Virtual filesystem (VFS) component provides a unified interface for drivers which can perform operations on file-like objects. These can be real filesystems (FAT, SPIFFS, etc.) or device drivers which provide a file-like interface.
This component allows C library functions, such as fopen and fprintf, to work with FS drivers. At a high level, each FS driver is associated with some path prefix. When one of C library functions needs to open a file, the VFS component searches for the FS driver associated with the file path and forwards the call to that driver. VFS also forwards read, write, and other calls for the given file to the same FS driver.
For example, one can register a FAT filesystem driver with the ``/fat`` prefix and call ``fopen("/fat/file.txt", "w")``. The VFS component will then call the function ``open`` of the FAT driver and pass the argument ``/file.txt`` to it together with appropriate mode flags. All subsequent calls to C library functions for the returned ``FILE*`` stream will also be forwarded to the FAT driver.
FS registration
---------------
To register an FS driver, an application needs to define an instance of the :cpp:type:`esp_vfs_t` structure and populate it with function pointers to FS APIs:
3. The file descriptors belonging to non-socket VFS drivers are handed over to the given VFS drivers by :cpp:func:`start_select`, described later on this page. This function represents the driver-specific implementation of :cpp:func:`select` for the given driver. This should be a non-blocking call which means the function should immediately return after setting up the environment for checking events related to the given file descriptors.
4. The file descriptors belonging to the socket VFS driver are handed over to the socket driver by :cpp:func:`socket_select` described later on this page. This is a blocking call which means that it will return only if there is an event related to socket file descriptors or a non-socket driver signals :cpp:func:`socket_select` to exit.
5. Results are collected from each VFS driver and all drivers are stopped by de-initialization of the environment for checking events.
If you want to use :cpp:func:`select` with a file descriptor belonging to a non-socket VFS driver, then you need to register the driver with functions :cpp:func:`start_select` and :cpp:func:`end_select` similarly to the following example:
:cpp:func:`start_select` is called for setting up the environment for detection of read/write/error conditions on file descriptors belonging to the given VFS driver.
:cpp:func:`end_select` might be called without a previous :cpp:func:`start_select` call in some rare circumstances. :cpp:func:`end_select` should fail gracefully if this is the case (i.e., should not crash but return an error instead).
Please refer to the reference implementation for the UART peripheral in :component_file:`vfs/vfs_uart.c` and most particularly to the functions :cpp:func:`esp_vfs_dev_uart_register`, :cpp:func:`uart_start_select`, and :cpp:func:`uart_end_select` for more information.
A socket VFS driver is using its own internal implementation of :cpp:func:`select` and non-socket VFS drivers notify it upon read/write/error conditions.
:cpp:func:`socket_select` is the internal implementation of :cpp:func:`select` for the socket driver. It works only with file descriptors belonging to the socket VFS.
:cpp:func:`get_socket_select_semaphore` returns the signalization object (semaphore) which will be used in non-socket drivers to stop the waiting in :cpp:func:`socket_select`.
:cpp:func:`stop_socket_select` call is used to stop the waiting in :cpp:func:`socket_select` by passing the object returned by :cpp:func:`get_socket_select_semaphore`.
If :cpp:func:`select` is only used on socket file descriptors, you can enable the :envvar:`CONFIG_LWIP_USE_ONLY_LWIP_SELECT` option to reduce the code size and improve performance.
You should not change the socket driver during an active :cpp:func:`select` call or you might experience some undefined behavior.
Each registered FS has a path prefix associated with it. This prefix can be considered as a "mount point" of this partition.
In case when mount points are nested, the mount point with the longest matching path prefix is used when opening the file. For instance, suppose that the following filesystems are registered in VFS:
- FS 1 on /data
- FS 2 on /data/static
Then:
- FS 1 will be used when opening a file called ``/data/log.txt``
- FS 2 will be used when opening a file called ``/data/static/index.html``
- Even if ``/index.html"`` does not exist in FS 2, FS 1 will *not* be searched for ``/static/index.html``.
As a general rule, mount point names must start with the path separator (``/``) and must contain at least one character after path separator. However, an empty mount point name is also supported and might be used in cases when an application needs to provide a "fallback" filesystem or to override VFS functionality altogether. Such filesystem will be used if no prefix matches the path given.
VFS does not handle dots (``.``) in path names in any special way. VFS does not treat ``..`` as a reference to the parent directory. In the above example, using a path ``/data/static/../log.txt`` will not result in a call to FS 1 to open ``/log.txt``. Specific FS drivers (such as FATFS) might handle dots in file names differently.
