esp-idf/components/idf_test/integration_test/TC_IT_BTSTK_SMP.yml

.SMP_CASE: &SMP_CASE
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  initial condition: BLE_INIT_SMP
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: SMP
  version: v1 (2017-05-26)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''

.just_work_pair: &just_work_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:SecReq']
    - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.slave_passkey_entry_pair: &slave_passkey_entry_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:SecReq']
    - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
      - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
    - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a 1 -k <key>"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.master_passkey_entry_pair: &master_passkey_entry_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:SecReq']
    - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
      - ['P SSC1 C +BLESMP:PassKeyReq', 'P SSC2 A <key>:BLESMP:PassKeyNotify,(\d+)']
    - - "SSC SSC1 blesmp -K -r <dut2_bt_mac> -a 1 -k <key>"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.both_side_passkey_entry_pair: &both_side_passkey_entry_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:SecReq']
    - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
      - ['P SSC[1,2] C +BLESMP:PassKeyReq']
    - - "SSC SSC[1,2] blesmp -K -r <dut[2,1]_bt_mac> -a 1 -k 123456"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.numberic_comparision_pair: &numberic_comparision_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:SecReq']
    - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
      - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
    - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.check_connection: &check_connection
  LIST_MERGE:
    - - "SSC SSC1 gattc -D -z primaryService -p 0x10"
      - ["R SSC1 C +GATTC:DiscoverService,A000"]

.disconnect: &disconnect
  LIST_MERGE:
    - - "SSC SSC1 bleconn -D -z all"
      - ['P SSC1 C +BLE:GattcDisconnect', 'P SSC2 C +BLE:GattsDisconnect']
    - - "SSC SSC2 bleadv -D -z start"
      - ['P SSC2 C +BLEADV:OK']

.start_pair: &start_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:SecReq']

.config_just_work: &config_just_work
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x00"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_master_passkey_entry: &config_master_passkey_entry
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
      - ['P SSC1 C +BLESMP:OK']
    - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
      - ['P SSC2 C +BLESMP:OK']

.config_slave_passkey_entry: &config_slave_passkey_entry
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_both_side_passkey_entry: &config_both_side_passkey_entry
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x02"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_numberic_comparision: &config_numberic_comparision
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_bond_device: &config_bond_device
  LIST_MERGE:
    - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x01"
      - ['P SSC2 C +BLESMP:OK']
    - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
      - ['P SSC2 C +BLESMP:OK']


test cases:
- ID: BTSTK_SMP_01001
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity None + None test
  steps: |
    1. set sec properity None on initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_01002
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity None + SC test
  steps: |
    1. set sec properity None on initiator and SC on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_01003
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity None + MITM test
  steps: |
    1. set sec properity None on initiator and MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01004
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity None + SC_MITM test
  steps: |
    1. set sec properity None on initiator and SC_MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01005
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC + None test
  steps: |
    1. set sec properity SC only on initiator and None on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_01006
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC + SC test
  steps: |
    1. set sec properity SC on initiator and SC on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_01007
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC + MITM test
  steps: |
    1. set sec properity SC on initiator and MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01008
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC + SC_MITM test
  steps: |
    1. set sec properity SC on initiator and SC_MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use numberic comparision and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_01009
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity MITM + None test
  steps: |
    1. set sec properity MITM on initiator and None on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01010
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity MITM + SC test
  steps: |
    1. set sec properity MITM on initiator and SC on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01011
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity MITM + MITM test
  steps: |
    1. set sec properity MITM on initiator and MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01012
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity MITM + SC_MITM test
  steps: |
    1. set sec properity MITM on initiator and SC_MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01013
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC_MITM + None test
  steps: |
    1. set sec properity SC_MITM on initiator and SC on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01014
