esp-idf/components/esp_hw_support/sleep_gpio.c

202 lines
7.3 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stddef.h>
#include <string.h>
#include <sys/lock.h>
#include <sys/param.h>
#include "esp_attr.h"
#include "esp_sleep.h"
#include "esp_log.h"
#include "esp_memory_utils.h"
#include "soc/soc_caps.h"
#include "sdkconfig.h"
#include "driver/gpio.h"
#include "hal/gpio_hal.h"
#include "hal/rtc_io_hal.h"
#include "soc/rtc_io_periph.h"
2023-02-18 01:13:52 -05:00
#if SOC_LP_AON_SUPPORTED
#include "hal/lp_aon_hal.h"
#else
#include "hal/rtc_hal.h"
#endif
#include "esp_private/gpio.h"
#include "esp_private/sleep_gpio.h"
#include "esp_private/spi_flash_os.h"
#include "esp_private/startup_internal.h"
#include "bootloader_flash.h"
static const char *TAG = "sleep";
#if CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL
void gpio_sleep_mode_config_apply(void)
{
for (gpio_num_t gpio_num = GPIO_NUM_0; gpio_num < GPIO_NUM_MAX; gpio_num++) {
if (GPIO_IS_VALID_GPIO(gpio_num)) {
gpio_sleep_pupd_config_apply(gpio_num);
}
}
}
IRAM_ATTR void gpio_sleep_mode_config_unapply(void)
{
for (gpio_num_t gpio_num = GPIO_NUM_0; gpio_num < GPIO_NUM_MAX; gpio_num++) {
if (GPIO_IS_VALID_GPIO(gpio_num)) {
gpio_sleep_pupd_config_unapply(gpio_num);
}
}
}
#endif
void esp_sleep_config_gpio_isolate(void)
{
ESP_EARLY_LOGI(TAG, "Configure to isolate all GPIO pins in sleep state");
for (gpio_num_t gpio_num = GPIO_NUM_0; gpio_num < GPIO_NUM_MAX; gpio_num++) {
if (GPIO_IS_VALID_GPIO(gpio_num)) {
gpio_sleep_set_direction(gpio_num, GPIO_MODE_DISABLE);
gpio_sleep_set_pull_mode(gpio_num, GPIO_FLOATING);
}
}
#if CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND && CONFIG_SPIRAM
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_CS1), GPIO_PULLUP_ONLY);
#endif // CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND && CONFIG_SPIRAM
#if CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_CS0), GPIO_PULLUP_ONLY);
#endif // CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND
#if CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_CLK), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_Q), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_D), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_HD), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_WP), GPIO_PULLUP_ONLY);
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
bool octal_mspi_required = bootloader_flash_is_octal_mode_enabled();
#if CONFIG_SPIRAM_MODE_OCT
octal_mspi_required |= true;
#endif // CONFIG_SPIRAM_MODE_OCT
if (octal_mspi_required) {
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_DQS), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_D4), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_D5), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_D6), GPIO_PULLUP_ONLY);
gpio_sleep_set_pull_mode(esp_mspi_get_io(ESP_MSPI_IO_D7), GPIO_PULLUP_ONLY);
}
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
#endif // CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU
}
void esp_sleep_enable_gpio_switch(bool enable)
{
ESP_EARLY_LOGI(TAG, "%s automatic switching of GPIO sleep configuration", enable ? "Enable" : "Disable");
for (gpio_num_t gpio_num = GPIO_NUM_0; gpio_num < GPIO_NUM_MAX; gpio_num++) {
if (GPIO_IS_VALID_GPIO(gpio_num)) {
if (enable) {
gpio_sleep_sel_en(gpio_num);
} else {
gpio_sleep_sel_dis(gpio_num);
}
}
}
}
#if !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
IRAM_ATTR void esp_sleep_isolate_digital_gpio(void)
{
gpio_hal_context_t gpio_hal = {
.dev = GPIO_HAL_GET_HW(GPIO_PORT_0)
};
/* no need to do isolate if digital IOs are not being held in deep sleep */
if (!gpio_hal_deep_sleep_hold_is_en(&gpio_hal)) {
return;
}
/**
* there is a situation where we cannot isolate digital IO before deep sleep:
* - task stack is located in external ram(mspi ram), since we will isolate mspi io
*
* assert here instead of returning directly, because if digital IO is not isolated,
* the bottom current of deep sleep will be higher than light sleep, and there is no
* reason to use deep sleep at this time.