When opening files, the FS driver receives only relative paths to files. For example:
1. The ``myfs`` driver is registered with ``/data`` as a path prefix.
2. The application calls ``fopen("/data/config.json", ...)``.
3. The VFS component calls ``myfs_open("/config.json", ...)``.
4. The ``myfs`` driver opens the ``/config.json`` file.
VFS does not impose any limit on total file path length, but it does limit the FS path prefix to ``ESP_VFS_PATH_MAX`` characters. Individual FS drivers may have their own filename length limitations.
File descriptors
----------------
File descriptors are small positive integers from ``0`` to ``FD_SETSIZE - 1``, where ``FD_SETSIZE`` is defined in newlib's ``sys/types.h``. The largest file descriptors (configured by ``CONFIG_LWIP_MAX_SOCKETS``) are reserved for sockets. The VFS component contains a lookup-table called ``s_fd_table`` for mapping global file descriptors to VFS driver indexes registered in the ``s_vfs`` array.
Standard IO streams (stdin, stdout, stderr)
-------------------------------------------
If the menuconfig option ``UART for console output`` is not set to ``None``, then ``stdin``, ``stdout``, and ``stderr`` are configured to read from, and write to, a UART. It is possible to use UART0 or UART1 for standard IO. By default, UART0 is used with 115200 baud rate; TX pin is GPIO1; RX pin is GPIO3. These parameters can be changed in menuconfig.
Writing to ``stdout`` or ``stderr`` will send characters to the UART transmit FIFO. Reading from ``stdin`` will retrieve characters from the UART receive FIFO.
By default, VFS uses simple functions for reading from and writing to UART. Writes busy-wait until all data is put into UART FIFO, and reads are non-blocking, returning only the data present in the FIFO. Due to this non-blocking read behavior, higher level C library calls, such as ``fscanf("%d\n", &var);``, might not have desired results.
Applications which use the UART driver can instruct VFS to use the driver's interrupt driven, blocking read and write functions instead. This can be done using a call to the ``esp_vfs_dev_uart_use_driver`` function. It is also possible to revert to the basic non-blocking functions using a call to ``esp_vfs_dev_uart_use_nonblocking``.
VFS also provides an optional newline conversion feature for input and output. Internally, most applications send and receive lines terminated by the LF (''\n'') character. Different terminal programs may require different line termination, such as CR or CRLF. Applications can configure this separately for input and output either via menuconfig, or by calls to the functions ``esp_vfs_dev_uart_port_set_rx_line_endings`` and ``esp_vfs_dev_uart_port_set_tx_line_endings``.
Standard streams and FreeRTOS tasks
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
``FILE`` objects for ``stdin``, ``stdout``, and ``stderr`` are shared between all FreeRTOS tasks, but the pointers to these objects are stored in per-task ``struct _reent``.
The following code is transferred to ``fprintf(__getreent()->_stderr, "42\n");`` by the preprocessor:
..highlight:: c
::
fprintf(stderr, "42\n");
The ``__getreent()`` function returns a per-task pointer to ``struct _reent`` in newlib libc. This structure is allocated on the TCB of each task. When a task is initialized, ``_stdin``, ``_stdout``, and ``_stderr`` members of ``struct _reent`` are set to the values of ``_stdin``, ``_stdout``, and ``_stderr`` of ``_GLOBAL_REENT`` (i.e., the structure which is used before FreeRTOS is started).
Such a design has the following consequences:
- It is possible to set ``stdin``, ``stdout``, and ``stderr`` for any given task without affecting other tasks, e.g., by doing ``stdin = fopen("/dev/uart/1", "r")``.
- Closing default ``stdin``, ``stdout``, or ``stderr`` using ``fclose`` will close the ``FILE`` stream object, which will affect all other tasks.
- To change the default ``stdin``, ``stdout``, ``stderr`` streams for new tasks, modify ``_GLOBAL_REENT->_stdin`` (``_stdout``, ``_stderr``) before creating the task.
``eventfd()`` call is a powerful tool to notify a ``select()`` based loop of custom events. The ``eventfd()`` implementation in ESP-IDF is generally the same as described in `man(2) eventfd <https://man7.org/linux/man-pages/man2/eventfd.2.html>`_ except for:
Note that creating an eventfd with ``EFD_SUPPORT_ISR`` will cause interrupts to be temporarily disabled when reading, writing the file and during the beginning and the ending of the ``select()`` when this file is set.
