esp-idf/components/bt/esp_ble_mesh/Kconfig.in

1170 lines
50 KiB
Plaintext
Raw Normal View History

2019-06-30 04:39:00 -04:00
if BLE_MESH
config BLE_MESH_HCI_5_0
bool "Support sending 20ms non-connectable adv packets"
default y
help
It is a temporary solution and needs further modifications.
config BLE_MESH_USE_DUPLICATE_SCAN
bool "Support Duplicate Scan in BLE Mesh"
depends on BT_BLUEDROID_ENABLED
select BTDM_BLE_SCAN_DUPL
select BTDM_BLE_MESH_SCAN_DUPL_EN
2019-06-30 04:39:00 -04:00
default y
help
Enable this option to allow using specific duplicate scan filter
2019-10-30 05:01:18 -04:00
in BLE Mesh, and Scan Duplicate Type must be set by choosing the
option in the Bluetooth Controller section in menuconfig, which is
"Scan Duplicate By Device Address and Advertising Data".
2019-06-30 04:39:00 -04:00
choice BLE_MESH_MEM_ALLOC_MODE
prompt "Memory allocation strategy"
default BLE_MESH_MEM_ALLOC_MODE_INTERNAL
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
help
Allocation strategy for BLE Mesh stack, essentially provides ability to
allocate all required dynamic allocations from,
- Internal DRAM memory only
- External SPIRAM memory only
- Either internal or external memory based on default malloc()
behavior in ESP-IDF
- Internal IRAM memory wherever applicable else internal DRAM
Recommended mode here is always internal, since that is most preferred
from security perspective. But if application requirement does not allow
sufficient free internal memory then alternate mode can be selected.
config BLE_MESH_MEM_ALLOC_MODE_INTERNAL
bool "Internal DRAM"
config BLE_MESH_MEM_ALLOC_MODE_EXTERNAL
bool "External SPIRAM"
depends on ESP32_SPIRAM_SUPPORT
config BLE_MESH_MEM_ALLOC_MODE_DEFAULT
bool "Default alloc mode"
depends on ESP32_SPIRAM_SUPPORT
help
Enable this option to use the default memory allocation strategy when
external SPIRAM is enabled. See the SPIRAM options for more details.
config BLE_MESH_MEM_ALLOC_MODE_IRAM_8BIT
bool "Internal IRAM"
depends on ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY
help
Allows to use IRAM memory region as 8bit accessible region. Every
unaligned (8bit or 16bit) access will result in an exception and
incur penalty of certain clock cycles per unaligned read/write.
endchoice # BLE_MESH_MEM_ALLOC_MODE
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
config BLE_MESH_FREERTOS_STATIC_ALLOC
bool "Enable FreeRTOS static allocation"
depends on FREERTOS_SUPPORT_STATIC_ALLOCATION && (ESP32_SPIRAM_SUPPORT || ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY)
default n
help
Enable this option to use FreeRTOS static allocation APIs for BLE Mesh,
which provides the ability to use different dynamic memory (i.e. SPIRAM
or IRAM) for FreeRTOS objects.
If this option is disabled, the FreeRTOS static allocation APIs will not
be used, and internal DRAM will be allocated for FreeRTOS objects.
choice BLE_MESH_FREERTOS_STATIC_ALLOC_MODE
prompt "Memory allocation for FreeRTOS objects"
depends on BLE_MESH_FREERTOS_STATIC_ALLOC
help
Choose the memory to be used for FreeRTOS objects.
config BLE_MESH_FREERTOS_STATIC_ALLOC_EXTERNAL
bool "External SPIRAM"
depends on ESP32_SPIRAM_SUPPORT
help
If enabled, BLE Mesh allocates dynamic memory from external SPIRAM for
FreeRTOS objects, i.e. mutex, queue, and task stack. External SPIRAM
can only be used for task stack when SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
is enabled. See the SPIRAM options for more details.
config BLE_MESH_FREERTOS_STATIC_ALLOC_IRAM_8BIT
bool "Internal IRAM"
depends on ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY
help
If enabled, BLE Mesh allocates dynamic memory from internal IRAM for
FreeRTOS objects, i.e. mutex, queue. Note: IRAM region cannot be used
as task stack.
endchoice # BLE_MESH_FREERTOS_STATIC_ALLOC_MODE
config BLE_MESH_DEINIT
bool "Support de-initialize BLE Mesh stack"
default y
help
If enabled, users can use the function esp_ble_mesh_deinit() to de-initialize
the whole BLE Mesh stack.
2019-06-30 04:39:00 -04:00
config BLE_MESH_FAST_PROV
bool "Enable BLE Mesh Fast Provisioning"
select BLE_MESH_NODE
select BLE_MESH_PROVISIONER
select BLE_MESH_PB_ADV
default n
help
Enable this option to allow BLE Mesh fast provisioning solution to be used.
2019-10-30 05:01:18 -04:00
When there are multiple unprovisioned devices around, fast provisioning can
greatly reduce the time consumption of the whole provisioning process.
When this option is enabled, and after an unprovisioned device is provisioned
into a node successfully, it can be changed to a temporary Provisioner.
2019-06-30 04:39:00 -04:00
config BLE_MESH_NODE
bool "Support for BLE Mesh Node"
help
2019-10-30 05:01:18 -04:00
Enable the device to be provisioned into a node. This option should be
enabled when an unprovisioned device is going to be provisioned into a
node and communicate with other nodes in the BLE Mesh network.
