esp-idf/components/esp_common/Kconfig

menu "Common ESP-related"

    config ESP_ERR_TO_NAME_LOOKUP
        bool "Enable lookup of error code strings"
        default "y"
        help
            Functions esp_err_to_name() and esp_err_to_name_r() return string representations of error codes from a
            pre-generated lookup table. This option can be used to turn off the use of the look-up table in order to
            save memory but this comes at the price of sacrificing distinguishable (meaningful) output string
            representations.

    config ESP_SYSTEM_EVENT_QUEUE_SIZE
        int "System event queue size"
        default 32
        help
            Config system event queue size in different application.

    config ESP_SYSTEM_EVENT_TASK_STACK_SIZE
        int "Event loop task stack size"
        default 2304
        help
            Config system event task stack size in different application.

    config ESP_MAIN_TASK_STACK_SIZE
        int "Main task stack size"
        default 3584
        help
            Configure the "main task" stack size. This is the stack of the task
            which calls app_main(). If app_main() returns then this task is deleted
            and its stack memory is freed.

    config ESP_IPC_TASK_STACK_SIZE
        int "Inter-Processor Call (IPC) task stack size"
        range 512 65536 if !APPTRACE_ENABLE
        range 2048 65536 if APPTRACE_ENABLE
        default 2048 if APPTRACE_ENABLE
        default 1024
        help
            Configure the IPC tasks stack size. One IPC task runs on each core
            (in dual core mode), and allows for cross-core function calls.

            See IPC documentation for more details.

            The default stack size should be enough for most common use cases.
            It can be shrunk if you are sure that you do not use any custom
            IPC functionality.

    config ESP_IPC_USES_CALLERS_PRIORITY
        bool "IPC runs at caller's priority"
        default y
        depends on !FREERTOS_UNICORE
        help
            If this option is not enabled then the IPC task will keep behavior
            same as prior to that of ESP-IDF v4.0, and hence IPC task will run
            at (configMAX_PRIORITIES - 1) priority.

    config ESP_MINIMAL_SHARED_STACK_SIZE
        int "Minimal allowed size for shared stack"
        default 2048
        help
            Minimal value of size, in bytes, accepted to execute a expression
            with shared stack.

    choice ESP_CONSOLE_UART
        prompt "UART for console output"
        default ESP_CONSOLE_UART_DEFAULT
        help
            Select whether to use UART for console output (through stdout and stderr).

            - Default is to use UART0 on pre-defined GPIOs.
            - If "Custom" is selected, UART0 or UART1 can be chosen,
              and any pins can be selected.
            - If "None" is selected, there will be no console output on any UART, except
              for initial output from ROM bootloader. This output can be further suppressed by
              bootstrapping GPIO13 pin to low logic level.

        config ESP_CONSOLE_UART_DEFAULT
            bool "Default: UART0"
        config ESP_CONSOLE_UART_CUSTOM
            bool "Custom"
        config ESP_CONSOLE_UART_NONE
            bool "None"
    endchoice

    choice ESP_CONSOLE_UART_NUM
        prompt "UART peripheral to use for console output (0-1)"
        depends on ESP_CONSOLE_UART_CUSTOM
        default ESP_CONSOLE_UART_CUSTOM_NUM_0
        help
            Due of a ROM bug, UART2 is not supported for console output
            via ets_printf.

        config ESP_CONSOLE_UART_CUSTOM_NUM_0
            bool "UART0"
        config ESP_CONSOLE_UART_CUSTOM_NUM_1
            bool "UART1"
    endchoice

    config ESP_CONSOLE_UART_NUM
        int
        default 0 if ESP_CONSOLE_UART_DEFAULT || ESP_CONSOLE_UART_NONE
        default 0 if ESP_CONSOLE_UART_CUSTOM_NUM_0
        default 1 if ESP_CONSOLE_UART_CUSTOM_NUM_1

    config ESP_CONSOLE_UART_TX_GPIO
        int "UART TX on GPIO#"
        range 0 46
        default 1 if IDF_TARGET_ESP32
        default 43 if IDF_TARGET_ESP32S2

    config ESP_CONSOLE_UART_RX_GPIO
        int "UART RX on GPIO#"
        range 0 46
        default 3 if IDF_TARGET_ESP32
        default 44 if IDF_TARGET_ESP32S2

    config ESP_CONSOLE_UART_BAUDRATE
        int "UART console baud rate"
        depends on !ESP_CONSOLE_UART_NONE
        default 115200
        range 1200 4000000


    config ESP_INT_WDT
        bool "Interrupt watchdog"
        default y
        help
            This watchdog timer can detect if the FreeRTOS tick interrupt has not been called for a certain time,
            either because a task turned off interrupts and did not turn them on for a long time, or because an
            interrupt handler did not return. It will try to invoke the panic handler first and failing that
            reset the SoC.