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC_MITM + SC test
  steps: |
    1. set sec properity SC_MITM on initiator and SC on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use numberic comparision and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x08"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_01015
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC_MITM + MITM test
  steps: |
    1. set sec properity SC_MITM on initiator and MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_01016
  <<: *SMP_CASE
  test point 2: BLE SMP sec properity test
  summary: BLE SMP sec properity SC_MITM + SC_MITM test
  steps: |
    1. set sec properity SC_MITM on initiator and SC_MITM on responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2, do pair procedure
    4. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use numberic comparision and pair succeed
    4. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC2 C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_02001
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayOnly + DisplayOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayOnly on initiator and DisplayOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayOnly on initiator and DisplayOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just work and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02002
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayOnly + DisplayYesNo test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayOnly on initiator and DisplayYesNo on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayOnly on initiator and DisplayYesNo on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just work and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02003
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayOnly + KeyboardOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayOnly on initiator and KeyboardOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayOnly on initiator and KeyboardOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (initiator displays, responder inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02004
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayOnly + NoInputNoOutput test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayOnly on initiator and NoInputNoOutput on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayOnly on initiator and NoInputNoOutput on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02005
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayOnly + KeyboardDisplay test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayOnly on initiator and KeyboardDisplay on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayOnly on initiator and KeyboardDisplay on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (initiator displays, responder inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02006
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayYesNo + DisplayOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayYesNo on initiator and DisplayOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayYesNo on initiator and DisplayOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just work and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02007
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayYesNo + DisplayYesNo test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayYesNo on initiator and DisplayYesNo on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayYesNo on initiator and DisplayYesNo on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just work and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use numberic comparision and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_02008
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayYesNo + KeyboardOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayYesNo on initiator and KeyboardOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayYesNo on initiator and KeyboardOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (initiator displays, responder inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02009
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayYesNo + NoInputNoOutput test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayYesNo on initiator and NoInputNoOutput on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayYesNo on initiator and NoInputNoOutput on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02010
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities DisplayYesNo + KeyboardDisplay test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to DisplayYesNo on initiator and KeyboardDisplay on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to DisplayYesNo on initiator and KeyboardDisplay on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use numberic comparision and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_02011
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardOnly + DisplayOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardOnly on initiator and DisplayOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardOnly on initiator and DisplayOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (responder displays, initiator inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (responder displays, initiator inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02012
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardOnly + DisplayYesNo test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardOnly on initiator and DisplayYesNo on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardOnly on initiator and DisplayYesNo on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (responder displays, initiator inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (responder displays, initiator inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02013