2019-06-30 04:39:00 -04:00
config BLE_MESH_PROVISIONER
bool "Support for BLE Mesh Provisioner"
help
2019-10-30 05:01:18 -04:00
Enable the device to be a Provisioner. The option should be enabled when
a device is going to act as a Provisioner and provision unprovisioned
devices into the BLE Mesh network.
2019-06-30 04:39:00 -04:00
if BLE_MESH_PROVISIONER
config BLE_MESH_WAIT_FOR_PROV_MAX_DEV_NUM
int "Maximum number of unprovisioned devices that can be added to device queue"
default 10
2019-06-30 04:39:00 -04:00
range 1 100
help
2019-10-30 05:01:18 -04:00
This option specifies how many unprovisioned devices can be added to device
queue for provisioning. Users can use this option to define the size of the
queue in the bottom layer which is used to store unprovisioned device
information (e.g. Device UUID, address).
2019-06-30 04:39:00 -04:00
config BLE_MESH_MAX_PROV_NODES
2019-10-30 05:01:18 -04:00
int "Maximum number of devices that can be provisioned by Provisioner"
default 10
range 1 1000
2019-06-30 04:39:00 -04:00
help
2019-10-30 05:01:18 -04:00
This option specifies how many devices can be provisioned by a Provisioner.
This value indicates the maximum number of unprovisioned devices which can be
provisioned by a Provisioner. For instance, if the value is 6, it means the
2019-10-30 05:01:18 -04:00
Provisioner can provision up to 6 unprovisioned devices.
Theoretically a Provisioner without the limitation of its memory can provision
up to 32766 unprovisioned devices, here we limit the maximum number to 100
just to limit the memory used by a Provisioner. The bigger the value is, the
more memory it will cost by a Provisioner to store the information of nodes.
2019-06-30 04:39:00 -04:00
if BLE_MESH_PB_ADV
config BLE_MESH_PBA_SAME_TIME
2019-10-30 05:01:18 -04:00
int "Maximum number of PB-ADV running at the same time by Provisioner"
2019-06-30 04:39:00 -04:00
default 2
range 1 10
help
2019-10-30 05:01:18 -04:00
This option specifies how many devices can be provisioned at the same time
using PB-ADV. For examples, if the value is 2, it means a Provisioner can
provision two unprovisioned devices with PB-ADV at the same time.
2019-06-30 04:39:00 -04:00
endif # BLE_MESH_PB_ADV
if BLE_MESH_PB_GATT
config BLE_MESH_PBG_SAME_TIME
2019-10-30 05:01:18 -04:00
int "Maximum number of PB-GATT running at the same time by Provisioner"
2019-06-30 04:39:00 -04:00
default 1
range 1 5
help
This option specifies how many devices can be provisioned at the same
2019-10-30 05:01:18 -04:00
time using PB-GATT. For example, if the value is 2, it means a Provisioner
can provision two unprovisioned devices with PB-GATT at the same time.
2019-06-30 04:39:00 -04:00
endif # BLE_MESH_PB_GATT
config BLE_MESH_PROVISIONER_SUBNET_COUNT
2019-10-30 05:01:18 -04:00
int "Maximum number of mesh subnets that can be created by Provisioner"
2019-06-30 04:39:00 -04:00
default 3
range 1 4096
help
2019-10-30 05:01:18 -04:00
This option specifies how many subnets per network a Provisioner can create.
Indeed, this value decides the number of network keys which can be added by a Provisioner.
2019-06-30 04:39:00 -04:00
config BLE_MESH_PROVISIONER_APP_KEY_COUNT
2019-10-30 05:01:18 -04:00
int "Maximum number of application keys that can be owned by Provisioner"
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
default 3
2019-06-30 04:39:00 -04:00
range 1 4096
help
2019-10-30 05:01:18 -04:00
This option specifies how many application keys the Provisioner can have.
Indeed, this value decides the number of the application keys which can be added by a Provisioner.
2019-06-30 04:39:00 -04:00
config BLE_MESH_PROVISIONER_RECV_HB
bool "Support receiving Heartbeat messages"
default n
help
When this option is enabled, Provisioner can call specific functions to enable
or disable receiving Heartbeat messages and notify them to the application layer.
if BLE_MESH_PROVISIONER_RECV_HB
config BLE_MESH_PROVISIONER_RECV_HB_FILTER_SIZE
int "Maximum number of filter entries for receiving Heartbeat messages"
default 3
range 1 1000
help
This option specifies how many heartbeat filter entries Provisioner supports.
The heartbeat filter (acceptlist or rejectlist) entries are used to store a
list of SRC and DST which can be used to decide if a heartbeat message will
be processed and notified to the application layer by Provisioner.
Note: The filter is an empty rejectlist by default.
endif # BLE_MESH_PROVISIONER_RECV_HB
2019-06-30 04:39:00 -04:00
endif # BLE_MESH_PROVISIONER
# Virtual option enabled whenever Generic Provisioning layer is needed
config BLE_MESH_PROV
bool "BLE Mesh Provisioning support"
default y
help
Enable this option to support BLE Mesh Provisioning functionality. For
BLE Mesh, this option should be always enabled.
config BLE_MESH_PB_ADV
bool "Provisioning support using the advertising bearer (PB-ADV)"
select BLE_MESH_PROV
default y
help
Enable this option to allow the device to be provisioned over the
2019-10-30 05:01:18 -04:00
advertising bearer. This option should be enabled if PB-ADV is
going to be used during provisioning procedure.
