esp-idf/components/bt/bluedroid/stack/include/gatt_api.h

1157 lines
44 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef GATT_API_H
#define GATT_API_H
#include "bt_target.h"
#include "gattdefs.h"
#include "btm_ble_api.h"
/*****************************************************************************
** Constants
*****************************************************************************/
/* Success code and error codes */
#define GATT_SUCCESS 0x00
#define GATT_INVALID_HANDLE 0x01
#define GATT_READ_NOT_PERMIT 0x02
#define GATT_WRITE_NOT_PERMIT 0x03
#define GATT_INVALID_PDU 0x04
#define GATT_INSUF_AUTHENTICATION 0x05
#define GATT_REQ_NOT_SUPPORTED 0x06
#define GATT_INVALID_OFFSET 0x07
#define GATT_INSUF_AUTHORIZATION 0x08
#define GATT_PREPARE_Q_FULL 0x09
#define GATT_NOT_FOUND 0x0a
#define GATT_NOT_LONG 0x0b
#define GATT_INSUF_KEY_SIZE 0x0c
#define GATT_INVALID_ATTR_LEN 0x0d
#define GATT_ERR_UNLIKELY 0x0e
#define GATT_INSUF_ENCRYPTION 0x0f
#define GATT_UNSUPPORT_GRP_TYPE 0x10
#define GATT_INSUF_RESOURCE 0x11
#define GATT_ILLEGAL_PARAMETER 0x87
#define GATT_NO_RESOURCES 0x80
#define GATT_INTERNAL_ERROR 0x81
#define GATT_WRONG_STATE 0x82
#define GATT_DB_FULL 0x83
#define GATT_BUSY 0x84
#define GATT_ERROR 0x85
#define GATT_CMD_STARTED 0x86
#define GATT_PENDING 0x88
#define GATT_AUTH_FAIL 0x89
#define GATT_MORE 0x8a
#define GATT_INVALID_CFG 0x8b
#define GATT_SERVICE_STARTED 0x8c
#define GATT_ENCRYPED_MITM GATT_SUCCESS
#define GATT_ENCRYPED_NO_MITM 0x8d
#define GATT_NOT_ENCRYPTED 0x8e
#define GATT_CONGESTED 0x8f
/* 0xE0 ~ 0xFC reserved for future use */
#define GATT_CCC_CFG_ERR 0xFD /* Client Characteristic Configuration Descriptor Improperly Configured */
#define GATT_PRC_IN_PROGRESS 0xFE /* Procedure Already in progress */
#define GATT_OUT_OF_RANGE 0xFF /* Attribute value out of range */
typedef UINT8 tGATT_STATUS;
#define GATT_RSP_ERROR 0x01
#define GATT_REQ_MTU 0x02
#define GATT_RSP_MTU 0x03
#define GATT_REQ_FIND_INFO 0x04
#define GATT_RSP_FIND_INFO 0x05
#define GATT_REQ_FIND_TYPE_VALUE 0x06
#define GATT_RSP_FIND_TYPE_VALUE 0x07
#define GATT_REQ_READ_BY_TYPE 0x08
#define GATT_RSP_READ_BY_TYPE 0x09
#define GATT_REQ_READ 0x0A
#define GATT_RSP_READ 0x0B
#define GATT_REQ_READ_BLOB 0x0C
#define GATT_RSP_READ_BLOB 0x0D
#define GATT_REQ_READ_MULTI 0x0E
#define GATT_RSP_READ_MULTI 0x0F
#define GATT_REQ_READ_BY_GRP_TYPE 0x10
#define GATT_RSP_READ_BY_GRP_TYPE 0x11
#define GATT_REQ_WRITE 0x12 /* 0001-0010 (write)*/
#define GATT_RSP_WRITE 0x13
#define GATT_CMD_WRITE 0x52 /* changed in V4.0 01001-0010(write cmd)*/
#define GATT_REQ_PREPARE_WRITE 0x16
#define GATT_RSP_PREPARE_WRITE 0x17
#define GATT_REQ_EXEC_WRITE 0x18
#define GATT_RSP_EXEC_WRITE 0x19
#define GATT_HANDLE_VALUE_NOTIF 0x1B
#define GATT_HANDLE_VALUE_IND 0x1D
#define GATT_HANDLE_VALUE_CONF 0x1E
#define GATT_SIGN_CMD_WRITE 0xD2 /* changed in V4.0 1101-0010 (signed write) see write cmd above*/
#define GATT_OP_CODE_MAX GATT_HANDLE_VALUE_CONF + 1 /* 0x1E = 30 + 1 = 31*/
#define GATT_HANDLE_IS_VALID(x) ((x) != 0)
#define GATT_CONN_UNKNOWN 0
#define GATT_CONN_L2C_FAILURE 1 /* general L2cap failure */
#define GATT_CONN_TIMEOUT HCI_ERR_CONNECTION_TOUT /* 0x08 connection timeout */
#define GATT_CONN_TERMINATE_PEER_USER HCI_ERR_PEER_USER /* 0x13 connection terminate by peer user */
#define GATT_CONN_TERMINATE_LOCAL_HOST HCI_ERR_CONN_CAUSE_LOCAL_HOST /* 0x16 connectionterminated by local host */
#define GATT_CONN_FAIL_ESTABLISH HCI_ERR_CONN_FAILED_ESTABLISHMENT/* 0x03E connection fail to establish */
#define GATT_CONN_LMP_TIMEOUT HCI_ERR_LMP_RESPONSE_TIMEOUT /* 0x22 connection fail for LMP response tout */
#define GATT_CONN_CANCEL L2CAP_CONN_CANCEL /* 0x0100 L2CAP connection cancelled */
typedef UINT16 tGATT_DISCONN_REASON;
/* MAX GATT MTU size
*/
#ifndef GATT_MAX_MTU_SIZE
