
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
ledc_channel, gpio_num, duty, timer_select
add ledc driver code
2016-09-22 21:21:37 -04:00
);
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
/*set LEDC signal in gpio matrix*/
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], PIN_FUNC_GPIO);
gpio_set_direction(gpio_num, GPIO_MODE_OUTPUT);
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
if (speed_mode == LEDC_HIGH_SPEED_MODE) {
gpio_matrix_out(gpio_num, LEDC_HS_SIG_OUT0_IDX + ledc_channel, 0, 0);
} else {
gpio_matrix_out(gpio_num, LEDC_LS_SIG_OUT0_IDX + ledc_channel, 0, 0);
}
add ledc driver code
2016-09-22 21:21:37 -04:00
return ret;
}
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 11:20:34 -04:00
esp_err_t ledc_update_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.channel_group[speed_mode].channel[channel].conf0.sig_out_en = 1;
LEDC.channel_group[speed_mode].channel[channel].conf1.duty_start = 1;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_channel_update(speed_mode, channel);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
esp_err_t ledc_stop(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t idle_level)
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
LEDC.channel_group[speed_mode].channel[channel].conf0.idle_lv = idle_level & 0x1;
LEDC.channel_group[speed_mode].channel[channel].conf0.sig_out_en = 0;
LEDC.channel_group[speed_mode].channel[channel].conf1.duty_start = 0;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
ledc_ls_channel_update(speed_mode, channel);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ESP_OK;
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
LEDC driver: Use ledc_channel_t for all channel arguments Closes github #54: https://github.com/espressif/esp-idf/issues/54
2016-12-21 21:30:24 -05:00
esp_err_t ledc_set_fade(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, ledc_duty_direction_t fade_direction,
add ledc driver code
2016-09-22 21:21:37 -04:00
uint32_t step_num, uint32_t duty_cyle_num, uint32_t duty_scale)
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
LEDC_ARG_CHECK(fade_direction < LEDC_DUTY_DIR_MAX, "fade_direction");
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(step_num <= LEDC_DUTY_NUM_HSCH0_V, "step_num");
LEDC_ARG_CHECK(duty_cyle_num <= LEDC_DUTY_CYCLE_HSCH0_V, "duty_cycle_num");
LEDC_ARG_CHECK(duty_scale <= LEDC_DUTY_SCALE_HSCH0_V, "duty_scale");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_fade_hw_acquire(speed_mode, channel);
add ledc driver code
2016-09-22 21:21:37 -04:00
ledc_duty_config(speed_mode,
channel, //uint32_t chan_num,
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_VAL_NO_CHANGE,
add ledc driver code
2016-09-22 21:21:37 -04:00
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
fade_direction, //uint32_t increase,
step_num, //uint32_t duty_num,
duty_cyle_num, //uint32_t duty_cycle,
duty_scale //uint32_t duty_scale
);
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_fade_hw_release(speed_mode, channel);
return ESP_OK;
}
esp_err_t ledc_set_duty_with_hpoint(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, uint32_t hpoint)
{
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
LEDC_ARG_CHECK(hpoint <= LEDC_HPOINT_VAL_MAX, "hpoint");
/* The channel configuration should not be changed before the fade operation is done. */
_ledc_fade_hw_acquire(speed_mode, channel);
ledc_duty_config(speed_mode,
channel, //uint32_t chan_num,
hpoint, //uint32_t hpoint_val,
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
1, //uint32_t increase,
1, //uint32_t duty_num,
1, //uint32_t duty_cycle,
0 //uint32_t duty_scale
);
_ledc_fade_hw_release(speed_mode, channel);
add ledc driver code
2016-09-22 21:21:37 -04:00
return ESP_OK;
}
esp_err_t ledc_set_duty(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty)
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
/* The channel configuration should not be changed before the fade operation is done. */
_ledc_fade_hw_acquire(speed_mode, channel);
add ledc driver code
2016-09-22 21:21:37 -04:00
ledc_duty_config(speed_mode,
channel, //uint32_t chan_num,
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_VAL_NO_CHANGE,
add ledc driver code
2016-09-22 21:21:37 -04:00
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
1, //uint32_t increase,
1, //uint32_t duty_num,
1, //uint32_t duty_cycle,
0 //uint32_t duty_scale
);
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_fade_hw_release(speed_mode, channel);