2019-06-30 04:39:00 -04:00
config BLE_MESH_PB_GATT
bool "Provisioning support using GATT (PB-GATT)"
select BLE_MESH_PROXY
select BLE_MESH_PROV
help
Enable this option to allow the device to be provisioned over GATT.
2019-10-30 05:01:18 -04:00
This option should be enabled if PB-GATT is going to be used during
provisioning procedure.
2019-06-30 04:39:00 -04:00
# Virtual option enabled whenever any Proxy protocol is needed
config BLE_MESH_PROXY
bool "BLE Mesh Proxy protocol support"
default y
help
Enable this option to support BLE Mesh Proxy protocol used by PB-GATT
and other proxy pdu transmission.
config BLE_MESH_GATT_PROXY_SERVER
bool "BLE Mesh GATT Proxy Server"
2019-06-30 04:39:00 -04:00
select BLE_MESH_PROXY
depends on BLE_MESH_NODE
default y
2019-06-30 04:39:00 -04:00
help
This option enables support for Mesh GATT Proxy Service, i.e. the
ability to act as a proxy between a Mesh GATT Client and a Mesh network.
2019-10-30 05:01:18 -04:00
This option should be enabled if a node is going to be a Proxy Server.
2019-06-30 04:39:00 -04:00
config BLE_MESH_NODE_ID_TIMEOUT
int "Node Identity advertising timeout"
depends on BLE_MESH_GATT_PROXY_SERVER
2019-06-30 04:39:00 -04:00
range 1 60
default 60
help
This option determines for how long the local node advertises using
Node Identity. The given value is in seconds. The specification limits
this to 60 seconds and lists it as the recommended value as well.
So leaving the default value is the safest option.
2019-10-30 05:01:18 -04:00
When an unprovisioned device is provisioned successfully and becomes a
node, it will start to advertise using Node Identity during the time
set by this option. And after that, Network ID will be advertised.
2019-06-30 04:39:00 -04:00
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
config BLE_MESH_PROXY_FILTER_SIZE
int "Maximum number of filter entries per Proxy Client"
depends on BLE_MESH_GATT_PROXY_SERVER
default 4
range 1 32767
help
This option specifies how many Proxy Filter entries the local node supports.
The entries of Proxy filter (whitelist or blacklist) are used to store a
list of addresses which can be used to decide which messages will be forwarded
to the Proxy Client by the Proxy Server.
2019-06-30 04:39:00 -04:00
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
config BLE_MESH_GATT_PROXY_CLIENT
bool "BLE Mesh GATT Proxy Client"
select BLE_MESH_PROXY
default n
help
This option enables support for Mesh GATT Proxy Client. The Proxy Client
can use the GATT bearer to send mesh messages to a node that supports the
advertising bearer.
2019-06-30 04:39:00 -04:00
config BLE_MESH_NET_BUF_POOL_USAGE
bool
2019-06-30 04:39:00 -04:00
default y
help
2019-10-30 05:01:18 -04:00
Enable BLE Mesh net buffer pool tracking. This option is used to introduce another
variable in the bottom layer to record the usage of advertising buffers of BLE Mesh
devices. Recommend to enable this option as default.
2019-06-30 04:39:00 -04:00
config BLE_MESH_SETTINGS
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
bool "Store BLE Mesh configuration persistently"
2019-06-30 04:39:00 -04:00
default n
help
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
When selected, the BLE Mesh stack will take care of storing/restoring the BLE
Mesh configuration persistently in flash.
If the device is a BLE Mesh node, when this option is enabled, the configuration
of the device will be stored persistently, including unicast address, NetKey,
AppKey, etc.
And if the device is a BLE Mesh Provisioner, the information of the device will
be stored persistently, including the information of provisioned nodes, NetKey,
AppKey, etc.
2019-06-30 04:39:00 -04:00
if BLE_MESH_SETTINGS
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
2019-06-30 04:39:00 -04:00
config BLE_MESH_STORE_TIMEOUT
int "Delay (in seconds) before storing anything persistently"
range 0 1000000
default 0
help
This value defines in seconds how soon any pending changes are actually
written into persistent storage (flash) after a change occurs.
2019-10-30 05:01:18 -04:00
The option allows nodes to delay a certain period of time to save proper
information to flash. The default value is 0, which means information
will be stored immediately once there are updates.
2019-06-30 04:39:00 -04:00
config BLE_MESH_SEQ_STORE_RATE
int "How often the sequence number gets updated in storage"
range 0 1000000
default 0
2019-06-30 04:39:00 -04:00
help
This value defines how often the local sequence number gets updated in
persistent storage (i.e. flash). e.g. a value of 100 means that the
sequence number will be stored to flash on every 100th increment.
If the node sends messages very frequently a higher value makes more
sense, whereas if the node sends infrequently a value as low as 0
(update storage for every increment) can make sense. When the stack
gets initialized it will add sequence number to the last stored one,
so that it starts off with a value that's guaranteed to be larger than
the last one used before power off.
config BLE_MESH_RPL_STORE_TIMEOUT
int "Minimum frequency that the RPL gets updated in storage"
range 0 1000000
default 0
2019-06-30 04:39:00 -04:00
help
2019-10-30 05:01:18 -04:00
This value defines in seconds how soon the RPL (Replay Protection List)
2019-06-30 04:39:00 -04:00
gets written to persistent storage after a change occurs. If the node
receives messages frequently, then a large value is recommended. If the
node receives messages rarely, then the value can be as low as 0 (which
2019-10-30 05:01:18 -04:00
means the RPL is written into the storage immediately).