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardOnly + KeyboardOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardOnly on initiator and KeyboardOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardOnly on initiator and KeyboardOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator and responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (initiator and responder inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *both_side_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *both_side_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02014
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardOnly + NoInputNoOutput test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardOnly on initiator and NoInputNoOutput on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardOnly on initiator and NoInputNoOutput on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02015
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardOnly + KeyboardDisplay test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardOnly on initiator and KeyboardDisplay on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardOnly on initiator and KeyboardDisplay on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (responder displays, initiator inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (responder displays, initiator inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02016
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities NoInputNoOutput + DisplayOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to NoInputNoOutput on initiator and DisplayOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to NoInputNoOutput on initiator and DisplayOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02017
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities NoInputNoOutput + DisplayYesNo test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to NoInputNoOutput on initiator and DisplayYesNo on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to NoInputNoOutput on initiator and DisplayYesNo on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02018
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities NoInputNoOutput + KeyboardOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to NoInputNoOutput on initiator and KeyboardOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to NoInputNoOutput on initiator and KeyboardOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02019
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities NoInputNoOutput + NoInputNoOutput test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to NoInputNoOutput on initiator and NoInputNoOutput on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to NoInputNoOutput on initiator and NoInputNoOutput on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02020
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities NoInputNoOutput + KeyboardDisplay test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to NoInputNoOutput on initiator and KeyboardDisplay on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to NoInputNoOutput on initiator and KeyboardDisplay on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02021
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardDisplay + DisplayOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and DisplayOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardDisplay on initiator and DisplayOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (responder displays, initiator inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (responder displays, initiator inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x00"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02022
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardDisplay + DisplayYesNo test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and DisplayYesNo on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardDisplay on initiator and DisplayYesNo on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (responder displays, initiator inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use numberic comparision and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *master_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x01"
    - ['P SSC2 C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_02023
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardDisplay + KeyboardOnly test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and KeyboardOnly on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardDisplay on initiator and KeyboardOnly on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use passkey entry (initiator displays, responder inputs) and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x02"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
- ID: BTSTK_SMP_02024
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardDisplay + NoInputNoOutput test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and NoInputNoOutput on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardDisplay on initiator and NoInputNoOutput on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use just works and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use just works and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
    - ['P SSC2 C +BLESMP:OK']
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_02025
  <<: *SMP_CASE
  test point 2: BLE SMP IO Capabilities test
  summary: BLE SMP IO Capabilities KeyboardDisplay + KeyboardDisplay test
  allow fail: 2/3
  steps: |
    1. set sec properity MITM on both initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and KeyboardDisplay on responder
    3. DUT1 connect to DUT2, do pair (if required)
    4. do service discovery
    5. disconnect
    6. set sec properity SC_MITM on both initiator and responder
    7. set IOCAP to KeyboardDisplay on initiator and KeyboardDisplay on responder
