// Set MINIZ_HAS_64BIT_REGISTERS to 1 if operations on 64-bit integers are reasonably fast (and don't involve compiler generated calls to helper functions).
#define MINIZ_HAS_64BIT_REGISTERS 1
#endif
#ifdef __cplusplus
extern"C"{
#endif
// ------------------- zlib-style API Definitions.
// For more compatibility with zlib, miniz.c uses unsigned long for some parameters/struct members. Beware: mz_ulong can be either 32 or 64-bits!
typedefunsignedlongmz_ulong;
// mz_free() internally uses the MZ_FREE() macro (which by default calls free() unless you've modified the MZ_MALLOC macro) to release a block allocated from the heap.
voidmz_free(void*p);
#define MZ_ADLER32_INIT (1)
// mz_adler32() returns the initial adler-32 value to use when called with ptr==NULL.
// Compression levels: 0-9 are the standard zlib-style levels, 10 is best possible compression (not zlib compatible, and may be very slow), MZ_DEFAULT_COMPRESSION=MZ_DEFAULT_LEVEL.
constunsignedchar*next_in;// pointer to next byte to read
unsignedintavail_in;// number of bytes available at next_in
mz_ulongtotal_in;// total number of bytes consumed so far
unsignedchar*next_out;// pointer to next byte to write
unsignedintavail_out;// number of bytes that can be written to next_out
mz_ulongtotal_out;// total number of bytes produced so far
char*msg;// error msg (unused)
structmz_internal_state*state;// internal state, allocated by zalloc/zfree
mz_alloc_funczalloc;// optional heap allocation function (defaults to malloc)
mz_free_funczfree;// optional heap free function (defaults to free)
void*opaque;// heap alloc function user pointer
intdata_type;// data_type (unused)
mz_ulongadler;// adler32 of the source or uncompressed data
mz_ulongreserved;// not used
}mz_stream;
typedefmz_stream*mz_streamp;
// Returns the version string of miniz.c.
constchar*mz_version(void);
// mz_deflateInit() initializes a compressor with default options:
// Parameters:
// pStream must point to an initialized mz_stream struct.
// level must be between [MZ_NO_COMPRESSION, MZ_BEST_COMPRESSION].
// level 1 enables a specially optimized compression function that's been optimized purely for performance, not ratio.
// (This special func. is currently only enabled when MINIZ_USE_UNALIGNED_LOADS_AND_STORES and MINIZ_LITTLE_ENDIAN are defined.)
// Return values:
// MZ_OK on success.
// MZ_STREAM_ERROR if the stream is bogus.
// MZ_PARAM_ERROR if the input parameters are bogus.
// MZ_MEM_ERROR on out of memory.
intmz_deflateInit(mz_streamppStream,intlevel);
// mz_deflateInit2() is like mz_deflate(), except with more control:
// Additional parameters:
// method must be MZ_DEFLATED
// window_bits must be MZ_DEFAULT_WINDOW_BITS (to wrap the deflate stream with zlib header/adler-32 footer) or -MZ_DEFAULT_WINDOW_BITS (raw deflate/no header or footer)
// mem_level must be between [1, 9] (it's checked but ignored by miniz.c)
// Quickly resets a compressor without having to reallocate anything. Same as calling mz_deflateEnd() followed by mz_deflateInit()/mz_deflateInit2().
intmz_deflateReset(mz_streamppStream);
// mz_deflate() compresses the input to output, consuming as much of the input and producing as much output as possible.
// Parameters:
// pStream is the stream to read from and write to. You must initialize/update the next_in, avail_in, next_out, and avail_out members.
// flush may be MZ_NO_FLUSH, MZ_PARTIAL_FLUSH/MZ_SYNC_FLUSH, MZ_FULL_FLUSH, or MZ_FINISH.
// Return values:
// MZ_OK on success (when flushing, or if more input is needed but not available, and/or there's more output to be written but the output buffer is full).