    config ESP_INT_WDT_TIMEOUT_MS
        int "Interrupt watchdog timeout (ms)"
        depends on ESP_INT_WDT
        default 300 if !ESP32_SPIRAM_SUPPORT
        default 800 if ESP32_SPIRAM_SUPPORT
        range 10 10000
        help
            The timeout of the watchdog, in miliseconds. Make this higher than the FreeRTOS tick rate.

    config ESP_INT_WDT_CHECK_CPU1
        bool "Also watch CPU1 tick interrupt"
        depends on ESP_INT_WDT && !FREERTOS_UNICORE
        default y
        help
            Also detect if interrupts on CPU 1 are disabled for too long.

    config ESP_TASK_WDT
        bool "Initialize Task Watchdog Timer on startup"
        default y
        help
            The Task Watchdog Timer can be used to make sure individual tasks are still
            running. Enabling this option will cause the Task Watchdog Timer to be
            initialized automatically at startup. The Task Watchdog timer can be
            initialized after startup as well (see Task Watchdog Timer API Reference)

    config ESP_TASK_WDT_PANIC
        bool "Invoke panic handler on Task Watchdog timeout"
        depends on ESP_TASK_WDT
        default n
        help
            If this option is enabled, the Task Watchdog Timer will be configured to
            trigger the panic handler when it times out. This can also be configured
            at run time (see Task Watchdog Timer API Reference)

    config ESP_TASK_WDT_TIMEOUT_S
        int "Task Watchdog timeout period (seconds)"
        depends on ESP_TASK_WDT
        range 1 60
        default 5
        help
            Timeout period configuration for the Task Watchdog Timer in seconds.
            This is also configurable at run time (see Task Watchdog Timer API Reference)

    config ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0
        bool "Watch CPU0 Idle Task"
        depends on ESP_TASK_WDT
        default y
        help
            If this option is enabled, the Task Watchdog Timer will watch the CPU0
            Idle Task. Having the Task Watchdog watch the Idle Task allows for detection
            of CPU starvation as the Idle Task not being called is usually a symptom of
            CPU starvation. Starvation of the Idle Task is detrimental as FreeRTOS household
            tasks depend on the Idle Task getting some runtime every now and then.

    config ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1
        bool "Watch CPU1 Idle Task"
        depends on ESP_TASK_WDT && !FREERTOS_UNICORE
        default y
        help
            If this option is enabled, the Task Wtachdog Timer will wach the CPU1
            Idle Task.

    config ESP_PANIC_HANDLER_IRAM
        bool "Place panic handler code in IRAM"
        default n
        depends on IDF_TARGET_ESP32  # pending ESP32-S2 support
        help
            If this option is disabled (default), the panic handler code is placed in flash not IRAM.
            This means that if ESP-IDF crashes while flash cache is disabled, the panic handler will
            automatically re-enable flash cache before running GDB Stub or Core Dump. This adds some minor
            risk, if the flash cache status is also corrupted during the crash.

            If this option is enabled, the panic handler code is placed in IRAM. This allows the panic
            handler to run without needing to re-enable cache first. This may be necessary to debug some
            complex issues with crashes while flash cache is disabled (for example, when writing to
            SPI flash.)

    config ESP_DEBUG_STUBS_ENABLE
        bool
        default COMPILER_OPTIMIZATION_LEVEL_DEBUG
        depends on !ESP32_TRAX && !ESP32S2_TRAX
        help
            Debug stubs are used by OpenOCD to execute pre-compiled onboard code
            which does some useful debugging stuff, e.g. GCOV data dump.

    config ESP_MAC_ADDR_UNIVERSE_WIFI_STA
        bool

    config ESP_MAC_ADDR_UNIVERSE_WIFI_AP
        bool

    config ESP_MAC_ADDR_UNIVERSE_BT
        bool

    config ESP_MAC_ADDR_UNIVERSE_BT_OFFSET
        int
        default 2 if ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR
        default 1 if ESP32_UNIVERSAL_MAC_ADDRESSES_TWO

    config ESP_MAC_ADDR_UNIVERSE_ETH
        bool

endmenu # Common ESP-related