    8. DUT1 connect to DUT2, do pair (if required)
    9. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. use passkey entry (initiator displays, responder inputs) and pair succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. use numberic comparision and pair succeed
    9. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *slave_passkey_entry_pair
  - *check_connection
  - *disconnect
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
    - ['P SSC2 C +BLESMP:OK']
  - *numberic_comparision_pair
  - *check_connection
- ID: BTSTK_SMP_03001
  <<: *SMP_CASE
  test point 2: BLE SMP pair with pairing request test
  summary: BLE SMP start pair with pairing request
  steps: |
    1. set sec properity None on initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2
    4. DUT2 send secruity request, do pair (if required)
    5. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. connected
    4. use just work and pair succeed
    5. succeed
  cmd set:
  - ""
  - *config_just_work
  - *just_work_pair
  - *check_connection
- ID: BTSTK_SMP_03002
  <<: *SMP_CASE
  test point 2: BLE SMP initiate pair test
  summary: BLE SMP start pair with pairing request
  steps: |
    1. set sec properity None on initiator and responder
    2. set IOCAP to KeyboardDisplay on initiator and responder
    3. DUT1 connect to DUT2
    4. DUT1 send pair req, do pair (if required)
    5. do service discovery
  expected result: |
    1. succeed
    2. succeed
    3. connected
    4. use just work and pair succeed
    5. succeed
  cmd set:
  - ""
  - *config_just_work
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC1 blesmp -E -r <dut2_bt_mac> -z Enc"
    - ['P SSC2 C +BLESMP:SecReq']
  - - "SSC SSC2 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - *check_connection
- ID: BTSTK_SMP_04001
  <<: *SMP_CASE
  test point 2: BLE SMP key test
  summary: BLE SMP set key size test
  allow fail: 1/2
  steps: |
    1. set key size 7
    2. set key size 6
    3. do just work pair
  expected result: |
    1. succeed
    2. LTK size is 7
    3. succeed
  cmd set:
  - ""
  - *config_numberic_comparision
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x07"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x06"
    - ['P SSC1 C +BLESMP:OK']
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
    - ['P SSC[1-2] C +BLESMP:Key,LocalLTK,16 C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_04002
  <<: *SMP_CASE
  test point 2: BLE SMP key test
  summary: BLE SMP set key size test
  allow fail: 1/2
  steps: |
    1. set key size 16
    2. set key size 17
    3. do just work pair
  expected result: |
    1. succeed
    2. LTK size is 17
    3. succeed
  cmd set:
  - ""
  - *config_numberic_comparision
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x10"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x11"
    - ['P SSC1 C +BLESMP:OK']
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
    - ['P SSC[1-2] C +BLESMP:Key,LocalLTK,16 C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_05001
  <<: *SMP_CASE
  test point 2: BLE SMP unsuccessful pair reply test
  summary: BLE SMP unsuccessful passkey entry test
  steps: |
    1. enter passkey entry phase
    2. entry incorrect passkey and accept
    3. enter passkey entry phase
    4. entry correct passkey and reject
    5. enter passkey entry phase
    6. send numberic comparision accept
    7. enter passkey entry phase
    8. send numberic comparision reject
  expected result: |
    1. succeed
    2. pair failed
    3. succeed
    4. pair failed
    5. succeed
    6. pair failed
    7. succeed
    8. pair failed
  cmd set:
  - ""
  - *config_slave_passkey_entry
  - - LOOP 2 6 "[1,0]" "['000001','<key>']"
    - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a {%d} -k {%s}"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
  - - LOOP 2 6 "[1,0]"
    - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a {%d}"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
- ID: BTSTK_SMP_05002
  <<: *SMP_CASE
  test point 2: BLE SMP unsuccessful pair reply test
  summary: BLE SMP unsuccessful numberic comparision test
  steps: |
    1. enter numberic comparision phase
    2. entry passkey and accept
    3. enter numberic comparision phase
    4. send numberic comparision reject
  expected result: |
    1. succeed
    2. pair failed
    3. succeed
    4. pair failed
  cmd set:
  - ""
  - *config_numberic_comparision
  - - LOOP 2 6 "[1,0]"
    - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a {%d} -k 000001"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
  - - LOOP 2 6 "[1,0]" "[0,1]"
    - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1,2] blesmp -C -r <dut[2,1]_bt_mac> -a [{%d},{%d}]"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
- ID: BTSTK_SMP_05003
  <<: *SMP_CASE
  test point 2: BLE SMP unsuccessful pair reply test
  summary: BLE SMP unsuccessful passkey entry on both side test
  steps: |
    1. enter both side passkey entry phase
    2. entry different passkey and accept
    3. enter both side passkey entry phase
    4. entry same passkey and reject
    5. enter both side passkey entry phase
    6. send numberic comparision accept
    7. enter both side passkey entry phase
    8. send numberic comparision reject
  expected result: |
    1. succeed
    2. pair failed
    3. succeed
    4. pair failed
    5. succeed
    6. pair failed
    7. succeed
    8. pair failed
  cmd set:
  - ""
  - *config_both_side_passkey_entry
  - - LOOP 2 6 "[1,0]" "['000002','000001']"
    - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['R SSC[1,2] C +BLESMP:PassKeyReq']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a [1,{%d}] -k [000001,{%s}]"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
  - - LOOP 2 6 "[1,0]" "[0,1]"
    - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC[1,2] C +BLESMP:PassKeyReq']