2019-06-30 04:39:00 -04:00
Note that if the node operates in a security-sensitive case, and there is
a risk of sudden power-off, then a value of 0 is strongly recommended.
Otherwise, a power loss before RPL being written into the storage may
introduce message replay attacks and system security will be in a
vulnerable state.
2019-10-30 05:01:18 -04:00
config BLE_MESH_SETTINGS_BACKWARD_COMPATIBILITY
bool "A specific option for settings backward compatibility"
depends on BLE_MESH_NODE
default n
help
This option is created to solve the issue of failure in recovering
node information after mesh stack updates. In the old version mesh
stack, there is no key of "mesh/role" in nvs. In the new version
mesh stack, key of "mesh/role" is added in nvs, recovering node
information needs to check "mesh/role" key in nvs and implements
selective recovery of mesh node information. Therefore, there may
be failure in recovering node information during node restarting
after OTA.
The new version mesh stack adds the option of "mesh/role" because
we have added the support of storing Provisioner information, while
the old version only supports storing node information.
If users are updating their nodes from old version to new version,
we recommend enabling this option, so that system could set the flag
in advance before recovering node information and make sure the node
information recovering could work as expected.
config BLE_MESH_SPECIFIC_PARTITION
bool "Use a specific NVS partition for BLE Mesh"
default n
help
When selected, the mesh stack will use a specified NVS partition instead of
default NVS partition. Note that the specified partition must be registered
with NVS using nvs_flash_init_partition() API, and the partition must exists
in the csv file.
When Provisioner needs to store a large amount of nodes' information in the
flash (e.g. more than 20), this option is recommended to be enabled.
config BLE_MESH_PARTITION_NAME
string "Name of the NVS partition for BLE Mesh"
depends on BLE_MESH_SPECIFIC_PARTITION
default "ble_mesh"
help
This value defines the name of the specified NVS partition used by the
mesh stack.
config BLE_MESH_USE_MULTIPLE_NAMESPACE
bool "Support using multiple NVS namespaces by Provisioner"
depends on BLE_MESH_PROVISIONER
default n
help
When selected, Provisioner can use different NVS namespaces to store
different instances of mesh information.
For example, if in the first room, Provisioner uses NetKey A, AppKey
A and provisions three devices, these information will be treated as
mesh information instance A. When the Provisioner moves to the second
room, it uses NetKey B, AppKey B and provisions two devices, then the
information will be treated as mesh information instance B.
Here instance A and instance B will be stored in different namespaces.
With this option enabled, Provisioner needs to use specific functions
to open the corresponding NVS namespace, restore the mesh information,
release the mesh information or erase the mesh information.
config BLE_MESH_MAX_NVS_NAMESPACE
int "Maximum number of NVS namespaces"
depends on BLE_MESH_USE_MULTIPLE_NAMESPACE
default 2
range 1 255
help
This option specifies the maximum NVS namespaces supported by Provisioner.
2019-06-30 04:39:00 -04:00
endif # if BLE_MESH_SETTINGS
config BLE_MESH_SUBNET_COUNT
int "Maximum number of mesh subnets per network"
default 3
range 1 4096
help
This option specifies how many subnets a Mesh network can have at the same time.
2019-10-30 05:01:18 -04:00
Indeed, this value decides the number of the network keys which can be owned by a node.
2019-06-30 04:39:00 -04:00
config BLE_MESH_APP_KEY_COUNT
int "Maximum number of application keys per network"
default 3
range 1 4096
help
This option specifies how many application keys the device can store per network.
2019-10-30 05:01:18 -04:00
Indeed, this value decides the number of the application keys which can be owned by a node.
2019-06-30 04:39:00 -04:00
config BLE_MESH_MODEL_KEY_COUNT
int "Maximum number of application keys per model"
default 3
range 1 4096
help
This option specifies the maximum number of application keys to which each model
can be bound.
config BLE_MESH_MODEL_GROUP_COUNT
int "Maximum number of group address subscriptions per model"
default 3
range 1 4096
help
This option specifies the maximum number of addresses to which each model can
be subscribed.
config BLE_MESH_LABEL_COUNT
int "Maximum number of Label UUIDs used for Virtual Addresses"
default 3
range 0 4096
help
This option specifies how many Label UUIDs can be stored.
2019-10-30 05:01:18 -04:00
Indeed, this value decides the number of the Virtual Addresses can be supported by a node.
2019-06-30 04:39:00 -04:00
config BLE_MESH_CRPL
int "Maximum capacity of the replay protection list"
default 10
range 2 65535
help
This option specifies the maximum capacity of the replay protection list.
It is similar to Network message cache size, but has a different purpose.
2019-10-30 05:01:18 -04:00
The replay protection list is used to prevent a node from replay attack,
which will store the source address and sequence number of the received
mesh messages.
For Provisioner, the replay protection list size should not be smaller than
the maximum number of nodes whose information can be stored. And the element
number of each node should also be taken into consideration. For example, if
Provisioner can provision up to 20 nodes and each node contains two elements,
then the replay protection list size of Provisioner should be at least 40.
2019-06-30 04:39:00 -04:00
config BLE_MESH_MSG_CACHE_SIZE
int "Network message cache size"
default 10
range 2 65535
help
Number of messages that are cached for the network. This helps prevent
unnecessary decryption operations and unnecessary relays. This option
is similar to Replay protection list, but has a different purpose.
2019-10-30 05:01:18 -04:00
A node is not required to cache the entire Network PDU and may cache
only part of it for tracking, such as values for SRC/SEQ or others.