add ledc driver code
2016-09-22 21:21:37 -04:00
return ESP_OK;
}
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
2017-05-11 22:43:37 -04:00
uint32_t ledc_get_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
uint32_t duty = (LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> 4);
add ledc driver code
2016-09-22 21:21:37 -04:00
return duty;
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
int ledc_get_hpoint(ledc_mode_t speed_mode, ledc_channel_t channel)
{
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode argument is invalid", LEDC_ERR_VAL);
LEDC_CHECK(channel < LEDC_CHANNEL_MAX, "channel argument is invalid", LEDC_ERR_VAL);
uint32_t hpoint = LEDC.channel_group[speed_mode].channel[channel].hpoint.hpoint;
return hpoint;
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
esp_err_t ledc_set_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num, uint32_t freq_hz)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
esp_err_t ret = ESP_OK;
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
uint32_t clock_divider = 0;
uint32_t duty_resolution = LEDC.timer_group[speed_mode].timer[timer_num].conf.duty_resolution;
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
uint32_t timer_source_clk = LEDC.timer_group[speed_mode].timer[timer_num].conf.tick_sel;
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
uint32_t precision = (0x1 << duty_resolution);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (timer_source_clk == LEDC_APB_CLK) {
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
clock_divider = ((uint64_t) LEDC_APB_CLK_HZ << 8) / freq_hz / precision;
add ledc driver code
2016-09-22 21:21:37 -04:00
} else {
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
clock_divider = ((uint64_t) LEDC_REF_CLK_HZ << 8) / freq_hz / precision;
add ledc driver code
2016-09-22 21:21:37 -04:00
}
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
if (clock_divider <= 256 || clock_divider > LEDC_DIV_NUM_HSTIMER0) {
ESP_LOGE(LEDC_TAG, "div param err,div_param=%u", clock_divider);
add ledc driver code
2016-09-22 21:21:37 -04:00
ret = ESP_FAIL;
}
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
LEDC.timer_group[speed_mode].timer[timer_num].conf.clock_divider = clock_divider;
bugfix(ledc): fix bugs reported from unit-test and github. 1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082 2. fix ledc_set_freq function for low speed mode.
2018-07-09 13:25:31 -04:00
ledc_ls_timer_update(speed_mode, timer_num);
add ledc driver code
2016-09-22 21:21:37 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
return ret;
}
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
uint32_t ledc_get_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num)
add ledc driver code
2016-09-22 21:21:37 -04:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
add ledc driver code
2016-09-22 21:21:37 -04:00
portENTER_CRITICAL(&ledc_spinlock);
uint32_t freq = 0;
components/driver: modify LEDC driver 1. modify ledc struct header: combine high speed and low speed channel 2. modify ledc init function 3. add timer control api 4. modify typo in ledc.h
2016-09-25 21:56:03 -04:00
uint32_t timer_source_clk = LEDC.timer_group[speed_mode].timer[timer_num].conf.tick_sel;
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
uint32_t duty_resolution = LEDC.timer_group[speed_mode].timer[timer_num].conf.duty_resolution;
uint32_t clock_divider = LEDC.timer_group[speed_mode].timer[timer_num].conf.clock_divider;
uint32_t precision = (0x1 << duty_resolution);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (timer_source_clk == LEDC_APB_CLK) {
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
freq = ((uint64_t) LEDC_APB_CLK_HZ << 8) / precision / clock_divider;
add ledc driver code
2016-09-22 21:21:37 -04:00
} else {
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-10-22 23:32:47 -04:00
freq = ((uint64_t) LEDC_REF_CLK_HZ << 8) / precision / clock_divider;
add ledc driver code
2016-09-22 21:21:37 -04:00
}
portEXIT_CRITICAL(&ledc_spinlock);
return freq;
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
void IRAM_ATTR ledc_fade_isr(void* arg)
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
{
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
int channel;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
portBASE_TYPE HPTaskAwoken = pdFALSE;
uint32_t intr_status = LEDC.int_st.val; //read LEDC interrupt status.
