esp-idf/examples/bluetooth/ble_mesh/ble_mesh_client_model/README.md

ESP BLE Mesh Client Model Demo
========================

This demo shows how to use the Generic OnOff Client Model to get/set the generic on/off state. The basic procedures are as follows:

1. Download and run this demo.
2. Use any app for BLE Mesh to provision this device as well as the device running the Generic OnOff Server demo.
3. After both onoff client and server devices are provisioned, use UART1 to input the unicast address of the element within the server device.
4. The Generic OnOff Client will start to get and set Generic OnOff states periodically.

>**Notes:**
>
>1. The NetKey index and AppKey index are fixed to 0x0000 in this demo.
>2. If the client device is re-provisioned, but the server device is not, the first few get/set messages from the client will be treated as replay attacks. To avoid this, both devices should be re-provisioned prior to transmitting messages.
component/ble_mesh: ESP BLE Mesh release 1. BLE Mesh Core * Provisioning: Node Role * Advertising and GATT bearer * Authentication OOB * Provisioning: Provisioner Role * Advertising and GATT bearer * Authentication OOB * Networking * Relay * Segmentation and Reassembly * Key Refresh * IV Update * Proxy Support * Multiple Client Models Run Simultaneously * Support multiple client models send packets to different nodes simultaneously * No blocking between client model and server * NVS Storage * Store Provisioning Data of BLE Mesh Nodes in Flash 2. BLE Mesh Applications * BLE Mesh Node & Provisioner * Node Example * Provisioner Example * Node + Generic OnOff Client Example * Fast Provisioning * Vendor Fast Prov Server Model * Vendor Fast Prov Client Model * Examples * Wi-Fi & BLE Mesh Coexistence * Example * BLE Mesh Console Commands * Example 3. BLE Mesh Models * Foundation Models * Configuration Server Model * Configuration Client Model * Health Server Model * Health Client Model * Generic Client Models * Generic OnOff Client * Generic Level Client * Generic Location Client * Generic Default Transition Timer Client * Generic Power OnOff Client * Generic Power Level Client * Generic Battery Client * Generic Property Client * Generic Server Models * Generic OnOff Server (Example) * Lighting Client Models * Light Lightness Client * Light CTL Client * Light HSL Client * Light xyL Client * Light LC Client * Sensor Client Model * Sensor Client * Time and Scenes Client Models * Time Client * Scene Client * Scheduler Client 2019-01-07 15:16:47 +08:00			`ESP BLE Mesh Client Model Demo`
			`========================`

			`This demo shows how to use the Generic OnOff Client Model to get/set the generic on/off state. The basic procedures are as follows:`

			`1. Download and run this demo.`
			`2. Use any app for BLE Mesh to provision this device as well as the device running the Generic OnOff Server demo.`
			`3. After both onoff client and server devices are provisioned, use UART1 to input the unicast address of the element within the server device.`
			`4. The Generic OnOff Client will start to get and set Generic OnOff states periodically.`

			`>Notes:`
			`>`
			`>1. The NetKey index and AppKey index are fixed to 0x0000 in this demo.`
			`>2. If the client device is re-provisioned, but the server device is not, the first few get/set messages from the client will be treated as replay attacks. To avoid this, both devices should be re-provisioned prior to transmitting messages.`