2019-06-30 04:39:00 -04:00
config BLE_MESH_ADV_BUF_COUNT
int "Number of advertising buffers"
default 60
range 6 256
help
Number of advertising buffers available. The transport layer reserves
ADV_BUF_COUNT - 3 buffers for outgoing segments. The maximum outgoing
SDU size is 12 times this value (out of which 4 or 8 bytes are used
for the Transport Layer MIC). For example, 5 segments means the maximum
SDU size is 60 bytes, which leaves 56 bytes for application layer data
using a 4-byte MIC, or 52 bytes using an 8-byte MIC.
config BLE_MESH_SUPPORT_BLE_ADV
bool "Support sending normal BLE advertising packets"
default n
help
When selected, users can send normal BLE advertising packets
with specific API.
if BLE_MESH_SUPPORT_BLE_ADV
config BLE_MESH_BLE_ADV_BUF_COUNT
int "Number of advertising buffers for BLE advertising packets"
default 3
range 1 255
help
Number of advertising buffers for BLE packets available.
endif # BLE_MESH_SUPPORT_BLE_ADV
2019-06-30 04:39:00 -04:00
config BLE_MESH_IVU_DIVIDER
int "Divider for IV Update state refresh timer"
default 4
range 2 96
help
When the IV Update state enters Normal operation or IV Update
in Progress, we need to keep track of how many hours has passed
in the state, since the specification requires us to remain in
the state at least for 96 hours (Update in Progress has an
additional upper limit of 144 hours).
In order to fulfill the above requirement, even if the node might
be powered off once in a while, we need to store persistently
how many hours the node has been in the state. This doesn't
necessarily need to happen every hour (thanks to the flexible
duration range). The exact cadence will depend a lot on the
ways that the node will be used and what kind of power source it
has.
Since there is no single optimal answer, this configuration
option allows specifying a divider, i.e. how many intervals
the 96 hour minimum gets split into. After each interval the
duration that the node has been in the current state gets
stored to flash. E.g. the default value of 4 means that the
state is saved every 24 hours (96 / 4).
config BLE_MESH_TX_SEG_MSG_COUNT
int "Maximum number of simultaneous outgoing segmented messages"
default 1
range 1 BLE_MESH_ADV_BUF_COUNT
help
Maximum number of simultaneous outgoing multi-segment and/or reliable messages.
2019-10-30 05:01:18 -04:00
The default value is 1, which means the device can only send one segmented
message at a time. And if another segmented message is going to be sent, it
should wait for the completion of the previous one.
If users are going to send multiple segmented messages at the same time, this
value should be configured properly.
2019-06-30 04:39:00 -04:00
config BLE_MESH_RX_SEG_MSG_COUNT
int "Maximum number of simultaneous incoming segmented messages"
default 1
range 1 255
help
Maximum number of simultaneous incoming multi-segment and/or reliable messages.
2019-10-30 05:01:18 -04:00
The default value is 1, which means the device can only receive one segmented
message at a time. And if another segmented message is going to be received,
it should wait for the completion of the previous one.
If users are going to receive multiple segmented messages at the same time, this
value should be configured properly.
2019-06-30 04:39:00 -04:00
config BLE_MESH_RX_SDU_MAX
int "Maximum incoming Upper Transport Access PDU length"
default 384
range 36 384
help
Maximum incoming Upper Transport Access PDU length. Leave this to the default
value, unless you really need to optimize memory usage.
config BLE_MESH_TX_SEG_MAX
int "Maximum number of segments in outgoing messages"
ble_mesh: Miscellaneous modifications 1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-01-19 05:57:13 -05:00
default 32
2019-06-30 04:39:00 -04:00
range 2 32
help
Maximum number of segments supported for outgoing messages.
This value should typically be fine-tuned based on what
models the local node supports, i.e. what's the largest
message payload that the node needs to be able to send.
This value affects memory and call stack consumption, which
is why the default is lower than the maximum that the
specification would allow (32 segments).
The maximum outgoing SDU size is 12 times this number (out of
which 4 or 8 bytes is used for the Transport Layer MIC). For
example, 5 segments means the maximum SDU size is 60 bytes,
which leaves 56 bytes for application layer data using a
4-byte MIC and 52 bytes using an 8-byte MIC.
Be sure to specify a sufficient number of advertising buffers
when setting this option to a higher value. There must be at
least three more advertising buffers (BLE_MESH_ADV_BUF_COUNT)
as there are outgoing segments.
config BLE_MESH_RELAY
bool "Relay support"
depends on BLE_MESH_NODE
default y
2019-06-30 04:39:00 -04:00
help
2019-10-30 05:01:18 -04:00
Support for acting as a Mesh Relay Node. Enabling this option will allow
a node to support the Relay feature, and the Relay feature can still
be enabled or disabled by proper configuration messages. Disabling this
option will let a node not support the Relay feature.
2019-06-30 04:39:00 -04:00
if BLE_MESH_RELAY
config BLE_MESH_RELAY_ADV_BUF
bool "Use separate advertising buffers for relay packets"
default n
help
When selected, self-send packets will be put in a high-priority
queue and relay packets will be put in a low-priority queue.
if BLE_MESH_RELAY_ADV_BUF
config BLE_MESH_RELAY_ADV_BUF_COUNT
int "Number of advertising buffers for relay packets"
default 60
range 6 256
help
Number of advertising buffers for relay packets available.
endif # BLE_MESH_RELAY_ADV_BUF
endif # BLE_MESH_RELAY
2019-06-30 04:39:00 -04:00
config BLE_MESH_LOW_POWER
bool "Support for Low Power features"
depends on BLE_MESH_NODE
2019-06-30 04:39:00 -04:00
help
2019-10-30 05:01:18 -04:00
Enable this option to operate as a Low Power Node. If low power consumption
is required by a node, this option should be enabled. And once the node
enters the mesh network, it will try to find a Friend node and establish a
friendship.