LEDC.int_clr.val = intr_status; //clear LEDC interrupt status.
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
int speed_mode = LEDC_HIGH_SPEED_MODE;
for (channel = 0; channel < LEDC_CHANNEL_MAX; channel++) {
if (intr_status & (BIT(LEDC_DUTY_CHNG_END_HSCH0_INT_ST_S + channel) | BIT(LEDC_DUTY_CHNG_END_LSCH0_INT_ST_S + channel))) {
if (intr_status & BIT(LEDC_DUTY_CHNG_END_HSCH0_INT_ST_S + channel)) {
speed_mode = LEDC_HIGH_SPEED_MODE;
} else {
speed_mode = LEDC_LOW_SPEED_MODE;
}
if (s_ledc_fade_rec[speed_mode][channel] == NULL) {
//fade object not initialized yet.
continue;
}
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
2017-05-11 22:43:37 -04:00
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
if (duty_cur == s_ledc_fade_rec[speed_mode][channel]->target_duty) {
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
xSemaphoreGiveFromISR(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, &HPTaskAwoken);
if (HPTaskAwoken == pdTRUE) {
portYIELD_FROM_ISR();
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
continue;
}
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
2017-05-11 22:43:37 -04:00
uint32_t duty_tar = s_ledc_fade_rec[speed_mode][channel]->target_duty;
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
int scale = s_ledc_fade_rec[speed_mode][channel]->scale;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (scale == 0) {
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
xSemaphoreGiveFromISR(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, &HPTaskAwoken);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
continue;
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
int cycle = s_ledc_fade_rec[speed_mode][channel]->cycle_num;
int delta = s_ledc_fade_rec[speed_mode][channel]->direction == LEDC_DUTY_DIR_DECREASE ? duty_cur - duty_tar : duty_tar - duty_cur;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
int step = delta / scale > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : delta / scale;
if (delta > scale) {
ledc_duty_config(
speed_mode,
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
channel,
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
LEDC_VAL_NO_CHANGE,
duty_cur << LEDC_DUTY_DECIMAL_BIT_NUM,
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
s_ledc_fade_rec[speed_mode][channel]->direction,
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
step,
cycle,
scale);
} else {
ledc_duty_config(
speed_mode,
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
channel,
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
LEDC_VAL_NO_CHANGE,
duty_tar << LEDC_DUTY_DECIMAL_BIT_NUM,
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
s_ledc_fade_rec[speed_mode][channel]->direction,
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
1,
1,
0);
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
LEDC.channel_group[speed_mode].channel[channel].conf1.duty_start = 1;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
}
LEDC.int_clr.val = intr_status; //clear LEDC interrupt status.
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
static esp_err_t ledc_fade_channel_deinit(ledc_mode_t speed_mode, ledc_channel_t channel)
{
if (s_ledc_fade_rec[speed_mode][channel]) {
if (s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux) {
vSemaphoreDelete(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux);
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux = NULL;
}
if (s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem) {
vSemaphoreDelete(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem);
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem = NULL;
}
free(s_ledc_fade_rec[speed_mode][channel]);
s_ledc_fade_rec[speed_mode][channel] = NULL;
}
return ESP_OK;
}
static esp_err_t ledc_fade_channel_init_check(ledc_mode_t speed_mode, ledc_channel_t channel)
{
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
if (s_ledc_fade_isr_handle == NULL) {
ESP_LOGE(LEDC_TAG, "Fade service not installed, call ledc_fade_func_install");
return ESP_FAIL;
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
if (s_ledc_fade_rec[speed_mode][channel] == NULL) {
esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-03-29 23:39:42 -04:00
#if CONFIG_SPIRAM_USE_MALLOC
s_ledc_fade_rec[speed_mode][channel] = (ledc_fade_t *) heap_caps_calloc(1, sizeof(ledc_fade_t), MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT);
if (!s_ledc_fade_rec[speed_mode][channel]) {
ledc_fade_channel_deinit(speed_mode, channel);
return ESP_FAIL;
}
memset(&s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem_storage, 0, sizeof(StaticQueue_t));
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem = xSemaphoreCreateBinaryStatic(&s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem_storage);
#else
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
s_ledc_fade_rec[speed_mode][channel] = (ledc_fade_t *) calloc(1, sizeof(ledc_fade_t));
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem = xSemaphoreCreateBinary();
esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-03-29 23:39:42 -04:00
#endif
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux = xSemaphoreCreateMutex();
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
xSemaphoreGive(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem);
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
}
if (s_ledc_fade_rec[speed_mode][channel]
&& s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux
&& s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem) {
return ESP_OK;
} else {
ledc_fade_channel_deinit(speed_mode, channel);
return ESP_FAIL;
}
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
static esp_err_t _ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int scale, int cycle_num)
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
{
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
portENTER_CRITICAL(&ledc_spinlock);
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
bugfix(ledc): fix bugs reported from unit-test and github. 1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082 2. fix ledc_set_freq function for low speed mode.