#define GATT_MAX_MTU_SIZE 517
#endif
/* max legth of an attribute value
*/
#ifndef GATT_MAX_ATTR_LEN
#define GATT_MAX_ATTR_LEN 600
#endif
/* default GATT MTU size over LE link
*/
#define GATT_DEF_BLE_MTU_SIZE 23
/* invalid connection ID
*/
#define GATT_INVALID_CONN_ID 0xFFFF
#ifndef GATT_CL_MAX_LCB
#define GATT_CL_MAX_LCB 12 // 22
#endif
#ifndef GATT_MAX_SCCB
#define GATT_MAX_SCCB 10
#endif
/* GATT notification caching timer, default to be three seconds
*/
#ifndef GATTC_NOTIF_TIMEOUT
#define GATTC_NOTIF_TIMEOUT 3
#endif
/*****************************************************************************
** GATT Structure Definition
*****************************************************************************/
/* Attribute permissions
*/
#define GATT_PERM_READ (1 << 0) /* bit 0 */
#define GATT_PERM_READ_ENCRYPTED (1 << 1) /* bit 1 */
#define GATT_PERM_READ_ENC_MITM (1 << 2) /* bit 2 */
#define GATT_PERM_WRITE (1 << 4) /* bit 4 */
#define GATT_PERM_WRITE_ENCRYPTED (1 << 5) /* bit 5 */
#define GATT_PERM_WRITE_ENC_MITM (1 << 6) /* bit 6 */
#define GATT_PERM_WRITE_SIGNED (1 << 7) /* bit 7 */
#define GATT_PERM_WRITE_SIGNED_MITM (1 << 8) /* bit 8 */
typedef UINT16 tGATT_PERM;
#define GATT_ENCRYPT_KEY_SIZE_MASK (0xF000) /* the MS nibble of tGATT_PERM; key size 7=0; size 16=9 */
#define GATT_READ_ALLOWED (GATT_PERM_READ | GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
#define GATT_READ_AUTH_REQUIRED (GATT_PERM_READ_ENCRYPTED)
#define GATT_READ_MITM_REQUIRED (GATT_PERM_READ_ENC_MITM)
#define GATT_READ_ENCRYPTED_REQUIRED (GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
#define GATT_WRITE_ALLOWED (GATT_PERM_WRITE | GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM | \
GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
#define GATT_WRITE_AUTH_REQUIRED (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_SIGNED)
#define GATT_WRITE_MITM_REQUIRED (GATT_PERM_WRITE_ENC_MITM | GATT_PERM_WRITE_SIGNED_MITM)
#define GATT_WRITE_ENCRYPTED_PERM (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM)
#define GATT_WRITE_SIGNED_PERM (GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
/* Characteristic properties
*/
#define GATT_CHAR_PROP_BIT_BROADCAST (1 << 0)
#define GATT_CHAR_PROP_BIT_READ (1 << 1)
#define GATT_CHAR_PROP_BIT_WRITE_NR (1 << 2)
#define GATT_CHAR_PROP_BIT_WRITE (1 << 3)
#define GATT_CHAR_PROP_BIT_NOTIFY (1 << 4)
#define GATT_CHAR_PROP_BIT_INDICATE (1 << 5)
#define GATT_CHAR_PROP_BIT_AUTH (1 << 6)
#define GATT_CHAR_PROP_BIT_EXT_PROP (1 << 7)
typedef UINT8 tGATT_CHAR_PROP;
/* Format of the value of a characteristic. enumeration type
*/
enum {
GATT_FORMAT_RES, /* rfu */
GATT_FORMAT_BOOL, /* 0x01 boolean */
GATT_FORMAT_2BITS, /* 0x02 2 bit */
GATT_FORMAT_NIBBLE, /* 0x03 nibble */
GATT_FORMAT_UINT8, /* 0x04 uint8 */
GATT_FORMAT_UINT12, /* 0x05 uint12 */
GATT_FORMAT_UINT16, /* 0x06 uint16 */
GATT_FORMAT_UINT24, /* 0x07 uint24 */
GATT_FORMAT_UINT32, /* 0x08 uint32 */
GATT_FORMAT_UINT48, /* 0x09 uint48 */
GATT_FORMAT_UINT64, /* 0x0a uint64 */
GATT_FORMAT_UINT128, /* 0x0B uint128 */
GATT_FORMAT_SINT8, /* 0x0C signed 8 bit integer */
GATT_FORMAT_SINT12, /* 0x0D signed 12 bit integer */
GATT_FORMAT_SINT16, /* 0x0E signed 16 bit integer */
GATT_FORMAT_SINT24, /* 0x0F signed 24 bit integer */
GATT_FORMAT_SINT32, /* 0x10 signed 32 bit integer */
GATT_FORMAT_SINT48, /* 0x11 signed 48 bit integer */
GATT_FORMAT_SINT64, /* 0x12 signed 64 bit integer */
GATT_FORMAT_SINT128, /* 0x13 signed 128 bit integer */
GATT_FORMAT_FLOAT32, /* 0x14 float 32 */
GATT_FORMAT_FLOAT64, /* 0x15 float 64*/
GATT_FORMAT_SFLOAT, /* 0x16 IEEE-11073 16 bit SFLOAT */
GATT_FORMAT_FLOAT, /* 0x17 IEEE-11073 32 bit SFLOAT */
GATT_FORMAT_DUINT16, /* 0x18 IEEE-20601 format */
GATT_FORMAT_UTF8S, /* 0x19 UTF-8 string */
GATT_FORMAT_UTF16S, /* 0x1a UTF-16 string */