// MZ_STREAM_END if all input has been consumed and all output bytes have been written. Don't call mz_deflate() on the stream anymore.
// MZ_STREAM_ERROR if the stream is bogus.
// MZ_PARAM_ERROR if one of the parameters is invalid.
// MZ_BUF_ERROR if no forward progress is possible because the input and/or output buffers are empty. (Fill up the input buffer or free up some output space and try again.)
intmz_deflate(mz_streamppStream,intflush);
// mz_deflateEnd() deinitializes a compressor:
// Return values:
// MZ_OK on success.
// MZ_STREAM_ERROR if the stream is bogus.
intmz_deflateEnd(mz_streamppStream);
// mz_deflateBound() returns a (very) conservative upper bound on the amount of data that could be generated by deflate(), assuming flush is set to only MZ_NO_FLUSH or MZ_FINISH.
// mz_compressBound() returns a (very) conservative upper bound on the amount of data that could be generated by calling mz_compress().
mz_ulongmz_compressBound(mz_ulongsource_len);
// Initializes a decompressor.
intmz_inflateInit(mz_streamppStream);
// mz_inflateInit2() is like mz_inflateInit() with an additional option that controls the window size and whether or not the stream has been wrapped with a zlib header/footer:
// window_bits must be MZ_DEFAULT_WINDOW_BITS (to parse zlib header/footer) or -MZ_DEFAULT_WINDOW_BITS (raw deflate).
// Decompresses the input stream to the output, consuming only as much of the input as needed, and writing as much to the output as possible.
// Parameters:
// pStream is the stream to read from and write to. You must initialize/update the next_in, avail_in, next_out, and avail_out members.
// flush may be MZ_NO_FLUSH, MZ_SYNC_FLUSH, or MZ_FINISH.
// On the first call, if flush is MZ_FINISH it's assumed the input and output buffers are both sized large enough to decompress the entire stream in a single call (this is slightly faster).
// MZ_FINISH implies that there are no more source bytes available beside what's already in the input buffer, and that the output buffer is large enough to hold the rest of the decompressed data.
// Return values:
// MZ_OK on success. Either more input is needed but not available, and/or there's more output to be written but the output buffer is full.
// MZ_STREAM_END if all needed input has been consumed and all output bytes have been written. For zlib streams, the adler-32 of the decompressed data has also been verified.
// MZ_STREAM_ERROR if the stream is bogus.
// MZ_DATA_ERROR if the deflate stream is invalid.
// MZ_PARAM_ERROR if one of the parameters is invalid.
// MZ_BUF_ERROR if no forward progress is possible because the input buffer is empty but the inflater needs more input to continue, or if the output buffer is not large enough. Call mz_inflate() again
// with more input data, or with more room in the output buffer (except when using single call decompression, described above).
intmz_inflate(mz_streamppStream,intflush);
// Deinitializes a decompressor.
intmz_inflateEnd(mz_streamppStream);
// Single-call decompression.
// Returns MZ_OK on success, or one of the error codes from mz_inflate() on failure.
// Retrieves the filename of an archive file entry.
// Returns the number of bytes written to pFilename, or if filename_buf_size is 0 this function returns the number of bytes needed to fully store the filename.
// Converts a ZIP archive reader object into a writer object, to allow efficient in-place file appends to occur on an existing archive.
// For archives opened using mz_zip_reader_init_file, pFilename must be the archive's filename so it can be reopened for writing. If the file can't be reopened, mz_zip_reader_end() will be called.
// For archives opened using mz_zip_reader_init_mem, the memory block must be growable using the realloc callback (which defaults to realloc unless you've overridden it).
// Finally, for archives opened using mz_zip_reader_init, the mz_zip_archive's user provided m_pWrite function cannot be NULL.
// Note: In-place archive modification is not recommended unless you know what you're doing, because if execution stops or something goes wrong before
// the archive is finalized the file's central directory will be hosed.