2018-07-09 13:25:31 -04:00
// When duty == max_duty, meanwhile, if scale == 1 and fade_down == 1, counter would overflow.
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
if (duty_cur == ledc_get_max_duty(speed_mode, channel)) {
duty_cur -= 1;
}
s_ledc_fade_rec[speed_mode][channel]->speed_mode = speed_mode;
s_ledc_fade_rec[speed_mode][channel]->target_duty = target_duty;
s_ledc_fade_rec[speed_mode][channel]->cycle_num = cycle_num;
s_ledc_fade_rec[speed_mode][channel]->scale = scale;
int step_num = 0;
int dir = LEDC_DUTY_DIR_DECREASE;
if (scale > 0) {
if (duty_cur > target_duty) {
s_ledc_fade_rec[speed_mode][channel]->direction = LEDC_DUTY_DIR_DECREASE;
step_num = (duty_cur - target_duty) / scale;
step_num = step_num > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : step_num;
} else {
s_ledc_fade_rec[speed_mode][channel]->direction = LEDC_DUTY_DIR_INCREASE;
dir = LEDC_DUTY_DIR_INCREASE;
step_num = (target_duty - duty_cur) / scale;
step_num = step_num > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : step_num;
}
}
bugfix(ledc): fix bugs reported from unit-test and github. 1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082 2. fix ledc_set_freq function for low speed mode.
2018-07-09 13:25:31 -04:00
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
portEXIT_CRITICAL(&ledc_spinlock);
if (scale > 0 && step_num > 0) {
ledc_duty_config(speed_mode, channel, LEDC_VAL_NO_CHANGE, duty_cur << 4, dir, step_num, cycle_num, scale);
ESP_LOGD(LEDC_TAG, "cur duty: %d; target: %d, step: %d, cycle: %d; scale: %d; dir: %d\n",
duty_cur, target_duty, step_num, cycle_num, scale, dir);
} else {
ledc_duty_config(speed_mode, channel, LEDC_VAL_NO_CHANGE, target_duty << 4, dir, 0, 1, 0);
ESP_LOGD(LEDC_TAG, "Set to target duty: %d", target_duty);
}
return ESP_OK;
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
static esp_err_t _ledc_set_fade_with_time(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int max_fade_time_ms)
{
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
int timer_sel = LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel;
uint32_t freq = ledc_get_freq(speed_mode, timer_sel);
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
2017-05-11 22:43:37 -04:00
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
uint32_t duty_delta = target_duty > duty_cur ? target_duty - duty_cur : duty_cur - target_duty;
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
if (duty_delta == 0) {
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
return _ledc_set_fade_with_step(speed_mode, channel, target_duty, 0, 0);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
int total_cycles = max_fade_time_ms * freq / 1000;
bugfix(ledc): fix integer divided by zero in function ledc_set_fade_with_time
2017-07-21 07:06:44 -04:00
if (total_cycles == 0) {
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
ESP_LOGW(LEDC_TAG, LEDC_FADE_TOO_FAST_STR);
return _ledc_set_fade_with_step(speed_mode, channel, target_duty, 0, 0);
bugfix(ledc): fix integer divided by zero in function ledc_set_fade_with_time
2017-07-21 07:06:44 -04:00
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
int scale, cycle_num;
if (total_cycles > duty_delta) {
scale = 1;
cycle_num = total_cycles / duty_delta;
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
if (cycle_num > LEDC_DUTY_NUM_HSCH0_V) {
ESP_LOGW(LEDC_TAG, LEDC_FADE_TOO_SLOW_STR);
cycle_num = LEDC_DUTY_NUM_HSCH0_V;
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
} else {
cycle_num = 1;
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
scale = duty_delta / total_cycles;