GATT_FORMAT_STRUCT, /* 0x1b Opaque structure*/
GATT_FORMAT_MAX /* 0x1c or above reserved */
};
typedef UINT8 tGATT_FORMAT;
/* Characteristic Presentation Format Descriptor value
*/
typedef struct {
UINT16 unit; /* as UUIUD defined by SIG */
UINT16 descr; /* as UUID as defined by SIG */
tGATT_FORMAT format;
INT8 exp;
UINT8 name_spc; /* The name space of the description */
} tGATT_CHAR_PRES;
/* Characteristic Report reference Descriptor format
*/
typedef struct {
UINT8 rpt_id; /* report ID */
UINT8 rpt_type; /* report type */
} tGATT_CHAR_RPT_REF;
#define GATT_VALID_RANGE_MAX_SIZE 16
typedef struct {
UINT8 format;
UINT16 len;
UINT8 lower_range[GATT_VALID_RANGE_MAX_SIZE]; /* in little endian format */
UINT8 upper_range[GATT_VALID_RANGE_MAX_SIZE];
} tGATT_VALID_RANGE;
/* Characteristic Aggregate Format attribute value
*/
#define GATT_AGGR_HANDLE_NUM_MAX 10
typedef struct {
UINT8 num_handle;
UINT16 handle_list[GATT_AGGR_HANDLE_NUM_MAX];
} tGATT_CHAR_AGGRE;
/* Characteristic descriptor: Extended Properties value
*/
#define GATT_CHAR_BIT_REL_WRITE 0x0001 /* permits reliable writes of the Characteristic Value */
#define GATT_CHAR_BIT_WRITE_AUX 0x0002 /* permits writes to the characteristic descriptor */
/* characteristic descriptor: client configuration value
*/
#define GATT_CLT_CONFIG_NONE 0x0000
#define GATT_CLT_CONFIG_NOTIFICATION 0x0001
#define GATT_CLT_CONFIG_INDICATION 0x0002
typedef UINT16 tGATT_CLT_CHAR_CONFIG;
/* characteristic descriptor: server configuration value
*/
#define GATT_SVR_CONFIG_NONE 0x0000
#define GATT_SVR_CONFIG_BROADCAST 0x0001
typedef UINT16 tGATT_SVR_CHAR_CONFIG;
/* Characteristic descriptor: Extended Properties value
*/
#define GATT_CHAR_BIT_REL_WRITE 0x0001 /* permits reliable writes of the Characteristic Value */
#define GATT_CHAR_BIT_WRITE_AUX 0x0002 /* permits writes to the characteristic descriptor */
/* authentication requirement
*/
#define GATT_AUTH_REQ_NONE 0
#define GATT_AUTH_REQ_NO_MITM 1 /* unauthenticated encryption */
#define GATT_AUTH_REQ_MITM 2 /* authenticated encryption */
#define GATT_AUTH_REQ_SIGNED_NO_MITM 3
#define GATT_AUTH_REQ_SIGNED_MITM 4
typedef UINT8 tGATT_AUTH_REQ;
/* Attribute Value structure
*/
typedef struct {
UINT16 conn_id;
UINT16 handle; /* attribute handle */
UINT16 offset; /* attribute value offset, if no offfset is needed for the command, ignore it */
UINT16 len; /* length of attribute value */
tGATT_AUTH_REQ auth_req; /* authentication request */
UINT8 value[GATT_MAX_ATTR_LEN]; /* the actual attribute value */
} tGATT_VALUE;
/* Union of the event data which is used in the server respond API to carry the server response information
*/
typedef union {
/* data type member event */
tGATT_VALUE attr_value; /* READ, HANDLE_VALUE_IND, PREPARE_WRITE */
/* READ_BLOB, READ_BY_TYPE */
UINT16 handle; /* WRITE, WRITE_BLOB */
} tGATTS_RSP;
/* Transports for the primary service */
#define GATT_TRANSPORT_LE BT_TRANSPORT_LE
#define GATT_TRANSPORT_BR_EDR BT_TRANSPORT_BR_EDR
#define GATT_TRANSPORT_LE_BR_EDR (BT_TRANSPORT_LE|BT_TRANSPORT_BR_EDR)
typedef UINT8 tGATT_TRANSPORT;
#define GATT_PREP_WRITE_CANCEL 0x00
#define GATT_PREP_WRITE_EXEC 0x01
typedef UINT8 tGATT_EXEC_FLAG;
/* read request always based on UUID */
typedef struct {
UINT16 handle;
UINT16 offset;
BOOLEAN is_long;
} tGATT_READ_REQ;
/* write request data */
typedef struct {
UINT16 handle; /* attribute handle */
UINT16 offset; /* attribute value offset, if no offfset is needed for the command, ignore it */
UINT16 len; /* length of attribute value */
UINT8 value[GATT_MAX_ATTR_LEN]; /* the actual attribute value */
BOOLEAN need_rsp; /* need write response */
BOOLEAN is_prep; /* is prepare write */
} tGATT_WRITE_REQ;
/* callback data for server access request from client */
typedef union {
tGATT_READ_REQ read_req; /* read request, read by Type, read blob */
