esp-idf/components/bootloader/Makefile.projbuild

109 lines
4.0 KiB
Makefile
Raw Normal View History

2016-08-17 11:08:22 -04:00
#
# Bootloader component
#
# The bootloader is not a real component that gets linked into the project.
# Instead it is an entire standalone project ( in src/) that gets built in
# the upper projects build directory. This Makefile.projbuild provides the
# glue to build the bootloader project from the original project. It
# basically runs Make in the src/ directory but it needs to zero some variables
# the ESP-IDF project.mk makefile exports first, to not let them interfere.
2016-08-17 11:08:22 -04:00
#
ifndef IS_BOOTLOADER_BUILD
2016-08-17 11:08:22 -04:00
BOOTLOADER_COMPONENT_PATH := $(COMPONENT_PATH)
BOOTLOADER_BUILD_DIR=$(abspath $(BUILD_DIR_BASE)/bootloader)
BOOTLOADER_BIN=$(BOOTLOADER_BUILD_DIR)/bootloader.bin
BOOTLOADER_SDKCONFIG=$(BOOTLOADER_BUILD_DIR)/sdkconfig
2016-08-17 11:08:22 -04:00
SECURE_BOOT_KEYFILE=$(abspath $(call dequote,$(CONFIG_SECURE_BOOTLOADER_KEY_FILE)))
# Custom recursive make for bootloader sub-project
BOOTLOADER_MAKE=+$(MAKE) -C $(BOOTLOADER_COMPONENT_PATH)/src \
V=$(V) SDKCONFIG=$(BOOTLOADER_SDKCONFIG) \
BUILD_DIR_BASE=$(BOOTLOADER_BUILD_DIR) \
.PHONY: bootloader-clean bootloader-flash bootloader $(BOOTLOADER_BIN)
2016-08-17 11:08:22 -04:00
$(BOOTLOADER_BIN): | $(BOOTLOADER_BUILD_DIR)/sdkconfig
$(Q) $(BOOTLOADER_MAKE) $@
2016-08-17 11:08:22 -04:00
bootloader-clean:
$(Q) $(BOOTLOADER_MAKE) app-clean config-clean
$(Q) rm -f $(BOOTLOADER_SDKCONFIG) $(BOOTLOADER_SDKCONFIG).old
2016-08-17 11:08:22 -04:00
clean: bootloader-clean
ifdef CONFIG_SECURE_BOOTLOADER_DISABLED
# If secure boot disabled, bootloader flashing is integrated
# with 'make flash' and no warnings are printed.
bootloader: $(BOOTLOADER_BIN)
@echo "$(SEPARATOR)"
@echo "Bootloader built. Default flash command is:"
@echo "$(ESPTOOLPY_WRITE_FLASH) 0x1000 $(BOOTLOADER_BIN)"
2016-08-17 11:08:22 -04:00
ESPTOOL_ALL_FLASH_ARGS += 0x1000 $(BOOTLOADER_BIN)
2016-08-17 11:08:22 -04:00
bootloader-flash: $(BOOTLOADER_BIN)
$(BOOTLOADER_MAKE) flash
else ifdef CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH
# One time flashing requires user to run esptool.py command themselves,
# and warning is printed about inability to reflash.
bootloader: $(BOOTLOADER_BIN)
@echo $(SEPARATOR)
@echo "Bootloader built. One-time flash command is:"
@echo "$(ESPTOOLPY_WRITE_FLASH) 0x1000 $(BOOTLOADER_BIN)"
@echo $(SEPARATOR)
@echo "* IMPORTANT: After first boot, BOOTLOADER CANNOT BE RE-FLASHED on same device"
else ifdef CONFIG_SECURE_BOOTLOADER_REFLASHABLE
# Reflashable secure bootloader (recommended for testing only)
# generates a digest binary (bootloader + digest) and prints
# instructions for reflashing. User must run commands manually.
BOOTLOADER_DIGEST_BIN=$(BOOTLOADER_BUILD_DIR)/bootloader-reflash-digest.bin
bootloader: $(BOOTLOADER_DIGEST_BIN)
@echo $(SEPARATOR)
@echo "Bootloader built and secure digest generated. First time flash command is:"
@echo "$(ESPEFUSEPY) burn_key secure_boot $(SECURE_BOOT_KEYFILE)"
@echo "$(ESPTOOLPY_WRITE_FLASH) 0x1000 $(BOOTLOADER_BIN)"
@echo $(SEPARATOR)
@echo "To reflash the bootloader after initial flash:"
@echo "$(ESPTOOLPY_WRITE_FLASH) 0x0 $(BOOTLOADER_DIGEST_BIN)"
@echo $(SEPARATOR)
@echo "* After first boot, only re-flashes of this kind (with same key) will be accepted."
@echo "* NOT RECOMMENDED TO RE-FLASH the same bootloader-reflash-digest.bin to multiple production devices"
$(BOOTLOADER_DIGEST_BIN): $(BOOTLOADER_BIN) $(SECURE_BOOT_KEYFILE)
@echo "DIGEST $< + $(SECURE_BOOT_KEYFILE) -> $@"
$(Q) $(ESPSECUREPY) digest_secure_bootloader -k $(SECURE_BOOT_KEYFILE) -o $@ $<
$(SECURE_BOOT_KEYFILE):
@echo $(SEPARATOR)
@echo "Need to generate secure boot digest key first. Run following command:"
@echo "$(ESPSECUREPY) generate_key $@"
@echo "Keep key file safe after generating."
@exit 1
else
$(error Bad sdkconfig - one of CONFIG_SECURE_BOOTLOADER_DISABLED, CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH, CONFIG_SECURE_BOOTLOADER_REFLASHABLE must be set)
endif
all_binaries: $(BOOTLOADER_BIN)
# synchronise the project level config to the bootloader's
# config
$(BOOTLOADER_SDKCONFIG): $(PROJECT_PATH)/sdkconfig | $(BOOTLOADER_BUILD_DIR)
$(Q) cp $< $@
$(BOOTLOADER_BUILD_DIR):
$(Q) mkdir -p $@
else
CFLAGS += -D BOOTLOADER_BUILD=1 -I $(IDF_PATH)/components/esp32/include
endif