driver(ledc): fix ledc fade API and update the register header file 1. fix error when fading is too fast 2. fix error when setting duty and update immediately 3. update register header file to be in accord with TRM closes https://github.com/espressif/esp-idf/issues/2903
2019-01-10 08:45:51 -05:00
if (scale > LEDC_DUTY_SCALE_HSCH0_V) {
ESP_LOGW(LEDC_TAG, LEDC_FADE_TOO_FAST_STR);
scale = LEDC_DUTY_SCALE_HSCH0_V;
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
return _ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
static void _ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t fade_mode)
{
s_ledc_fade_rec[speed_mode][channel]->mode = fade_mode;
// Clear interrupt status of channel
int duty_resolution_ch0 = (speed_mode == LEDC_HIGH_SPEED_MODE) ? LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_S : LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S;
LEDC.int_clr.val |= BIT(duty_resolution_ch0 + channel);
// Enable interrupt for channel
ledc_enable_intr_type(speed_mode, channel, LEDC_INTR_FADE_END);
ledc_update_duty(speed_mode, channel);
if (fade_mode == LEDC_FADE_WAIT_DONE) {
xSemaphoreTake(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, portMAX_DELAY);
}
}
esp_err_t ledc_set_fade_with_time(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int max_fade_time_ms)
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
{
ledc driver: Clarify logging of function argument errors Some parameter errors did not specify which parameter was invalid. Adds a new macro to name the invalid param.
2018-05-10 05:18:17 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_fade_hw_acquire(speed_mode, channel);
_ledc_set_fade_with_time(speed_mode, channel, target_duty, max_fade_time_ms);
_ledc_fade_hw_release(speed_mode, channel);
return ESP_OK;
}
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
esp_err_t ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t scale, uint32_t cycle_num)
{
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
LEDC_ARG_CHECK((scale > 0) && (scale <= LEDC_DUTY_SCALE_HSCH0_V), "fade scale");
LEDC_ARG_CHECK((cycle_num > 0) && (cycle_num <= LEDC_DUTY_CYCLE_HSCH0_V), "cycle_num");
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_fade_hw_acquire(speed_mode, channel);
_ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
_ledc_fade_hw_release(speed_mode, channel);
return ESP_OK;
}
esp_err_t ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t fade_mode)
{
LEDC_CHECK(s_ledc_fade_rec != NULL, LEDC_FADE_SERVICE_ERR_STR, ESP_ERR_INVALID_STATE);
LEDC_ARG_CHECK(fade_mode < LEDC_FADE_MAX, "fade_mode");
_ledc_fade_hw_acquire(speed_mode, channel);
_ledc_fade_start(speed_mode, channel, fade_mode);
_ledc_fade_hw_release(speed_mode, channel);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
return ESP_OK;
}
esp_err_t ledc_fade_func_install(int intr_alloc_flags)
{
//OR intr_alloc_flags with ESP_INTR_FLAG_IRAM because the fade isr is in IRAM
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
return ledc_isr_register(ledc_fade_isr, NULL, intr_alloc_flags | ESP_INTR_FLAG_IRAM, &s_ledc_fade_isr_handle);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
tools: Mass fixing of empty prototypes (for -Wstrict-prototypes)
2019-07-16 05:33:30 -04:00
void ledc_fade_func_uninstall(void)
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
{
if (s_ledc_fade_rec == NULL) {
return;
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
if (s_ledc_fade_isr_handle) {
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
esp_intr_free(s_ledc_fade_isr_handle);
s_ledc_fade_isr_handle = NULL;
}
Feature: add ledc low speed channels 1. Add low speed channels for LEDC module. 2. Improve fade object allocate mechanism. 3. Improve ledc example, add 2 low speed channels in example. 4. Remove debug code 5. Improve the register bit field name of slow clock.
