esp-idf/examples/ethernet/enc28j60/components/eth_enc28j60/esp_eth_enc28j60.h

105 lines
2.5 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_eth_phy.h"
#include "esp_eth_mac.h"
#include "driver/spi_master.h"
#define CS_HOLD_TIME_MIN_NS 210
/**
* @brief ENC28J60 specific configuration
*
*/
typedef struct {
spi_device_handle_t spi_hdl; /*!< Handle of SPI device driver */
int int_gpio_num; /*!< Interrupt GPIO number */
} eth_enc28j60_config_t;
/**
* @brief ENC28J60 Supported Revisions
*
*/
typedef enum {
ENC28J60_REV_B1 = 0b00000010,
ENC28J60_REV_B4 = 0b00000100,
ENC28J60_REV_B5 = 0b00000101,
ENC28J60_REV_B7 = 0b00000110
} eth_enc28j60_rev_t;
/**
* @brief Default ENC28J60 specific configuration
*
*/
#define ETH_ENC28J60_DEFAULT_CONFIG(spi_device) \
{ \
.spi_hdl = spi_device, \
.int_gpio_num = 4, \
}
/**
* @brief Compute amount of SPI bit-cycles the CS should stay active after the transmission
* to meet ENC28J60 CS Hold Time specification.
*
* @param clock_speed_mhz SPI Clock frequency in MHz (valid range is <1, 20>)
* @return uint8_t
*/
static inline uint8_t enc28j60_cal_spi_cs_hold_time(int clock_speed_mhz)
{
if (clock_speed_mhz <= 0 || clock_speed_mhz > 20) {
return 0;
}
int temp = clock_speed_mhz * CS_HOLD_TIME_MIN_NS;
uint8_t cs_posttrans = temp / 1000;
if (temp % 1000) {
cs_posttrans += 1;
}
return cs_posttrans;
}
/**
* @brief Create ENC28J60 Ethernet MAC instance
*
* @param[in] enc28j60_config: ENC28J60 specific configuration
* @param[in] mac_config: Ethernet MAC configuration
*
* @return
* - instance: create MAC instance successfully
* - NULL: create MAC instance failed because some error occurred
*/
esp_eth_mac_t *esp_eth_mac_new_enc28j60(const eth_enc28j60_config_t *enc28j60_config, const eth_mac_config_t *mac_config);
/**
* @brief Create a PHY instance of ENC28J60
*
* @param[in] config: configuration of PHY
*
* @return
* - instance: create PHY instance successfully
* - NULL: create PHY instance failed because some error occurred
*/
esp_eth_phy_t *esp_eth_phy_new_enc28j60(const eth_phy_config_t *config);
/**
* @brief Get ENC28J60 silicon revision ID
*
* @param mac ENC28J60 MAC Handle
* @return eth_enc28j60_rev_t
* - returns silicon revision ID read during initialization
*/
eth_enc28j60_rev_t emac_enc28j60_get_chip_info(esp_eth_mac_t *mac);
#ifdef __cplusplus
}
#endif