tGATT_WRITE_REQ write_req; /* write */
/* prepare write */
/* write blob */
UINT16 handle; /* handle value confirmation */
UINT16 mtu; /* MTU exchange request */
tGATT_EXEC_FLAG exec_write; /* execute write */
} tGATTS_DATA;
typedef UINT8 tGATT_SERV_IF; /* GATT Service Interface */
enum {
GATTS_REQ_TYPE_READ = 1, /* Attribute read request */
GATTS_REQ_TYPE_WRITE, /* Attribute write request */
GATTS_REQ_TYPE_WRITE_EXEC, /* Execute write */
GATTS_REQ_TYPE_MTU, /* MTU exchange information */
GATTS_REQ_TYPE_CONF /* handle value confirmation */
};
typedef UINT8 tGATTS_REQ_TYPE;
/* Client Used Data Structure
*/
/* definition of different discovery types */
enum {
GATT_DISC_SRVC_ALL = 1, /* discover all services */
GATT_DISC_SRVC_BY_UUID, /* discover service of a special type */
GATT_DISC_INC_SRVC, /* discover the included service within a service */
GATT_DISC_CHAR, /* discover characteristics of a service with/without type requirement */
GATT_DISC_CHAR_DSCPT, /* discover characteristic descriptors of a character */
GATT_DISC_MAX /* maximnun discover type */
};
typedef UINT8 tGATT_DISC_TYPE;
/* Discover parameters of different discovery types
*/
typedef struct {
tBT_UUID service;
UINT16 s_handle;
UINT16 e_handle;
} tGATT_DISC_PARAM;
/* GATT read type enumeration
*/
enum {
GATT_READ_BY_TYPE = 1,
GATT_READ_BY_HANDLE,
GATT_READ_MULTIPLE,
GATT_READ_CHAR_VALUE,
GATT_READ_PARTIAL,
GATT_READ_MAX
};
typedef UINT8 tGATT_READ_TYPE;
/* Read By Type Request (GATT_READ_BY_TYPE) Data
*/
typedef struct {
tGATT_AUTH_REQ auth_req;
UINT16 s_handle;
UINT16 e_handle;
tBT_UUID uuid;
} tGATT_READ_BY_TYPE;
/* GATT_READ_MULTIPLE request data
*/
#define GATT_MAX_READ_MULTI_HANDLES 10 /* Max attributes to read in one request */
typedef struct {
tGATT_AUTH_REQ auth_req;
UINT16 num_handles; /* number of handles to read */
UINT16 handles[GATT_MAX_READ_MULTI_HANDLES]; /* handles list to be read */
} tGATT_READ_MULTI;
/* Read By Handle Request (GATT_READ_BY_HANDLE) data */
typedef struct {
tGATT_AUTH_REQ auth_req;
UINT16 handle;
} tGATT_READ_BY_HANDLE;
/* READ_BT_HANDLE_Request data */
typedef struct {
tGATT_AUTH_REQ auth_req;
UINT16 handle;
UINT16 offset;
} tGATT_READ_PARTIAL;
/* Read Request Data
*/
typedef union {
tGATT_READ_BY_TYPE service;
tGATT_READ_BY_TYPE char_type; /* characterisitc type */
tGATT_READ_MULTI read_multiple;
tGATT_READ_BY_HANDLE by_handle;
tGATT_READ_PARTIAL partial;
} tGATT_READ_PARAM;
/* GATT write type enumeration */
enum {
GATT_WRITE_NO_RSP = 1,
GATT_WRITE ,
GATT_WRITE_PREPARE
};
typedef UINT8 tGATT_WRITE_TYPE;
/* Client Operation Complete Callback Data
*/
typedef union {
tGATT_VALUE att_value;
UINT16 mtu;
UINT16 handle;
} tGATT_CL_COMPLETE;
/* GATT client operation type, used in client callback function
*/
#define GATTC_OPTYPE_NONE 0
#define GATTC_OPTYPE_DISCOVERY 1
#define GATTC_OPTYPE_READ 2
#define GATTC_OPTYPE_WRITE 3
#define GATTC_OPTYPE_EXE_WRITE 4
#define GATTC_OPTYPE_CONFIG 5
#define GATTC_OPTYPE_NOTIFICATION 6
#define GATTC_OPTYPE_INDICATION 7
typedef UINT8 tGATTC_OPTYPE;
/* characteristic declaration
*/
typedef struct {
tGATT_CHAR_PROP char_prop; /* characterisitc properties */
UINT16 val_handle; /* characteristic value attribute handle */
tBT_UUID char_uuid; /* characteristic UUID type */
} tGATT_CHAR_DCLR_VAL;
/* primary service group data
*/
typedef struct {
UINT16 e_handle; /* ending handle of the group */
tBT_UUID service_type; /* group type */
} tGATT_GROUP_VALUE;
/* included service attribute value
*/
typedef struct {
tBT_UUID service_type; /* included service UUID */
UINT16 s_handle; /* starting handle */
UINT16 e_handle; /* ending handle */
} tGATT_INCL_SRVC;
typedef union {
tGATT_INCL_SRVC incl_service; /* include service value */
tGATT_GROUP_VALUE group_value; /* Service UUID type.
This field is used with GATT_DISC_SRVC_ALL
or GATT_DISC_SRVC_BY_UUID
type of discovery result callback. */
UINT16 handle; /* When used with GATT_DISC_INC_SRVC type discovery result,
it is the included service starting handle.*/
tGATT_CHAR_DCLR_VAL dclr_value; /* Characteristic declaration value.
This field is used with GATT_DISC_CHAR type discovery.*/
} tGATT_DISC_VALUE;
/* discover result record
*/
typedef struct {
tBT_UUID type;
UINT16 handle;
tGATT_DISC_VALUE value;
} tGATT_DISC_RES;
#define GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP 0 /* start a idle timer for this duration
when no application need to use the link */
#define GATT_LINK_NO_IDLE_TIMEOUT 0xFFFF
#define GATT_INVALID_ACL_HANDLE 0xFFFF
/* discover result callback function */
typedef void (tGATT_DISC_RES_CB) (UINT16 conn_id, tGATT_DISC_TYPE disc_type,
tGATT_DISC_RES *p_data);
/* discover complete callback function */
typedef void (tGATT_DISC_CMPL_CB) (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_STATUS status);
/* Define a callback function for when read/write/disc/config operation is completed. */
typedef void (tGATT_CMPL_CBACK) (UINT16 conn_id, tGATTC_OPTYPE op, tGATT_STATUS status,
tGATT_CL_COMPLETE *p_data);
/* Define a callback function when an initialized connection is established. */
typedef void (tGATT_CONN_CBACK) (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id, BOOLEAN connected,
tGATT_DISCONN_REASON reason, tBT_TRANSPORT transport);
/* attribute request callback for ATT server */
typedef void (tGATT_REQ_CBACK )(UINT16 conn_id, UINT32 trans_id, tGATTS_REQ_TYPE type,
tGATTS_DATA *p_data);
/* channel congestion/uncongestion callback */
typedef void (tGATT_CONGESTION_CBACK )(UINT16 conn_id, BOOLEAN congested);
/* Define a callback function when encryption is established. */
typedef void (tGATT_ENC_CMPL_CB)(tGATT_IF gatt_if, BD_ADDR bda);
/* Define the structure that applications use to register with
** GATT. This structure includes callback functions. All functions
** MUST be provided.
*/
typedef struct {
tGATT_CONN_CBACK *p_conn_cb;
tGATT_CMPL_CBACK *p_cmpl_cb;
tGATT_DISC_RES_CB *p_disc_res_cb;
tGATT_DISC_CMPL_CB *p_disc_cmpl_cb;
tGATT_REQ_CBACK *p_req_cb;
tGATT_ENC_CMPL_CB *p_enc_cmpl_cb;
tGATT_CONGESTION_CBACK *p_congestion_cb;
} tGATT_CBACK;
/*********************** Start Handle Management Definitions **********************
*/
typedef struct {
tBT_UUID app_uuid128;
tBT_UUID svc_uuid;
UINT16 svc_inst;
UINT16 s_handle;
UINT16 e_handle;
BOOLEAN is_primary; /* primary service or secondary */
} tGATTS_HNDL_RANGE;
#define GATTS_SRV_CHG_CMD_ADD_CLIENT 1
#define GATTS_SRV_CHG_CMD_UPDATE_CLIENT 2
#define GATTS_SRV_CHG_CMD_REMOVE_CLIENT 3
#define GATTS_SRV_CHG_CMD_READ_NUM_CLENTS 4
#define GATTS_SRV_CHG_CMD_READ_CLENT 5
typedef UINT8 tGATTS_SRV_CHG_CMD;
typedef struct {
BD_ADDR bda;
BOOLEAN srv_changed;
} tGATTS_SRV_CHG;
typedef union {
tGATTS_SRV_CHG srv_chg;
UINT8 client_read_index; /* only used for sequential reading client srv chg info */
} tGATTS_SRV_CHG_REQ;
typedef union {
tGATTS_SRV_CHG srv_chg;
UINT8 num_clients;
} tGATTS_SRV_CHG_RSP;
typedef struct {
tGATTS_HNDL_RANGE *p_new_srv_start;
} tGATTS_PENDING_NEW_SRV_START;
/* Attibute server handle ranges NV storage callback functions
*/
typedef void (tGATTS_NV_SAVE_CBACK)(BOOLEAN is_saved, tGATTS_HNDL_RANGE *p_hndl_range);
typedef BOOLEAN (tGATTS_NV_SRV_CHG_CBACK)(tGATTS_SRV_CHG_CMD cmd, tGATTS_SRV_CHG_REQ *p_req,
tGATTS_SRV_CHG_RSP *p_rsp);
typedef struct {
tGATTS_NV_SAVE_CBACK *p_nv_save_callback;
tGATTS_NV_SRV_CHG_CBACK *p_srv_chg_callback;
} tGATT_APPL_INFO;
/*
*********************** End Handle Management Definitions **********************/
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function GATT_SetTraceLevel
**
** Description This function sets the trace level. If called with
** a value of 0xFF, it simply returns the current trace level.
**
** Returns The new or current trace level
**
*******************************************************************************/
extern UINT8 GATT_SetTraceLevel (UINT8 new_level);
/*******************************************************************************/
/* GATT Profile API Functions */
/*******************************************************************************/
/* GATT Profile Server Functions */
/*******************************************************************************/
/*******************************************************************************
**
** Function GATTS_AddHandleRange
**
** Description This function add the allocated handles range for the specifed
** application UUID, service UUID and service instance
**
** Parameter p_hndl_range: pointer to allocated handles information
**
** Returns TRUE if handle range is added sucessfully; otherwise FALSE.
**
*******************************************************************************/
extern BOOLEAN GATTS_AddHandleRange(tGATTS_HNDL_RANGE *p_hndl_range);
/*******************************************************************************
**
** Function GATTS_NVRegister
**
** Description Application manager calls this function to register for
** NV save callback function. There can be one and only one
** NV save callback function.
**
** Parameter p_cb_info : callback informaiton
**
** Returns TRUE if registered OK, else FALSE
**
*******************************************************************************/
extern BOOLEAN GATTS_NVRegister (tGATT_APPL_INFO *p_cb_info);
/*******************************************************************************
**
** Function GATTS_CreateService
**
** Description This function is called to reserve a block of handles for a service.
**
** *** It should be called only once per service instance ***
**
** Parameter gatt_if : application if
** p_svc_uuid : service UUID
** svc_inst : instance of the service inside the application
** num_handles : number of handles needed by the service.
** is_pri : is a primary service or not.
**
** Returns service handle if sucessful, otherwise 0.
**
*******************************************************************************/
extern UINT16 GATTS_CreateService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid,
UINT16 svc_inst, UINT16 num_handles, BOOLEAN is_pri);
/*******************************************************************************
**
** Function GATTS_AddIncludeService
**
** Description This function is called to add an included service.
**
** Parameter service_handle : To which service this included service is added to.
** include_svc_handle : included service handle.
**
** Returns included service attribute handle. If 0, add included service
** fail.
**
*******************************************************************************/
extern UINT16 GATTS_AddIncludeService (UINT16 service_handle,
UINT16 include_svc_handle);
/*******************************************************************************
**
** Function GATTS_AddCharacteristic
**
** Description This function is called to add a characteristic into a service.
** It will add a characteristic declaration and characteristic
** value declaration into the service database identified by the
** service handle.
**
** Parameter service_handle : To which service this included service is added to.
** char_uuid : Characteristic UUID.
** perm : Characteristic value declaration attribute permission.
** property : Characteristic Properties
**
** Returns Characteristic value declaration attribute handle. 0 if add
** characteristic failed.
**
*******************************************************************************/
extern UINT16 GATTS_AddCharacteristic (UINT16 service_handle, tBT_UUID *char_uuid,
tGATT_PERM perm, tGATT_CHAR_PROP property);
/*******************************************************************************
**
** Function GATTS_AddCharDescriptor
**
** Description This function is called to add a characteristic descriptor
** into a service database. Add descriptor should follow add char
** to which it belongs, and next add char should be done only
** after all add descriptors for the previous char.
**
** Parameter service_handle : To which service this characteristic descriptor
** is added to.
** perm : Characteristic value declaration attribute
** permission.
** p_descr_uuid : Characteristic descriptor UUID.
**
** Returns Characteristic descriptor attribute handle. 0 if add
** characteristic descriptor failed.
**
*******************************************************************************/
extern UINT16 GATTS_AddCharDescriptor (UINT16 service_handle, tGATT_PERM perm,
tBT_UUID *p_descr_uuid);
/*******************************************************************************
**
** Function GATTS_DeleteService
**
** Description This function is called to delete a service.
**
** Parameter gatt_if : application interface
** p_svc_uuid : service UUID
** svc_inst : instance of the service inside the application
**
** Returns TRUE if operation succeed, FALSE if handle block was not found.
**
*******************************************************************************/
extern BOOLEAN GATTS_DeleteService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid,
UINT16 svc_inst);
/*******************************************************************************
**
** Function GATTS_StartService
**
** Description This function is called to start a service with GATT
**
** Parameter gatt_if : service handle.
** p_cback : application service callback functions.
** sup_transport : supported transport(s) for this primary service
**
** return GATT_SUCCESS if sucessfully started; otherwise error code.
**
*******************************************************************************/
extern tGATT_STATUS GATTS_StartService (tGATT_IF gatt_if, UINT16 service_handle,
tGATT_TRANSPORT sup_transport);
/*******************************************************************************
**
** Function GATTS_StopService
**
** Description This function is called to stop a service
**
** Parameter service_handle : this is the start handle of a service
**
** Returns None.
**
*******************************************************************************/
extern void GATTS_StopService (UINT16 service_handle);
/*******************************************************************************
**
** Function GATTs_HandleValueIndication
**
** Description This function sends a handle value indication to a client.
**
** Parameter conn_id: connection identifier.
** attr_handle: Attribute handle of this handle value indication.
** val_len: Length of the indicated attribute value.
** p_val: Pointer to the indicated attribute value data.
**
** Returns GATT_SUCCESS if sucessfully sent or queued; otherwise error code.
**
*******************************************************************************/
extern tGATT_STATUS GATTS_HandleValueIndication (UINT16 conn_id,
UINT16 attr_handle,
UINT16 val_len, UINT8 *p_val);
/*******************************************************************************
**
** Function GATTS_HandleValueNotification
**
** Description This function sends a handle value notification to a client.
**
** Parameter conn_id: connection identifier.
** attr_handle: Attribute handle of this handle value indication.
** val_len: Length of the indicated attribute value.
** p_val: Pointer to the indicated attribute value data.
**
** Returns GATT_SUCCESS if sucessfully sent; otherwise error code.
**
*******************************************************************************/
extern tGATT_STATUS GATTS_HandleValueNotification (UINT16 conn_id, UINT16 attr_handle,
UINT16 val_len, UINT8 *p_val);
/*******************************************************************************
**
** Function GATTS_SendRsp
**
** Description This function sends the server response to client.
**
** Parameter conn_id: connection identifier.
** trans_id: transaction id
** status: response status
** p_msg: pointer to message parameters structure.
**
** Returns GATT_SUCCESS if sucessfully sent; otherwise error code.
**
*******************************************************************************/
extern tGATT_STATUS GATTS_SendRsp (UINT16 conn_id, UINT32 trans_id,
tGATT_STATUS status, tGATTS_RSP *p_msg);
/*******************************************************************************/
/* GATT Profile Client Functions */
/*******************************************************************************/
/*******************************************************************************
**
** Function GATTC_ConfigureMTU
**
** Description This function is called to configure the ATT MTU size for
** a connection on an LE transport.
**
** Parameters conn_id: connection identifier.
** mtu - attribute MTU size..
**
** Returns GATT_SUCCESS if command started successfully.
**
*******************************************************************************/
extern tGATT_STATUS GATTC_ConfigureMTU (UINT16 conn_id, UINT16 mtu);
/*******************************************************************************
**
** Function GATTC_Discover
**
** Description This function is called to do a discovery procedure on ATT server.
**
** Parameters conn_id: connection identifier.
** disc_type:discovery type.
** p_param: parameters of discovery requirement.
**
** Returns GATT_SUCCESS if command received/sent successfully.
**
*******************************************************************************/
extern tGATT_STATUS GATTC_Discover (UINT16 conn_id,
tGATT_DISC_TYPE disc_type,
tGATT_DISC_PARAM *p_param );
/*******************************************************************************
**
** Function GATTC_Read
**
** Description This function is called to read the value of an attribute from
** the server.
**
** Parameters conn_id: connection identifier.
** type - attribute read type.
** p_read - read operation parameters.
**
** Returns GATT_SUCCESS if command started successfully.
**
*******************************************************************************/
extern tGATT_STATUS GATTC_Read (UINT16 conn_id, tGATT_READ_TYPE type,
tGATT_READ_PARAM *p_read);
/*******************************************************************************
**
** Function GATTC_Write
**
** Description This function is called to read the value of an attribute from
** the server.
**
** Parameters conn_id: connection identifier.
** type - attribute write type.
** p_write - write operation parameters.
**
** Returns GATT_SUCCESS if command started successfully.
**
*******************************************************************************/
extern tGATT_STATUS GATTC_Write (UINT16 conn_id, tGATT_WRITE_TYPE type,
tGATT_VALUE *p_write);
/*******************************************************************************
**
** Function GATTC_ExecuteWrite
**
** Description This function is called to send an Execute write request to
** the server.
**
** Parameters conn_id: connection identifier.
** is_execute - to execute or cancel the prepare write requet(s)
**
** Returns GATT_SUCCESS if command started successfully.
**
*******************************************************************************/
extern tGATT_STATUS GATTC_ExecuteWrite (UINT16 conn_id, BOOLEAN is_execute);
/*******************************************************************************
**
** Function GATTC_SendHandleValueConfirm
**
** Description This function is called to send a handle value confirmation
** as response to a handle value notification from server.
**
** Parameters conn_id: connection identifier.
** handle: the handle of the attribute confirmation.
**
** Returns GATT_SUCCESS if command started successfully.
**
*******************************************************************************/
extern tGATT_STATUS GATTC_SendHandleValueConfirm (UINT16 conn_id, UINT16 handle);