2017-02-08 06:52:18 -05:00
int channel, mode;
for (mode = 0; mode < LEDC_SPEED_MODE_MAX; mode++) {
for (channel = 0; channel < LEDC_CHANNEL_MAX; channel++) {
ledc_fade_channel_deinit(mode, channel);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
}
return;
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
/*
* The functions below are thread-safe version of APIs for duty and fade control.
* These APIs can be called from different tasks.
*/
esp_err_t ledc_set_duty_and_update(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, uint32_t hpoint)
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
{
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
LEDC_ARG_CHECK(duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
bugfix(ledc): fix bugs reported from unit-test and github. 1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082 2. fix ledc_set_freq function for low speed mode.
2018-07-09 13:25:31 -04:00
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_op_lock_acquire(speed_mode, channel);
_ledc_fade_hw_acquire(speed_mode, channel);
driver(ledc): fix ledc fade API and update the register header file 1. fix error when fading is too fast 2. fix error when setting duty and update immediately 3. update register header file to be in accord with TRM closes https://github.com/espressif/esp-idf/issues/2903
2019-01-10 08:45:51 -05:00
_ledc_set_fade_with_step(speed_mode, channel, duty, 0, 1);
bugfix(ledc): fix bugs reported from unit-test and github. 1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082 2. fix ledc_set_freq function for low speed mode.
2018-07-09 13:25:31 -04:00
_ledc_fade_start(speed_mode, channel, LEDC_FADE_WAIT_DONE);
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_fade_hw_release(speed_mode, channel);
_ledc_op_lock_release(speed_mode, channel);
return ESP_OK;
}
esp_err_t ledc_set_fade_time_and_start(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t max_fade_time_ms, ledc_fade_mode_t fade_mode)
{
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
LEDC_ARG_CHECK(fade_mode < LEDC_FADE_MAX, "fade_mode");
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
_ledc_op_lock_acquire(speed_mode, channel);
_ledc_fade_hw_acquire(speed_mode, channel);
_ledc_set_fade_with_time(speed_mode, channel, target_duty, max_fade_time_ms);
_ledc_fade_start(speed_mode, channel, fade_mode);
if (fade_mode == LEDC_FADE_WAIT_DONE) {
_ledc_fade_hw_release(speed_mode, channel);
}
_ledc_op_lock_release(speed_mode, channel);
return ESP_OK;
}
esp_err_t ledc_set_fade_step_and_start(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t scale, uint32_t cycle_num, ledc_fade_mode_t fade_mode)
{
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
LEDC_ARG_CHECK(fade_mode < LEDC_FADE_MAX, "fade_mode");
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
LEDC_ARG_CHECK((scale > 0) && (scale <= LEDC_DUTY_SCALE_HSCH0_V), "fade scale");
LEDC_ARG_CHECK((cycle_num > 0) && (cycle_num <= LEDC_DUTY_CYCLE_HSCH0_V), "cycle_num");
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
_ledc_op_lock_acquire(speed_mode, channel);
_ledc_fade_hw_acquire(speed_mode, channel);
_ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
_ledc_fade_start(speed_mode, channel, fade_mode);
if (fade_mode == LEDC_FADE_WAIT_DONE) {
_ledc_fade_hw_release(speed_mode, channel);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
}
driver(ledc): fix duty and fade issues and add thread-safe version APIs. 1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
2018-04-12 03:38:39 -04:00
_ledc_op_lock_release(speed_mode, channel);
driver: ledc - update fading functions, add example and doc 1. add fading functions. 2. clear up ledc.c and ledc.h 3. update api doc. 4. add ledc example 5. edit ledc.rst and add readme for example code. 6. add s_ prefix for static global values. 7. add mutex for fade functions 8. minor changes according to the comments.
2016-12-25 10:11:24 -05:00
return ESP_OK;
}
Reference in New Issue Copy Permalink