2019-06-30 04:39:00 -04:00
if BLE_MESH_LOW_POWER
config BLE_MESH_LPN_ESTABLISHMENT
bool "Perform Friendship establishment using low power"
default n
2019-06-30 04:39:00 -04:00
help
Perform the Friendship establishment using low power with the help of a
reduced scan duty cycle. The downside of this is that the node may miss
out on messages intended for it until it has successfully set up Friendship
with a Friend node.
2019-10-30 05:01:18 -04:00
When this option is enabled, the node will stop scanning for a period of
time after a Friend Request or Friend Poll is sent, so as to reduce more
power consumption.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LPN_AUTO
bool "Automatically start looking for Friend nodes once provisioned"
default n
2019-06-30 04:39:00 -04:00
help
Once provisioned, automatically enable LPN functionality and start looking
for Friend nodes. If this option is disabled LPN mode needs to be manually
enabled by calling bt_mesh_lpn_set(true).
2019-10-30 05:01:18 -04:00
When an unprovisioned device is provisioned successfully and becomes a node,
enabling this option will trigger the node starts to send Friend Request at
a certain period until it finds a proper Friend node.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LPN_AUTO_TIMEOUT
int "Time from last received message before going to LPN mode"
default 15
range 0 3600
depends on BLE_MESH_LPN_AUTO
help
Time in seconds from the last received message, that the node waits out
before starting to look for Friend nodes.
config BLE_MESH_LPN_RETRY_TIMEOUT
int "Retry timeout for Friend requests"
default 6
2019-06-30 04:39:00 -04:00
range 1 3600
help
Time in seconds between Friend Requests, if a previous Friend Request did
not yield any acceptable Friend Offers.
config BLE_MESH_LPN_RSSI_FACTOR
int "RSSIFactor, used in Friend Offer Delay calculation"
range 0 3
default 0
help
The contribution of the RSSI, measured by the Friend node, used in Friend
Offer Delay calculations. 0 = 1, 1 = 1.5, 2 = 2, 3 = 2.5.
2019-10-30 05:01:18 -04:00
RSSIFactor, one of the parameters carried by Friend Request sent by Low Power
node, which is used to calculate the Friend Offer Delay.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LPN_RECV_WIN_FACTOR
int "ReceiveWindowFactor, used in Friend Offer Delay calculation"
range 0 3
default 0
help
The contribution of the supported Receive Window used in Friend Offer
Delay calculations. 0 = 1, 1 = 1.5, 2 = 2, 3 = 2.5.
2019-10-30 05:01:18 -04:00
ReceiveWindowFactor, one of the parameters carried by Friend Request sent by
Low Power node, which is used to calculate the Friend Offer Delay.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LPN_MIN_QUEUE_SIZE
int "Minimum size of the acceptable friend queue (MinQueueSizeLog)"
range 1 7
default 1
help
The MinQueueSizeLog field is defined as log_2(N), where N is the minimum
number of maximum size Lower Transport PDUs that the Friend node can store
in its Friend Queue. As an example, MinQueueSizeLog value 1 gives N = 2,
and value 7 gives N = 128.
config BLE_MESH_LPN_RECV_DELAY
int "Receive delay requested by the local node"
range 10 255
default 100
help
The ReceiveDelay is the time between the Low Power node sending a
request and listening for a response. This delay allows the Friend
node time to prepare the response. The value is in units of milliseconds.
config BLE_MESH_LPN_POLL_TIMEOUT
int "The value of the PollTimeout timer"
range 10 244735
default 300
help
PollTimeout timer is used to measure time between two consecutive
requests sent by a Low Power node. If no requests are received
the Friend node before the PollTimeout timer expires, then the
friendship is considered terminated. The value is in units of 100
milliseconds, so e.g. a value of 300 means 30 seconds.
2019-10-30 05:01:18 -04:00
The smaller the value, the faster the Low Power node tries to get
messages from corresponding Friend node and vice versa.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LPN_INIT_POLL_TIMEOUT
int "The starting value of the PollTimeout timer"
range 10 BLE_MESH_LPN_POLL_TIMEOUT
default BLE_MESH_LPN_POLL_TIMEOUT
help
The initial value of the PollTimeout timer when Friendship is to be
established for the first time. After this, the timeout gradually
grows toward the actual PollTimeout, doubling in value for each iteration.
The value is in units of 100 milliseconds, so e.g. a value of 300 means
30 seconds.
config BLE_MESH_LPN_SCAN_LATENCY
int "Latency for enabling scanning"
range 0 50
default 10
help
Latency (in milliseconds) is the time it takes to enable scanning. In
practice, it means how much time in advance of the Receive Window, the
request to enable scanning is made.
config BLE_MESH_LPN_GROUPS
int "Number of groups the LPN can subscribe to"
range 0 16384
default 8
2019-06-30 04:39:00 -04:00
help
Maximum number of groups to which the LPN can subscribe.
