2023-01-09 07:58:27 -05:00
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
2022-05-20 05:50:08 -04:00
2021-10-28 13:01:43 -04:00
# WPA2 Enterprise Example
This example shows how ESP32 connects to AP with Wi-Fi enterprise encryption using the EAP-FAST method. The example does the following steps:
1. Install CA certificate which is optional.
2. Set user name and password and identity.
3. Set the PAC file which may be empty.
2023-08-07 06:13:43 -04:00
4. Enable WiFi enterprise mode.
2021-10-28 13:01:43 -04:00
5. Connect to AP.
2023-08-07 06:13:43 -04:00
*Note:*
1. EAP-FAST is not supported with `CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT` and so is disabled by default.
2. Setting the config `fast_provisioning` to methods 0 and 1 do not support saving the PAC credentials in case of a restart or loss of power.
3. The certificates present in the `examples/wifi/wifi_eap_fast/main` folder contain server certificates which have the corresponding CA as well. These can be used for server validation which is opptional.
4. The expiration date of these certificates is 2027/06/05.
2021-10-28 13:01:43 -04:00
### Configuration
```
idf.py menuconfig
```
* Set SSID of Access Point to connect in Example Configuration.
* Enter EAP-ID.
* Enter Username and Password.
* Enable or disable Validate Server option.
### Build and Flash the project.
```
idf.py -p PORT flash monitor
```
### Example output
Here is an example of wpa2 enterprise (FAST method) console output.
```
I (690) example: Setting WiFi configuration SSID wpa2_test...
I (690) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
I (800) wifi:mode : sta (24:6f:28:80:41:78)
I (800) wifi:enable tsf
I (1410) wifi:new:< 6 , 0 > , old:< 1 , 0 > , ap:< 255 , 255 > , sta:< 6 , 0 > , prof:1
I (2410) wifi:state: init -> auth (b0)
I (2420) wifi:state: auth -> assoc (0)
E (2420) wifi:Association refused temporarily, comeback time 3072 mSec
I (5500) wifi:state: assoc -> assoc (0)
I (5500) wifi:state: assoc -> init (6c0)
I (5500) wifi:new:< 6 , 0 > , old:< 6 , 0 > , ap:< 255 , 255 > , sta:< 6 , 0 > , prof:1
I (7560) wifi:new:< 6 , 0 > , old:< 6 , 0 > , ap:< 255 , 255 > , sta:< 6 , 0 > , prof:1
I (7560) wifi:state: init -> auth (b0)
I (7560) wifi:state: auth -> assoc (0)
I (7570) wifi:state: assoc -> run (10)
I (7770) wifi:connected with wpa2_test, aid = 1, channel 6, BW20, bssid = 24:4b:fe:ab:be:99
I (7770) wifi:security: WPA2-ENT, phy: bg, rssi: -80
I (7780) wifi:pm start, type: 1
I (7800) example: ~~~~~~~~~~~
I (7800) example: IP:0.0.0.0
I (7800) example: MASK:0.0.0.0
I (7800) example: GW:0.0.0.0
I (7800) example: ~~~~~~~~~~~
I (7870) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (8580) esp_netif_handlers: sta ip: 192.168.5.3, mask: 255.255.255.0, gw: 192.168.5.1
I (12800) example: ~~~~~~~~~~~
I (12800) example: IP:192.168.5.3
I (12800) example: MASK:255.255.255.0
I (12800) example: GW:192.168.5.1
I (12800) example: ~~~~~~~~~~~
```