// Adds the contents of a memory buffer to an archive. These functions record the current local time into the archive.
// To add a directory entry, call this method with an archive name ending in a forwardslash with empty buffer.
// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION.
// Adds the contents of a disk file to an archive. This function also records the disk file's modified time into the archive.
// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION.
// Ends archive writing, freeing all allocations, and closing the output file if mz_zip_writer_init_file() was used.
// Note for the archive to be valid, it must have been finalized before ending.
mz_boolmz_zip_writer_end(mz_zip_archive*pZip);
// Misc. high-level helper functions:
// mz_zip_add_mem_to_archive_file_in_place() efficiently (but not atomically) appends a memory blob to a ZIP archive.
// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION.
// Note: Due to MINIZ_NO_MALLOC, this function will not work.
//
void*mz_zip_extract_archive_file_to_heap(constchar*pZip_filename,constchar*pArchive_name,size_t*pSize,mz_uintzip_flags)__attribute__((warning("miniz is compiled without malloc so this function does not work")));
// ------------------- Low-level Decompression API Definitions
// Decompression flags used by tinfl_decompress().
// TINFL_FLAG_PARSE_ZLIB_HEADER: If set, the input has a valid zlib header and ends with an adler32 checksum (it's a valid zlib stream). Otherwise, the input is a raw deflate stream.
// TINFL_FLAG_HAS_MORE_INPUT: If set, there are more input bytes available beyond the end of the supplied input buffer. If clear, the input buffer contains all remaining input.
// TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF: If set, the output buffer is large enough to hold the entire decompressed stream. If clear, the output buffer is at least the size of the dictionary (typically 32KB).
// TINFL_FLAG_COMPUTE_ADLER32: Force adler-32 checksum computation of the decompressed bytes.
enum
{
TINFL_FLAG_PARSE_ZLIB_HEADER=1,
TINFL_FLAG_HAS_MORE_INPUT=2,
TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF=4,
TINFL_FLAG_COMPUTE_ADLER32=8
};
// High level decompression functions:
// tinfl_decompress_mem_to_heap() decompresses a block in memory to a heap block allocated via malloc().
// On entry:
// pSrc_buf, src_buf_len: Pointer and size of the Deflate or zlib source data to decompress.
// On return:
// Function returns a pointer to the decompressed data, or NULL on failure.
// *pOut_len will be set to the decompressed data's size, which could be larger than src_buf_len on uncompressible data.
// The caller must call mz_free() on the returned block when it's no longer needed.
// Note: Due to MINIZ_NO_MALLOC, this function will not work.
//
void*tinfl_decompress_mem_to_heap(constvoid*pSrc_buf,size_tsrc_buf_len,size_t*pOut_len,intflags)__attribute__((warning("miniz is compiled without malloc so this function does not work")));
// tinfl_decompress_mem_to_callback() decompresses a block in memory to an internal 32KB buffer, and a user provided callback function will be called to flush the buffer.
inttinfl_decompress_mem_to_callback(constvoid*pIn_buf,size_t*pIn_buf_size,tinfl_put_buf_func_ptrpPut_buf_func,void*pPut_buf_user,intflags)__attribute__((warning("miniz is compiled without malloc so this function does not work")));;
// Initializes the decompressor to its initial state.
#define tinfl_init(r) do { (r)->m_state = 0; } MZ_MACRO_END
#define tinfl_get_adler32(r) (r)->m_check_adler32
// Main low-level decompressor coroutine function. This is the only function actually needed for decompression. All the other functions are just high-level helpers for improved usability.
// This is a universal API, i.e. it can be used as a building block to build any desired higher level decompression API. In the limit case, it can be called once per every byte input or output.
// TDEFL_WRITE_ZLIB_HEADER: If set, the compressor outputs a zlib header before the deflate data, and the Adler-32 of the source data at the end. Otherwise, you'll get raw deflate data.
