esp-idf/components/freemodbus/modbus/include/mbframe.h

96 lines
4.0 KiB
C
Raw Normal View History

/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_FRAME_H
#define _MB_FRAME_H
#include "port.h"
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/*!
* Constants which defines the format of a modbus frame. The example is
* shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not
* dependent on the underlying transport.
*
* <code>
* <------------------------ MODBUS SERIAL LINE PDU (1) ------------------->
* <----------- MODBUS PDU (1') ---------------->
* +-----------+---------------+----------------------------+-------------+
* | Address | Function Code | Data | CRC/LRC |
* +-----------+---------------+----------------------------+-------------+
* | | | |
* (2) (3/2') (3') (4)
*
* (1) ... MB_SER_PDU_SIZE_MAX = 256
* (2) ... MB_SER_PDU_ADDR_OFF = 0
* (3) ... MB_SER_PDU_PDU_OFF = 1
* (4) ... MB_SER_PDU_SIZE_CRC = 2
*
* (1') ... MB_PDU_SIZE_MAX = 253
* (2') ... MB_PDU_FUNC_OFF = 0
* (3') ... MB_PDU_DATA_OFF = 1
* </code>
*/
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_SIZE_MAX ( 253 ) /*!< Maximum size of a PDU. */
#define MB_PDU_SIZE_MIN 1 /*!< Function Code */
#define MB_PDU_FUNC_OFF 0 /*!< Offset of function code in PDU. */
#define MB_PDU_DATA_OFF 1 /*!< Offset for response data in PDU. */
#define MB_SER_PDU_SIZE_MAX ( MB_SERIAL_BUF_SIZE ) /*!< Maximum size of a Modbus frame. */
#define MB_SER_PDU_SIZE_LRC 1 /*!< Size of LRC field in PDU. */
#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */
/* ----------------------- Prototypes 0-------------------------------------*/
typedef void ( *pvMBFrameStart ) ( void );
typedef void ( *pvMBFrameStop ) ( void );
typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress,
UCHAR ** pucFrame,
USHORT * pusLength );
typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress,
const UCHAR * pucFrame,
USHORT usLength );
typedef void( *pvMBFrameClose ) ( void );
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif