esp-idf/examples/peripherals/rmt/musical_buzzer/README.md

66 lines
2.7 KiB
Markdown
Raw Normal View History

2022-06-22 04:28:32 -04:00
| Supported Targets | ESP32-C3 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
| ----------------- | -------- | -------- | -------- | -------- |
2020-09-07 22:28:38 -04:00
# RMT Transmit Loop Count Example -- Musical Buzzer
2020-09-07 22:28:38 -04:00
(See the README.md file in the upper level 'examples' directory for more information about examples.)
RMT tx channel can send symbols in a loop by hardware, which is useful to generate a variable length of periodic signal.
2020-09-07 22:28:38 -04:00
This example shows how to drive a passive buzzer to play a simple music. Each musical score is represented by a constant frequency of PWM with a constant duration. To play a music is to encoding the musical score continuously. An encoder called `score_encoder` is implemented in the example, it works as a simple wrapper of the `copy_encoder`. See [musical_score_encoder](main/musical_score_encoder.c) for details.
2020-09-07 22:28:38 -04:00
## How to Use Example
### Hardware Required
* A development board with any supported Espressif SOC chip (see `Supported Targets` table above)
2020-09-07 22:28:38 -04:00
* A USB cable for Power supply and programming
* A **passive** buzzer
2020-09-07 22:28:38 -04:00
Connection :
```
VCC+--------------+
| /+
+++ |
| | | Passive Buzzer
+++ |
| \+
|
+ |
+<----+
RMT_BUZZER_GPIO+--------+
+-----+
+ |
|
GND+--------------+
2020-09-07 22:28:38 -04:00
```
The GPIO number used in this example can be changed according to your board, by the macro `RMT_BUZZER_GPIO_NUM` defined in the [source file](main/musical_buzzer_example_main.c).
2020-09-07 22:28:38 -04:00
### Build and Flash
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
(To exit the serial monitor, type ``Ctrl-]``.)
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
## Console Output
2020-09-07 22:28:38 -04:00
```
...
I (0) cpu_start: Starting scheduler on APP CPU.
I (318) example: Create RMT TX channel
I (338) example: Install musical score encoder
I (348) example: Playing Beethoven's Ode to joy...
...
2020-09-07 22:28:38 -04:00
```
After you seeing this log, you should hear the music from the buzzer. To play other music, you need to change the musical score array `score` defined in the [source file](main/musical_buzzer_example_main.c). The first member declares the frequency of one musical note, and the second member declares the duration that the note should last.
2020-09-07 22:28:38 -04:00
## Troubleshooting
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.