  - - "SSC SSC[1,2] blesmp -C -r <dut[2,1]_bt_mac> -a [{%d},{%d}]"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
- ID: BTSTK_SMP_05004
  <<: *SMP_CASE
  test point 2: BLE SMP unsuccessful pair reply test
  summary: BLE SMP reject pair
  steps: |
    1. DUT1 connect to DUT2
    2. DUT2 send security req
    3. DUT1 reject pairing
    4. disconnect
    5. DUT1 connect to DUT2
    6. DUT1 send pairing req
    7. DUT2 reject pairing
    4. disconnect
  expected result: |
    1. succeed
    2. succeed
    3. succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed
    8. succeed
  cmd set:
  - ""
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 0 -r <dut2_bt_mac>"
    - [""]
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC1 blesmp -E -r <dut2_bt_mac> -z Enc"
    - ['P SSC2 C +BLESMP:SecReq']
  - - "SSC SSC2 blesmp -R -a 0 -r <dut1_bt_mac>"
    - [""]
- ID: BTSTK_SMP_06001
  <<: *SMP_CASE
  test environment: SSC_T1_1
  initial condition: BLE_DEINIT1
  test point 2: BLE SMP use API in abnormal state
  summary: BLE SMP use API when BLE not initialized, not enabled or not registered callback
  steps: |
    1. set security parameter
    2. send security response
    3. send passkey reply
    4. send confirm reply
    5. init BLE
    6. set security parameter
    7. send security response
    8. send passkey reply
    9. send confirm reply
    10. init BLE
    11. set security parameter
    12. send security response
    13. send passkey reply
    14. send confirm reply
  expected result: |
    1. failed
    2. failed
    3. failed
    4. failed
    5. succeed
    6. failed
    7. failed
    8. failed
    9. failed
    10. succeed
    11. failed
    12. failed
    13. failed
    14. failed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP:ERROR']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP:ERROR']
  - - "SSC SSC1 blesmp -K -r <dut1_bt_mac> -a 1 -k 123456"
    - ['P SSC1 C +BLESMP:ERROR']
  - - "SSC SSC1 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC1 C +BLESMP:ERROR']
  - - SSC SSC1 bt -D -z init
    - ['R SSC1 C +BT:']
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -K -r <dut1_bt_mac> -a 1 -k 123456"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC1 C +BLESMP']
  - - SSC SSC1 bt -D -z enable
    - ['R SSC1 C +BT:']
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -K -r <dut1_bt_mac> -a 1 -k 123456"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC1 C +BLESMP']
- ID: BTSTK_SMP_06002
  <<: *SMP_CASE
  test point 2: BLE SMP use API in abnormal state
  summary: BLE SMP use phase 2 API in phase 1
  steps: |
    1. enter entry passkey phase
    2. send ble security response
    3. continue pairing
  expected result: |
    1. succeed
    2. failed
    3. pair succeed
  cmd set:
  - ""
  - *config_slave_passkey_entry
  - *start_pair
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a 1 -k <key>"
    - ['P SSC2 C +BLESMP']
  - - "SSC SSC2 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC2 C +BLESMP']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a 1 -k <key>"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_06003
  <<: *SMP_CASE
  test point 2: BLE SMP use API in abnormal state
  summary: BLE SMP use phase 1 API in phase 2
  steps: |
    1. enter phase 1 (don't send security response)
    2. do passkey entry
    3. do number comparision
  expected result: |
    1. succeed
    2. failed
    3. failed
  cmd set:
  - ""
  - *config_slave_passkey_entry
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a 1 -k <key>"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_06004
  <<: *SMP_CASE
  test point 2: BLE SMP use API in abnormal state
  summary: BLE SMP master disconnect during pairing and repairing
  steps: |
    1. enter phase 1 (don't send security response)
    2. disconnect
    3. enter phase 1, send response but do not do pair
    4. disconnect
  expected result: |
    1. succeed
    2. disconnected
    3. succeed
    4. disconnected
  cmd set:
  - ""
  - *config_slave_passkey_entry
  - *start_pair
  - *disconnect
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - *disconnect
- ID: BTSTK_SMP_06005
  <<: *SMP_CASE
  test point 2: BLE SMP use API in abnormal state
  summary: BLE SMP slave disconnect during pairing and repairing
  steps: |
    1. enter phase 1 (don't send security response)
    2. disconnect
    3. enter phase 1, send response but do not do pair
    4. disconnect
  expected result: |
    1. succeed
    2. disconnected
    3. succeed
    4. disconnected
  cmd set:
  - ""
  - *config_slave_passkey_entry
  - *start_pair
  - - "SSC SSC2 bleconn -D -z all"
    - ['P SSC2 C +BLE:GattsDisconnect', 'P SSC1 C +BLE:GattcDisconnect,OK']
  - - "SSC SSC2 bleadv -D -z start"
    - ['P SSC2 C +BLEADV:Start,OK']
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC2 bleconn -D -z all"
    - ['P SSC2 C +BLE:GattsDisconnect', 'P SSC1 C +BLE:GattcDisconnect,OK']
- ID: BTSTK_SMP_07001
  <<: *SMP_CASE
  test point 2: BLE SMP bond and NVS test
  summary: BLE SMP initiator bond with lagecy pairing
  steps: |
    1. DUT1 and DUT2 SMP bond with lagecy pairing
    2. DUT1 disconnect
    3. DUT1 connect to DUT2
    4. DUT1 disconnect
    5. DUT1 reboot
    6. DUT1 connect to DUT2
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed without pairing again
    4. succeed
    5. succeed
    6. connect succeed without pairing again
  cmd set:
  - ""
  - *config_master_passkey_entry
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC1 blesmp -E -r <dut2_bt_mac> -z Enc"
    - ['P SSC2 C +BLESMP:SecReq']
  - - "SSC SSC2 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP:PassKeyReq', 'P SSC2 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC1 blesmp -K -r <dut2_bt_mac> -a 1 -k <key>"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC[1-2] reboot"
    - ['P SSC[1-2] C !!!ready!!!']