/*******************************************************************************
**
** Function GATT_SetIdleTimeout
**
** Description This function (common to both client and server) sets the idle
** timeout for a tansport connection
**
** Parameter bd_addr: target device bd address.
** idle_tout: timeout value in seconds.
** transport: trasnport option.
**
** Returns void
**
*******************************************************************************/
extern void GATT_SetIdleTimeout (BD_ADDR bd_addr, UINT16 idle_tout,
tGATT_TRANSPORT transport);
/*******************************************************************************
**
** Function GATT_Register
**
** Description This function is called to register an application
** with GATT
**
** Parameter p_app_uuid128: Application UUID
** p_cb_info: callback functions.
**
** Returns 0 for error, otherwise the index of the client registered with GATT
**
*******************************************************************************/
extern tGATT_IF GATT_Register (tBT_UUID *p_app_uuid128, tGATT_CBACK *p_cb_info);
/*******************************************************************************
**
** Function GATT_Deregister
**
** Description This function deregistered the application from GATT.
**
** Parameters gatt_if: applicaiton interface.
**
** Returns None.
**
*******************************************************************************/
extern void GATT_Deregister (tGATT_IF gatt_if);
/*******************************************************************************
**
** Function GATT_StartIf
**
** Description This function is called after registration to start receiving
** callbacks for registered interface. Function may call back
** with connection status and queued notifications
**
** Parameter gatt_if: applicaiton interface.
**
** Returns None
**
*******************************************************************************/
extern void GATT_StartIf (tGATT_IF gatt_if);
/*******************************************************************************
**
** Function GATT_Connect
**
** Description This function initiate a connecttion to a remote device on GATT
** channel.
**
** Parameters gatt_if: applicaiton interface
** bd_addr: peer device address.
** is_direct: is a direct conenection or a background auto connection
** transport : Physical transport for GATT connection (BR/EDR or LE)
**
** Returns TRUE if connection started; FALSE if connection start failure.
**
*******************************************************************************/
extern BOOLEAN GATT_Connect (tGATT_IF gatt_if, BD_ADDR bd_addr,
BOOLEAN is_direct, tBT_TRANSPORT transport);
/*******************************************************************************
**
** Function GATT_CancelConnect
**
** Description This function terminate the connection initaition to a remote
** device on GATT channel.
**
** Parameters gatt_if: client interface. If 0 used as unconditionally disconnect,
** typically used for direct connection cancellation.
** bd_addr: peer device address.
** is_direct: is a direct conenection or a background auto connection
**
** Returns TRUE if connection started; FALSE if connection start failure.
**
*******************************************************************************/
extern BOOLEAN GATT_CancelConnect (tGATT_IF gatt_if, BD_ADDR bd_addr,
BOOLEAN is_direct);
/*******************************************************************************
**
** Function GATT_Disconnect
**
** Description This function disconnect the GATT channel for this registered
** application.
**
** Parameters conn_id: connection identifier.
**
** Returns GATT_SUCCESS if disconnected.
**
*******************************************************************************/
extern tGATT_STATUS GATT_Disconnect (UINT16 conn_id);
/*******************************************************************************
**
** Function GATT_GetConnectionInfor
**
** Description This function use conn_id to find its associated BD address and applciation
** interface
**
** Parameters conn_id: connection id (input)
** p_gatt_if: applicaiton interface (output)
** bd_addr: peer device address. (output)
** transport : physical transport of the GATT connection (BR/EDR or LE)
**
** Returns TRUE the ligical link information is found for conn_id
**
*******************************************************************************/
extern BOOLEAN GATT_GetConnectionInfor(UINT16 conn_id, tGATT_IF *p_gatt_if,
BD_ADDR bd_addr, tBT_TRANSPORT *p_transport);
/*******************************************************************************
**
** Function GATT_GetConnIdIfConnected
**
** Description This function find the conn_id if the logical link for BD address
** and applciation interface is connected
**
** Parameters gatt_if: applicaiton interface (input)
** bd_addr: peer device address. (input)
** p_conn_id: connection id (output)
** transport : physical transport of the GATT connection (BR/EDR or LE)
**
** Returns TRUE the ligical link is connected
**
*******************************************************************************/
extern BOOLEAN GATT_GetConnIdIfConnected(tGATT_IF gatt_if, BD_ADDR bd_addr,
UINT16 *p_conn_id, tBT_TRANSPORT transport);
/*******************************************************************************
**
** Function GATT_Listen
**
** Description This function start or stop LE advertisement and listen for
** connection.
**
** Parameters gatt_if: applicaiton interface
** p_bd_addr: listen for specific address connection, or NULL for
** listen to all device connection.
** start: is a direct conenection or a background auto connection
**
** Returns TRUE if advertisement is started; FALSE if adv start failure.
**
*******************************************************************************/
extern BOOLEAN GATT_Listen (tGATT_IF gatt_if, BOOLEAN start, BD_ADDR_PTR bd_addr);
/*******************************************************************************
**
** Function GATT_ConfigServiceChangeCCC
**
** Description Configure service change indication on remote device
**
** Returns None.
**
*******************************************************************************/
extern void GATT_ConfigServiceChangeCCC (BD_ADDR remote_bda, BOOLEAN enable,
tBT_TRANSPORT transport);
#ifdef __cplusplus
}
#endif
#endif /* GATT_API_H */