esp-idf/components/esp32/test/test_reset_reason.c

303 lines
9.6 KiB
C
Raw Normal View History

#include "unity.h"
#include "esp_system.h"
#include "esp_task_wdt.h"
#include "esp_attr.h"
#include "soc/rtc_cntl_reg.h"
#include "driver/timer.h"
#include "rom/rtc.h"
#define RTC_BSS_ATTR __attribute__((section(".rtc.bss")))
#define CHECK_VALUE 0x89abcdef
static __NOINIT_ATTR uint32_t s_noinit_val;
static RTC_NOINIT_ATTR uint32_t s_rtc_noinit_val;
static RTC_DATA_ATTR uint32_t s_rtc_data_val;
static RTC_BSS_ATTR uint32_t s_rtc_bss_val;
/* There is no practical difference between placing something into RTC_DATA and
* RTC_RODATA. This only checks a usage pattern where the variable has a non-zero
* initializer (should be initialized by the bootloader).
*/
static RTC_RODATA_ATTR uint32_t s_rtc_rodata_val = CHECK_VALUE;
static RTC_FAST_ATTR uint32_t s_rtc_force_fast_val;
static RTC_SLOW_ATTR uint32_t s_rtc_force_slow_val;
static void setup_values()
{
s_noinit_val = CHECK_VALUE;
s_rtc_noinit_val = CHECK_VALUE;
s_rtc_data_val = CHECK_VALUE;
s_rtc_bss_val = CHECK_VALUE;
TEST_ASSERT_EQUAL_HEX32_MESSAGE(CHECK_VALUE, s_rtc_rodata_val,
"s_rtc_rodata_val should already be set up");
s_rtc_force_fast_val = CHECK_VALUE;
s_rtc_force_slow_val = CHECK_VALUE;
}
/* This test needs special test runners: rev1 silicon, and SPI flash with
* fast start-up time. Otherwise reset reason will be RTCWDT_RESET.
*/
TEST_CASE("reset reason ESP_RST_POWERON", "[reset][ignore]")
{
TEST_ASSERT_EQUAL(ESP_RST_POWERON, esp_reset_reason());
}
static void do_deep_sleep()
{
setup_values();
esp_sleep_enable_timer_wakeup(10000);
esp_deep_sleep_start();
}
static void check_reset_reason_deep_sleep()
{
TEST_ASSERT_EQUAL(ESP_RST_DEEPSLEEP, esp_reset_reason());
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_noinit_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_data_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_bss_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_rodata_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_force_fast_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_force_slow_val);
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_DEEPSLEEP", "[reset_reason][reset=DEEPSLEEP_RESET]",
do_deep_sleep,
check_reset_reason_deep_sleep);
static void do_exception()
{
setup_values();
*(int*) (0x40000001) = 0;
}
static void do_abort()
{
setup_values();
abort();
}
static void check_reset_reason_panic()
{
TEST_ASSERT_EQUAL(ESP_RST_PANIC, esp_reset_reason());
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_noinit_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_noinit_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_data_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_bss_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_rodata_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_fast_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_slow_val);
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_PANIC after exception", "[reset_reason][reset=LoadStoreError,SW_CPU_RESET]",
do_exception,
check_reset_reason_panic);
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_PANIC after abort", "[reset_reason][reset=abort,SW_CPU_RESET]",
do_abort,
check_reset_reason_panic);
static void do_restart()
{
setup_values();
esp_restart();
}
#if portNUM_PROCESSORS > 1
static void do_restart_from_app_cpu()
{
setup_values();
xTaskCreatePinnedToCore((TaskFunction_t) &do_restart, "restart", 2048, NULL, 5, NULL, 1);
vTaskDelay(2);
}
#endif
static void check_reset_reason_sw()
{
TEST_ASSERT_EQUAL(ESP_RST_SW, esp_reset_reason());
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_noinit_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_noinit_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_data_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_bss_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_rodata_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_fast_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_slow_val);
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_SW after restart", "[reset_reason][reset=SW_CPU_RESET]",
do_restart,
check_reset_reason_sw);
#if portNUM_PROCESSORS > 1
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_SW after restart from APP CPU", "[reset_reason][reset=SW_CPU_RESET]",
do_restart_from_app_cpu,
check_reset_reason_sw);
#endif
static void do_int_wdt()
{
portENTER_CRITICAL_NESTED();
while(1);
}
static void do_int_wdt_hw()
{
XTOS_SET_INTLEVEL(XCHAL_NMILEVEL);
while(1);
}
static void check_reset_reason_int_wdt()
{
TEST_ASSERT_EQUAL(ESP_RST_INT_WDT, esp_reset_reason());
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_INT_WDT after interrupt watchdog (panic)",
"[reset_reason][reset=Interrupt wdt timeout on CPU0,SW_CPU_RESET]",
