2020-07-26 15:13:07 -04:00
|
|
|
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
//
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <sys/param.h> // For MIN/MAX
|
|
|
|
#include "esp_log.h"
|
|
|
|
#include "spi_flash_chip_generic.h"
|
|
|
|
#include "spi_flash_defs.h"
|
|
|
|
|
|
|
|
|
|
|
|
#define REGION_32BIT(start, len) ((start) + (len) > (1<<24))
|
|
|
|
#define ADDR_32BIT(addr) (addr >= (1<<24))
|
|
|
|
|
|
|
|
|
|
|
|
static const char TAG[] = "chip_wb";
|
|
|
|
|
|
|
|
/* Driver for Winbond flash chip */
|
|
|
|
static esp_err_t spi_flash_command_winbond_program_4B(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length);
|
|
|
|
static esp_err_t spi_flash_command_winbond_erase_sector_4B(esp_flash_t *chip, uint32_t start_address);
|
|
|
|
static esp_err_t spi_flash_command_erase_block_4B(esp_flash_t *chip, uint32_t start_address);
|
|
|
|
|
|
|
|
esp_err_t spi_flash_chip_winbond_probe(esp_flash_t *chip, uint32_t flash_id)
|
|
|
|
{
|
|
|
|
/* Check manufacturer and product IDs match our desired masks */
|
|
|
|
const uint8_t MFG_ID = 0xEF;
|
|
|
|
if (flash_id >> 16 != MFG_ID) {
|
|
|
|
return ESP_ERR_NOT_FOUND;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ESP_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t spi_flash_chip_winbond_read(esp_flash_t *chip, void *buffer, uint32_t address, uint32_t length)
|
|
|
|
{
|
|
|
|
esp_err_t err = ESP_OK;
|
|
|
|
const uint32_t page_size = chip->chip_drv->page_size;
|
|
|
|
uint32_t align_address;
|
|
|
|
uint8_t temp_buffer[64]; //spiflash hal max length of read no longer than 64byte
|
|
|
|
|
|
|
|
// Configure the host, and return
|
|
|
|
err = spi_flash_chip_generic_config_host_io_mode(chip, REGION_32BIT(address, length));
|
|
|
|
|
|
|
|
if (err == ESP_ERR_NOT_SUPPORTED) {
|
|
|
|
ESP_LOGE(TAG, "configure host io mode failed - unsupported");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (err == ESP_OK && length > 0) {
|
|
|
|
memset(temp_buffer, 0xFF, sizeof(temp_buffer));
|
|
|
|
uint32_t read_len = chip->host->driver->read_data_slicer(chip->host, address, length, &align_address, page_size);
|
|
|
|
uint32_t left_off = address - align_address;
|
|
|
|
uint32_t data_len = MIN(align_address + read_len, address + length) - address;
|
|
|
|
err = chip->host->driver->read(chip->host, temp_buffer, align_address, read_len);
|
|
|
|
|
|
|
|
memcpy(buffer, temp_buffer + left_off, data_len);
|
|
|
|
|
|
|
|
address += data_len;
|
|
|
|
buffer = (void *)((intptr_t)buffer + data_len);
|
|
|
|
length = length - data_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t spi_flash_chip_winbond_page_program(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
|
|
{
|
|
|
|
esp_err_t err;
|
|
|
|
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
|
|
|
|
|
|
if (err == ESP_OK) {
|
|
|
|
// Perform the actual Page Program command
|
|
|
|
err = spi_flash_command_winbond_program_4B(chip, buffer, address, length);
|
|
|
|
if (err != ESP_OK) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->page_program_timeout);
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t spi_flash_chip_winbond_erase_sector(esp_flash_t *chip, uint32_t start_address)
|
|
|
|
{
|
|
|
|
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
|
|
if (err == ESP_OK) {
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (err == ESP_OK) {
|
|
|
|
err = spi_flash_command_winbond_erase_sector_4B(chip, start_address);
|
|
|
|
if (err != ESP_OK) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
//to save time, flush cache here
|
|
|
|
if (chip->host->driver->flush_cache) {
|
|
|
|
err = chip->host->driver->flush_cache(chip->host, start_address, chip->chip_drv->sector_size);
|
|
|
|
if (err != ESP_OK) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->sector_erase_timeout);
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t spi_flash_chip_winbond_erase_block(esp_flash_t *chip, uint32_t start_address)
|
|
|
|
{
|
|
|
|
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
|
|
if (err == ESP_OK) {
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (err == ESP_OK) {
|
|
|
|
err = spi_flash_command_erase_block_4B(chip, start_address);
|
|
|
|
if (err != ESP_OK) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
//to save time, flush cache here
|
|
|
|
if (chip->host->driver->flush_cache) {
|
|
|
|
err = chip->host->driver->flush_cache(chip->host, start_address, chip->chip_drv->block_erase_size);
|
|
|
|
if (err != ESP_OK) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->block_erase_timeout);
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const char chip_name[] = "winbond";
|
|
|
|
|
|
|
|
// The issi chip can use the functions for generic chips except from set read mode and probe,
|
|
|
|
// So we only replace these two functions.