*/
assert(esp_ptr_internal(&gpio_hal) && "If hold digital IO, the stack of the task calling esp_deep_sleep_start must be in internal ram!");
/* isolate digital IO that is not held(keep the configuration of digital IOs held by users) */
for (gpio_num_t gpio_num = GPIO_NUM_0; gpio_num < GPIO_NUM_MAX; gpio_num++) {
if (GPIO_IS_VALID_DIGITAL_IO_PAD(gpio_num) && !gpio_hal_is_digital_io_hold(&gpio_hal, gpio_num)) {
/* disable I/O */
gpio_hal_input_disable(&gpio_hal, gpio_num);
gpio_hal_output_disable(&gpio_hal, gpio_num);
/* disable pull up/down */
gpio_hal_pullup_dis(&gpio_hal, gpio_num);
gpio_hal_pulldown_dis(&gpio_hal, gpio_num);
/* make pad work as gpio(otherwise, deep sleep bottom current will rise) */
gpio_hal_func_sel(&gpio_hal, gpio_num, PIN_FUNC_GPIO);
}
}
}
2023-02-18 01:13:52 -05:00
#endif // !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
void esp_deep_sleep_wakeup_io_reset(void)
{
2023-02-18 01:13:52 -05:00
#if SOC_PM_SUPPORT_EXT1_WAKEUP
uint32_t rtc_io_mask = rtc_hal_ext1_get_wakeup_pins();
// Disable ext1 wakeup before releasing hold, such that wakeup status can reflect the correct wakeup pin
rtc_hal_ext1_clear_wakeup_pins();
for (int gpio_num = 0; gpio_num < SOC_GPIO_PIN_COUNT && rtc_io_mask != 0; ++gpio_num) {
int rtcio_num = rtc_io_num_map[gpio_num];
if ((rtc_io_mask & BIT(rtcio_num)) == 0) {
continue;
}
rtcio_hal_hold_disable(rtcio_num);
rtc_io_mask &= ~BIT(rtcio_num);
}
#endif
#if SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
uint32_t dl_io_mask = SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK;
gpio_hal_context_t gpio_hal = {
.dev = GPIO_HAL_GET_HW(GPIO_PORT_0)
};
while (dl_io_mask) {
int gpio_num = __builtin_ffs(dl_io_mask) - 1;
bool wakeup_io_enabled = gpio_hal_deepsleep_wakeup_is_enabled(&gpio_hal, gpio_num);
if (wakeup_io_enabled) {
// Disable the wakeup before releasing hold, such that wakeup status can reflect the correct wakeup pin
gpio_hal_deepsleep_wakeup_disable(&gpio_hal, gpio_num);
gpio_hal_hold_dis(&gpio_hal, gpio_num);
}
dl_io_mask &= ~BIT(gpio_num);
}
#endif
}
#if CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND || CONFIG_PM_SLP_DISABLE_GPIO
ESP_SYSTEM_INIT_FN(esp_sleep_startup_init, SECONDARY, BIT(0), 105)
{
/* If the TOP domain is powered off, the GPIO will also be powered off during sleep,
and all configurations in the sleep state of GPIO will not take effect.*/
#if !CONFIG_PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
// Configure to isolate (disable the Input/Output/Pullup/Pulldown
// function of the pin) all GPIO pins in sleep state
esp_sleep_config_gpio_isolate();
#endif
// Enable automatic switching of GPIO configuration
esp_sleep_enable_gpio_switch(true);
return ESP_OK;
}
#endif