  - - "SSC SSC[1-2] ble -R"
    - ['R SSC[1-2] C +BLE:']
  - - "SSC SSC2 gatts -S -z load -p 0xA0"
    - ['R SSC2 C +GATTS:StartService,OK,A000']
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ['R SSC2 C +BLEADV:SetAdv,OK']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - - "SSC SSC[1-2] blesmp -L -c [1,0]"
    - ['R SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_07002
  <<: *SMP_CASE
  test point 2: BLE SMP bond and NVS test
  summary: BLE SMP initiator bond with secure connection pairing
  steps: |
    1. DUT1 and DUT2 SMP bond with secure connection pairing
    2. DUT1 disconnect
    3. DUT1 connect to DUT2
    4. DUT1 disconnect
    5. DUT1 reboot
    6. DUT1 connect to DUT2
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed without pairing again
    4. succeed
    5. succeed
    6. connect succeed without pairing again
  cmd set:
  - ""
  - *config_numberic_comparision
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC1 blesmp -E -r <dut2_bt_mac> -z Enc"
    - ['P SSC2 C +BLESMP:SecReq']
  - - "SSC SSC2 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC[1-2] reboot"
    - ['P SSC[1-2] C !!!ready!!!']
  - - "SSC SSC[1-2] ble -R"
    - ['R SSC[1-2] C +BLE:']
  - - "SSC SSC2 gatts -S -z load -p 0xA0"
    - ['R SSC2 C +GATTS:StartService,OK,A000']
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ['R SSC2 C +BLEADV:SetAdv,OK']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - - "SSC SSC[1-2] blesmp -L -c [1,0]"
    - ['R SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_07003
  <<: *SMP_CASE
  test point 2: BLE SMP bond and NVS test
  summary: BLE SMP responder bond with lagecy pairing
  steps: |
    1. DUT1 and DUT2 SMP bond with lagecy pairing
    2. DUT1 disconnect
    3. DUT1 connect to DUT2
    4. DUT1 disconnect
    5. DUT1 reboot
    6. DUT1 connect to DUT2
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed without pairing again
    4. succeed
    5. succeed
    6. connect succeed without pairing again
  cmd set:
  - ""
  - *config_master_passkey_entry
  - *master_passkey_entry_pair
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC[1-2] reboot"
    - ['P SSC[1-2] C !!!ready!!!']
  - - "SSC SSC[1-2] ble -R"
    - ['R SSC[1-2] C +BLE:']
  - - "SSC SSC2 gatts -S -z load -p 0xA0"
    - ['R SSC2 C +GATTS:StartService,OK,A000']
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ['R SSC2 C +BLEADV:SetAdv,OK']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - - "SSC SSC[1-2] blesmp -L -c [1,0]"
    - ['R SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_07004
  <<: *SMP_CASE
  test point 2: BLE SMP bond and NVS test
  summary: BLE SMP responder bond with secure connection pairing
  steps: |
    1. DUT1 and DUT2 SMP bond with secure connection pairing
    2. DUT1 disconnect
    3. DUT1 connect to DUT2
    4. DUT1 disconnect
    5. DUT1 reboot
    6. DUT1 connect to DUT2
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed without pairing again
    4. succeed
    5. succeed
    6. connect succeed without pairing again
  cmd set:
  - ""
  - *config_numberic_comparision
  - *numberic_comparision_pair
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC[1-2] reboot"
    - ['P SSC[1-2] C !!!ready!!!']