do_int_wdt,
check_reset_reason_int_wdt);
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_INT_WDT after interrupt watchdog (hw)",
"[reset_reason][reset=TG1WDT_SYS_RESET]",
do_int_wdt_hw,
check_reset_reason_int_wdt);
static void do_task_wdt()
{
setup_values();
esp_task_wdt_init(1, true);
esp_task_wdt_add(xTaskGetIdleTaskHandleForCPU(0));
while(1);
}
static void check_reset_reason_task_wdt()
{
TEST_ASSERT_EQUAL(ESP_RST_TASK_WDT, esp_reset_reason());
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_noinit_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_noinit_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_data_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_bss_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_rodata_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_fast_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_slow_val);
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_TASK_WDT after task watchdog",
"[reset_reason][reset=abort,SW_CPU_RESET]",
do_task_wdt,
check_reset_reason_task_wdt);
static void do_rtc_wdt()
{
WRITE_PERI_REG(RTC_CNTL_WDTWPROTECT_REG, RTC_CNTL_WDT_WKEY_VALUE);
REG_SET_FIELD(RTC_CNTL_WDTCONFIG0_REG, RTC_CNTL_WDT_SYS_RESET_LENGTH, 7);
REG_SET_FIELD(RTC_CNTL_WDTCONFIG0_REG, RTC_CNTL_WDT_STG0, RTC_WDT_STG_SEL_RESET_SYSTEM);
WRITE_PERI_REG(RTC_CNTL_WDTCONFIG1_REG, 10000);
REG_SET_BIT(RTC_CNTL_WDTCONFIG0_REG, RTC_CNTL_WDT_FLASHBOOT_MOD_EN);
while(1);
}
static void check_reset_reason_any_wdt()
{
TEST_ASSERT_EQUAL(ESP_RST_WDT, esp_reset_reason());
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_WDT after RTC watchdog",
"[reset_reason][reset=RTCWDT_RTC_RESET]",
do_rtc_wdt,
check_reset_reason_any_wdt);
static void do_brownout()
{
setup_values();
printf("Manual test: lower the supply voltage to cause brownout\n");
vTaskSuspend(NULL);
}
static void check_reset_reason_brownout()
{
TEST_ASSERT_EQUAL(ESP_RST_BROWNOUT, esp_reset_reason());
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_noinit_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_noinit_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_data_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_bss_val);
TEST_ASSERT_EQUAL_HEX32(CHECK_VALUE, s_rtc_rodata_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_fast_val);
TEST_ASSERT_EQUAL_HEX32(0, s_rtc_force_slow_val);
}
TEST_CASE_MULTIPLE_STAGES("reset reason ESP_RST_BROWNOUT after brownout event",
"[reset_reason][ignore][reset=SW_CPU_RESET]",
do_brownout,
check_reset_reason_brownout);
// The following test cases are used to check if the timer_group fix works.
// Some applications use a software reset, at the reset time, timer_group happens to generate an interrupt.
// but software reset does not clear interrupt status, this is not safe for application when enable the interrupt of timer_group.
// This case will check under this fix, whether the interrupt status is cleared after timer_group initialization.
static void timer_group_test_init(void)
{
static const uint32_t time_ms = 100; //Alarm value 100ms.
static const uint16_t timer_div = 10; //Timer prescaler
static const uint32_t ste_val = time_ms * (TIMER_BASE_CLK / timer_div / 1000);
timer_config_t config = {
.divider = timer_div,
.counter_dir = TIMER_COUNT_UP,
.counter_en = TIMER_PAUSE,
.alarm_en = TIMER_ALARM_EN,
.intr_type = TIMER_INTR_LEVEL,
.auto_reload = true,
};
timer_init(TIMER_GROUP_0, TIMER_0, &config);
timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0x00000000ULL);
timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, ste_val);
//Now the timer is ready.
//We only need to check the interrupt status and don't have to register a interrupt routine.
}
static void timer_group_test_first_stage(void)
{
RESET_REASON rst_res = rtc_get_reset_reason(0);
if(rst_res != POWERON_RESET){
printf("Not power on reset\n");
}
TEST_ASSERT_EQUAL(POWERON_RESET, rst_res);
static uint8_t loop_cnt = 0;
timer_group_test_init();
//Start timer
timer_start(TIMER_GROUP_0, TIMER_0);
//Waiting for timer_group to generate an interrupt
while( !TIMERG0.int_raw.t0 && loop_cnt++ < 100) {
vTaskDelay(200);
}
//TIMERG0.int_raw.t0 == 1 means an interruption has occurred
TEST_ASSERT_EQUAL(1, TIMERG0.int_raw.t0);
esp_restart();
}
static void timer_group_test_second_stage(void)
{
RESET_REASON rst_res = rtc_get_reset_reason(0);
if(rst_res != SW_CPU_RESET){
printf("Not software reset\n");
}
TEST_ASSERT_EQUAL(SW_CPU_RESET, rst_res);
timer_group_test_init();
//After the timer_group is initialized, TIMERG0.int_raw.t0 should be cleared.
TEST_ASSERT_EQUAL(0, TIMERG0.int_raw.t0);
}
TEST_CASE_MULTIPLE_STAGES("timer_group software reset test",
"[intr_status][intr_status = 0]",
timer_group_test_first_stage,
timer_group_test_second_stage);
/* Not tested here: ESP_RST_SDIO */