2019-10-30 05:01:18 -04:00
2019-06-30 04:39:00 -04:00
endif # BLE_MESH_LOW_POWER
config BLE_MESH_FRIEND
bool "Support for Friend feature"
2019-06-30 04:39:00 -04:00
help
Enable this option to be able to act as a Friend Node.
if BLE_MESH_FRIEND
config BLE_MESH_FRIEND_RECV_WIN
int "Friend Receive Window"
range 1 255
default 255
help
Receive Window in milliseconds supported by the Friend node.
config BLE_MESH_FRIEND_QUEUE_SIZE
int "Minimum number of buffers supported per Friend Queue"
range 2 65536
default 16
help
Minimum number of buffers available to be stored for each local Friend Queue.
2019-10-30 05:01:18 -04:00
This option decides the size of each buffer which can be used by a Friend node
to store messages for each Low Power node.
2019-06-30 04:39:00 -04:00
config BLE_MESH_FRIEND_SUB_LIST_SIZE
int "Friend Subscription List Size"
range 0 1023
default 3
help
Size of the Subscription List that can be supported by a Friend node for a
2019-10-30 05:01:18 -04:00
Low Power node. And Low Power node can send Friend Subscription List Add or
Friend Subscription List Remove messages to the Friend node to add or remove
subscription addresses.
2019-06-30 04:39:00 -04:00
config BLE_MESH_FRIEND_LPN_COUNT
int "Number of supported LPN nodes"
range 1 1000
default 2
help
Number of Low Power Nodes with which a Friend can have Friendship simultaneously.
2019-10-30 05:01:18 -04:00
A Friend node can have friendship with multiple Low Power nodes at the same time,
while a Low Power node can only establish friendship with only one Friend node at
the same time.
2019-06-30 04:39:00 -04:00
config BLE_MESH_FRIEND_SEG_RX
int "Number of incomplete segment lists per LPN"
range 1 1000
default 1
help
Number of incomplete segment lists tracked for each Friends' LPN.
In other words, this determines from how many elements can segmented
messages destined for the Friend queue be received simultaneously.
endif # BLE_MESH_FRIEND
config BLE_MESH_NO_LOG
bool "Disable BLE Mesh debug logs (minimize bin size)"
depends on BLE_MESH
default n
help
2019-10-30 05:01:18 -04:00
Select this to save the BLE Mesh related rodata code size. Enabling this option
will disable the output of BLE Mesh debug log.
2019-06-30 04:39:00 -04:00
menu "BLE Mesh STACK DEBUG LOG LEVEL"
depends on BLE_MESH && !BLE_MESH_NO_LOG
choice BLE_MESH_STACK_TRACE_LEVEL
prompt "BLE_MESH_STACK"
default BLE_MESH_TRACE_LEVEL_WARNING
depends on BLE_MESH && !BLE_MESH_NO_LOG
help
Define BLE Mesh trace level for BLE Mesh stack.
config BLE_MESH_TRACE_LEVEL_NONE
bool "NONE"
config BLE_MESH_TRACE_LEVEL_ERROR
bool "ERROR"
config BLE_MESH_TRACE_LEVEL_WARNING
bool "WARNING"
config BLE_MESH_TRACE_LEVEL_INFO
bool "INFO"
config BLE_MESH_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BLE_MESH_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BLE_MESH_STACK_TRACE_LEVEL
int
depends on BLE_MESH
default 0 if BLE_MESH_TRACE_LEVEL_NONE
default 1 if BLE_MESH_TRACE_LEVEL_ERROR
default 2 if BLE_MESH_TRACE_LEVEL_WARNING
default 3 if BLE_MESH_TRACE_LEVEL_INFO
default 4 if BLE_MESH_TRACE_LEVEL_DEBUG
default 5 if BLE_MESH_TRACE_LEVEL_VERBOSE
default 2
endmenu #BLE Mesh DEBUG LOG LEVEL
menu "BLE Mesh NET BUF DEBUG LOG LEVEL"
depends on BLE_MESH && !BLE_MESH_NO_LOG
choice BLE_MESH_NET_BUF_TRACE_LEVEL
prompt "BLE_MESH_NET_BUF"
default BLE_MESH_NET_BUF_TRACE_LEVEL_WARNING
depends on BLE_MESH && !BLE_MESH_NO_LOG
help
Define BLE Mesh trace level for BLE Mesh net buffer.
config BLE_MESH_NET_BUF_TRACE_LEVEL_NONE
bool "NONE"
config BLE_MESH_NET_BUF_TRACE_LEVEL_ERROR
bool "ERROR"
config BLE_MESH_NET_BUF_TRACE_LEVEL_WARNING
bool "WARNING"
config BLE_MESH_NET_BUF_TRACE_LEVEL_INFO
bool "INFO"
config BLE_MESH_NET_BUF_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BLE_MESH_NET_BUF_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BLE_MESH_NET_BUF_TRACE_LEVEL
int
depends on BLE_MESH
default 0 if BLE_MESH_NET_BUF_TRACE_LEVEL_NONE
default 1 if BLE_MESH_NET_BUF_TRACE_LEVEL_ERROR
default 2 if BLE_MESH_NET_BUF_TRACE_LEVEL_WARNING
default 3 if BLE_MESH_NET_BUF_TRACE_LEVEL_INFO
default 4 if BLE_MESH_NET_BUF_TRACE_LEVEL_DEBUG
default 5 if BLE_MESH_NET_BUF_TRACE_LEVEL_VERBOSE
default 2
endmenu #BLE Mesh NET BUF DEBUG LOG LEVEL
config BLE_MESH_CLIENT_MSG_TIMEOUT
int "Timeout(ms) for client message response"
range 100 1200000
default 4000
help
Timeout value used by the node to get response of the acknowledged
message which is sent by the client model.