  - - "SSC SSC[1-2] ble -R"
    - ['R SSC[1-2] C +BLE:']
  - - "SSC SSC2 gatts -S -z load -p 0xA0"
    - ['R SSC2 C +GATTS:StartService,OK,A000']
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ['R SSC2 C +BLEADV:SetAdv,OK']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - - "SSC SSC[1-2] blesmp -L -c [1,0]"
    - ['R SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC2 C +BLE:GattsConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BTSTK_SMP_08001
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP get bond list and number without bond device
  steps: |
    1. DUT1 get bond list
    2. DUT1 get bond number
  expected result: |
    1. succeed
    2. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -B -z getlist -n 1"
    - ['P SSC1 C +BLESMP:GetBondList,OK,0']
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,0']
- ID: BTSTK_SMP_08002
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP remove bond after connected
  steps: |
   1. DUT2 set AuthReqMode and RspKey
   2. pairing
   3. remove bond
  expected result: |
   1. Succeed
   2. Succeed
   3. Succeed
  cmd set:
  - ""
  - *config_bond_device
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:Start,OK']
  - *start_pair
  - - "SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>"
    - ['P SSC1 C +BLESMP:AuthComplete,Success,0','P SSC2 C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,1']
  - - "SSC SSC1 blesmp -B -z remove -r <dut2_bt_mac>"
    - ['P SSC1 RE "\+BLESMP:RemoveBond,Success,%%s"%%(<dut2_bt_mac>)']
- ID: BTSTK_SMP_08003
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP get bond list and number
  steps: |
   1. DUT2 set AuthReqMode and RspKey
   2. pairing
   3. get bong and remove bond
  expected result: |
   1. Succeed
   2. Succeed
   3. Succeed
  test environment: SSC_T5_1
  initial condition: BLE_INIT_SMP5
  cmd set:
  - ""
  - - "SSC SSC[2-5] blesmp -S -z AuthReqMode -v 0x01"
    - ['P SSC[2-5] C +BLESMP:OK']
  - - "SSC SSC[2-5] blesmp -S -z IOCAP -v 0x03"
    - ['P SSC[2-5] C +BLESMP:OK']
  - - "SSC SSC[2-5] blesmp -S -z RspKey -v 0x03"
    - ['P SSC[2-5] C +BLESMP:OK']
  - - LOOP 4 4 "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]"
    - ""
  - - "SSC SSC{%d} bleadv -D -z start"
    - ['R SSC{%d} C +BLEADV:Start,OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut{%d}_bt_mac>"
    - ['P SSC1 C +BLE:GattcConnect,OK', 'P SSC{%d} C +BLE:GattsConnect']
  - - "SSC SSC{%d} blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC1 C +BLESMP:SecReq']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut{%d}_bt_mac>"
    - ['P SSC1 C +BLESMP:AuthComplete,Success,0','P SSC{%d} C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 blesmp -B -z getlist -n 4"
    - ['P SSC1 C +BLESMP:GetBondList,OK,4']
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,4']
  - - "SSC SSC1 bleconn -D -z all"
    - ['R SSC1 C +BLECONN:']
  - - "SSC SSC1 blesmp -B -z remove -r <dut2_bt_mac>"
    - ['P SSC1 RE "\+BLESMP:RemoveBond,Success,%%s"%%(<dut2_bt_mac>)']
  - - "SSC SSC1 blesmp -B -z remove -r <dut3_bt_mac>"
    - ['P SSC1 RE "\+BLESMP:RemoveBond,Success,%%s"%%(<dut3_bt_mac>)']
- ID: BTSTK_SMP_08004
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP remove bond which not bond
  steps: |
   1. DUT1 remove bond
  expected result: |
   1. failed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -B -z remove -r <dut2_bt_mac>"
    - ['P SSC1 C +BLESMP:RemoveBond,Fail']