// TDEFL_COMPUTE_ADLER32: Always compute the adler-32 of the input data (even when not writing zlib headers).
// TDEFL_GREEDY_PARSING_FLAG: Set to use faster greedy parsing, instead of more efficient lazy parsing.
// TDEFL_NONDETERMINISTIC_PARSING_FLAG: Enable to decrease the compressor's initialization time to the minimum, but the output may vary from run to run given the same input (depending on the contents of memory).
// TDEFL_RLE_MATCHES: Only look for RLE matches (matches with a distance of 1)
// TDEFL_FILTER_MATCHES: Discards matches <= 5 chars if enabled.
// TDEFL_FORCE_ALL_STATIC_BLOCKS: Disable usage of optimized Huffman tables.
// TDEFL_FORCE_ALL_RAW_BLOCKS: Only use raw (uncompressed) deflate blocks.
// The low 12 bits are reserved to control the max # of hash probes per dictionary lookup (see TDEFL_MAX_PROBES_MASK).
enum
{
TDEFL_WRITE_ZLIB_HEADER=0x01000,
TDEFL_COMPUTE_ADLER32=0x02000,
TDEFL_GREEDY_PARSING_FLAG=0x04000,
TDEFL_NONDETERMINISTIC_PARSING_FLAG=0x08000,
TDEFL_RLE_MATCHES=0x10000,
TDEFL_FILTER_MATCHES=0x20000,
TDEFL_FORCE_ALL_STATIC_BLOCKS=0x40000,
TDEFL_FORCE_ALL_RAW_BLOCKS=0x80000
};
// High level compression functions:
// tdefl_compress_mem_to_heap() compresses a block in memory to a heap block allocated via malloc().
// On entry:
// pSrc_buf, src_buf_len: Pointer and size of source block to compress.
// flags: The max match finder probes (default is 128) logically OR'd against the above flags. Higher probes are slower but improve compression.
// On return:
// Function returns a pointer to the compressed data, or NULL on failure.
// *pOut_len will be set to the compressed data's size, which could be larger than src_buf_len on uncompressible data.
// The caller must free() the returned block when it's no longer needed.
// Note: Due to MINIZ_NO_MALLOC, this function will not work.
//
void*tdefl_compress_mem_to_heap(constvoid*pSrc_buf,size_tsrc_buf_len,size_t*pOut_len,intflags)__attribute__((warning("miniz is compiled without malloc so this function does not work")));;
// Note: Due to MINIZ_NO_MALLOC, this function will not work.
//
mz_booltdefl_compress_mem_to_output(constvoid*pBuf,size_tbuf_len,tdefl_put_buf_func_ptrpPut_buf_func,void*pPut_buf_user,intflags)__attribute__((warning("miniz is compiled without malloc so this function does not work")));;
// The low-level tdefl functions below may be used directly if the above helper functions aren't flexible enough. The low-level functions don't make any heap allocations, unlike the above helper functions.
typedefenum
{
TDEFL_STATUS_BAD_PARAM=-2,
TDEFL_STATUS_PUT_BUF_FAILED=-1,
TDEFL_STATUS_OKAY=0,
TDEFL_STATUS_DONE=1,
}tdefl_status;
// Must map to MZ_NO_FLUSH, MZ_SYNC_FLUSH, etc. enums
// There is no corresponding deinit() function because the tdefl API's do not dynamically allocate memory.
// pBut_buf_func: If NULL, output data will be supplied to the specified callback. In this case, the user should call the tdefl_compress_buffer() API for compression.
// If pBut_buf_func is NULL the user should always call the tdefl_compress() API.
// flags: See the above enums (TDEFL_HUFFMAN_ONLY, TDEFL_WRITE_ZLIB_HEADER, etc.)
// Compresses a block of data, consuming as much of the specified input buffer as possible, and writing as much compressed data to the specified output buffer as possible.