2019-10-30 05:01:18 -04:00
This value indicates the maximum time that a client model waits for
the response of the sent acknowledged messages. If a client model
uses 0 as the timeout value when sending acknowledged messages, then
the default value will be used which is four seconds.
2019-06-30 04:39:00 -04:00
menu "Support for BLE Mesh Foundation models"
2019-06-30 04:39:00 -04:00
config BLE_MESH_CFG_CLI
bool "Configuration Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Configuration Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_HEALTH_CLI
bool "Health Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Health Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_HEALTH_SRV
bool "Health Server model"
default y
help
Enable support for Health Server model.
endmenu #Support for BLE Mesh Foundation models
menu "Support for BLE Mesh Client/Server models"
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_ONOFF_CLI
bool "Generic OnOff Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic OnOff Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_LEVEL_CLI
bool "Generic Level Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Level Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_DEF_TRANS_TIME_CLI
bool "Generic Default Transition Time Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Default Transition Time Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_POWER_ONOFF_CLI
bool "Generic Power OnOff Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Power OnOff Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_POWER_LEVEL_CLI
bool "Generic Power Level Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Power Level Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_BATTERY_CLI
bool "Generic Battery Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Battery Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_LOCATION_CLI
bool "Generic Location Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Location Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_GENERIC_PROPERTY_CLI
bool "Generic Property Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Generic Property Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_SENSOR_CLI
bool "Sensor Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Sensor Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_TIME_CLI
bool "Time Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Time Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_SCENE_CLI
bool "Scene Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Scene Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_SCHEDULER_CLI
bool "Scheduler Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Scheduler Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LIGHT_LIGHTNESS_CLI
bool "Light Lightness Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Light Lightness Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LIGHT_CTL_CLI
bool "Light CTL Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Light CTL Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LIGHT_HSL_CLI
bool "Light HSL Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Light HSL Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LIGHT_XYL_CLI
bool "Light XYL Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Light XYL Client model.
2019-06-30 04:39:00 -04:00
config BLE_MESH_LIGHT_LC_CLI
bool "Light LC Client model"
2019-06-30 04:39:00 -04:00
help
Enable support for Light LC Client model.
config BLE_MESH_GENERIC_SERVER
bool "Generic server models"
default y
help
Enable support for Generic server models.
config BLE_MESH_SENSOR_SERVER
bool "Sensor server models"
default y
help
Enable support for Sensor server models.
config BLE_MESH_TIME_SCENE_SERVER
bool "Time and Scenes server models"
default y
help
Enable support for Time and Scenes server models.
config BLE_MESH_LIGHTING_SERVER
bool "Lighting server models"
default y
help
Enable support for Lighting server models.
2019-06-30 04:39:00 -04:00
endmenu #Support for BLE Mesh Client/Server models
2019-06-30 04:39:00 -04:00
config BLE_MESH_IV_UPDATE_TEST
bool "Test the IV Update Procedure"
default n
help
This option removes the 96 hour limit of the IV Update Procedure and
lets the state to be changed at any time.
2019-10-30 05:01:18 -04:00
If IV Update test mode is going to be used, this option should be enabled.
2019-06-30 04:39:00 -04:00
menu "BLE Mesh specific test option"
config BLE_MESH_SELF_TEST
bool "Perform BLE Mesh self-tests"
default n
help
This option adds extra self-tests which are run every time BLE Mesh
networking is initialized.
if BLE_MESH_SELF_TEST
config BLE_MESH_TEST_AUTO_ENTER_NETWORK
bool "Unprovisioned device enters mesh network automatically"
default y
help
With this option enabled, an unprovisioned device can automatically
enters mesh network using a specific test function without the pro-
visioning procedure. And on the Provisioner side, a test function
needs to be invoked to add the node information into the mesh stack.
config BLE_MESH_TEST_USE_WHITE_LIST
bool "Use white list to filter mesh advertising packets"
default n
help
2020-05-12 03:31:26 -04:00
With this option enabled, users can use white list to filter mesh
advertising packets while scanning.
endif # BLE_MESH_SELF_TEST
2019-06-30 04:39:00 -04:00
config BLE_MESH_SHELL
bool "Enable BLE Mesh shell"
default n
help
Activate shell module that provides BLE Mesh commands to the console.
config BLE_MESH_DEBUG
bool "Enable BLE Mesh debug logs"
default n
help
Enable debug logs for the BLE Mesh functionality.
if BLE_MESH_DEBUG
config BLE_MESH_DEBUG_NET
bool "Network layer debug"
help
Enable Network layer debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_TRANS
bool "Transport layer debug"
help
Enable Transport layer debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_BEACON
bool "Beacon debug"
help
Enable Beacon-related debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_CRYPTO
bool "Crypto debug"
help
Enable cryptographic debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_PROV
bool "Provisioning debug"
help
Enable Provisioning debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_ACCESS
bool "Access layer debug"
help
Enable Access layer debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_MODEL
bool "Foundation model debug"
help
Enable Foundation Models debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_ADV
bool "Advertising debug"
help
Enable advertising debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_LOW_POWER
bool "Low Power debug"
help
Enable Low Power debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_FRIEND
bool "Friend debug"
help
Enable Friend debug logs for the BLE Mesh functionality.
config BLE_MESH_DEBUG_PROXY
bool "Proxy debug"
depends on BLE_MESH_PROXY
help
Enable Proxy protocol debug logs for the BLE Mesh functionality.
endif # BLE_MESH_DEBUG
endmenu
endif # BLE_MESH