|
|
|
|
const spi_flash_chip_t esp_flash_chip_winbond = {
|
|
|
|
.name = chip_name,
|
|
|
|
.timeout = &spi_flash_chip_generic_timeout,
|
|
|
|
.probe = spi_flash_chip_winbond_probe,
|
|
|
|
.reset = spi_flash_chip_generic_reset,
|
|
|
|
.detect_size = spi_flash_chip_generic_detect_size,
|
|
|
|
.erase_chip = spi_flash_chip_generic_erase_chip,
|
|
|
|
.erase_sector = spi_flash_chip_winbond_erase_sector,
|
|
|
|
.erase_block = spi_flash_chip_winbond_erase_block,
|
|
|
|
.sector_size = 4 * 1024,
|
|
|
|
.block_erase_size = 64 * 1024,
|
|
|
|
|
|
|
|
.get_chip_write_protect = spi_flash_chip_generic_get_write_protect,
|
|
|
|
.set_chip_write_protect = spi_flash_chip_generic_set_write_protect,
|
|
|
|
|
|
|
|
.num_protectable_regions = 0,
|
|
|
|
.protectable_regions = NULL,
|
|
|
|
.get_protected_regions = NULL,
|
|
|
|
.set_protected_regions = NULL,
|
|
|
|
|
|
|
|
.read = spi_flash_chip_winbond_read,
|
|
|
|
.write = spi_flash_chip_generic_write,
|
|
|
|
.program_page = spi_flash_chip_winbond_page_program,
|
|
|
|
.page_size = 256,
|
|
|
|
.write_encrypted = spi_flash_chip_generic_write_encrypted,
|
|
|
|
|
|
|
|
.wait_idle = spi_flash_chip_generic_wait_idle,
|
|
|
|
.set_io_mode = spi_flash_chip_generic_set_io_mode,
|
|
|
|
.get_io_mode = spi_flash_chip_generic_get_io_mode,
|
|
|
|
|
|
|
|
.read_reg = spi_flash_chip_generic_read_reg,
|
2020-12-15 22:50:13 -05:00
|
|
|
.yield = spi_flash_chip_generic_yield,
|
2020-12-17 23:57:55 -05:00
|
|
|
.sus_setup = spi_flash_chip_generic_suspend_cmd_conf,
|
2020-11-27 06:09:40 -05:00
|
|
|
.read_unique_id = spi_flash_chip_generic_read_unique_id,
|
2020-07-26 15:13:07 -04:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static esp_err_t spi_flash_command_winbond_program_4B(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
|
|
{
|
|
|
|
bool addr_4b = ADDR_32BIT(address);
|
|
|
|
spi_flash_trans_t t = {
|
|
|
|
.command = (addr_4b? CMD_PROGRAM_PAGE_4B: CMD_PROGRAM_PAGE),
|
|
|
|
.address_bitlen = (addr_4b? 32: 24),
|
|
|
|
.address = address,
|
|
|
|
.mosi_len = length,
|
|
|
|
.mosi_data = buffer,
|
|
|
|
};
|
|
|
|
return chip->host->driver->common_command(chip->host, &t);
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t spi_flash_command_winbond_erase_sector_4B(esp_flash_t *chip, uint32_t start_address)
|
|
|
|
{
|
|
|
|
bool addr_4b = ADDR_32BIT(start_address);
|
|
|
|
spi_flash_trans_t t = {
|
|
|
|
.command = (addr_4b? CMD_SECTOR_ERASE_4B: CMD_SECTOR_ERASE),
|
|
|
|
.address_bitlen = (addr_4b? 32: 24),
|
|
|
|
.address = start_address,
|
|
|
|
};
|
|
|
|
return chip->host->driver->common_command(chip->host, &t);
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t spi_flash_command_erase_block_4B(esp_flash_t *chip, uint32_t start_address)
|
|
|
|
{
|
|
|
|
bool addr_4b = ADDR_32BIT(start_address);
|
|
|
|
spi_flash_trans_t t = {
|
|
|
|
.command = (addr_4b? CMD_LARGE_BLOCK_ERASE_4B: CMD_LARGE_BLOCK_ERASE),
|
|
|
|
.address_bitlen = (addr_4b? 32: 24),
|
|
|
|
.address = start_address,
|
|
|
|
};
|
|
|
|
return chip->host->driver->common_command(chip->host, &t);
|
2020-11-10 02:40:01 -05:00
|
|
|
}
|