2017-03-26 18:01:52 -04:00
***** ***** ***** ***** ***** ***** *** *
Setup Linux Toolchain from Scratch
***** ***** ***** ***** ***** ***** *** *
2018-10-22 01:45:09 -04:00
.. note ::
Standard process for installing the toolchain is described :doc: `here <linux-setup>` . See :ref: `Customized Setup of Toolchain <get-started-customized-setup>` section for some of the reasons why installing the toolchain from scratch may be necessary.
2017-03-26 18:01:52 -04:00
Install Prerequisites
=====================
To compile with ESP-IDF you need to get the following packages:
- Ubuntu and Debian::
2018-09-07 02:44:19 -04:00
sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial
2017-03-26 18:01:52 -04:00
- Arch::
sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial
2018-08-15 03:52:07 -04:00
.. note ::
Some older (pre-2014) Linux distributions may use `` pyserial `` version 2.x which is not supported by ESP-IDF.
In this case please install a supported version via `` pip `` as it is described in section
:ref: `get-started-get-packages` .
2017-03-26 18:01:52 -04:00
Compile the Toolchain from Source
=================================
- Install dependencies:
- CentOS 7::
sudo yum install gawk gperf grep gettext ncurses-devel python python-devel automake bison flex texinfo help2man libtool
- Ubuntu pre-16.04::
sudo apt-get install gawk gperf grep gettext libncurses-dev python python-dev automake bison flex texinfo help2man libtool
- Ubuntu 16.04::
sudo apt-get install gawk gperf grep gettext python python-dev automake bison flex texinfo help2man libtool libtool-bin
2018-01-05 04:48:35 -05:00
- Debian 9::
2017-03-26 18:01:52 -04:00
2018-01-05 04:48:35 -05:00
sudo apt-get install gawk gperf grep gettext libncurses-dev python python-dev automake bison flex texinfo help2man libtool libtool-bin
2017-03-26 18:01:52 -04:00
- Arch::
TODO
2018-10-22 01:45:09 -04:00
Create the working directory and go into it::
mkdir -p ~/esp
cd ~/esp
2018-08-29 09:30:03 -04:00
Download `` crosstool-NG `` and build it:
2017-03-26 18:01:52 -04:00
2018-08-29 09:30:03 -04:00
.. include :: /_build/inc/scratch-build-code.inc
2017-03-26 18:01:52 -04:00
Build the toolchain::
./ct-ng xtensa-esp32-elf
./ct-ng build
chmod -R u+w builds/xtensa-esp32-elf
Toolchain will be built in `` ~/esp/crosstool-NG/builds/xtensa-esp32-elf `` . Follow :ref: `instructions for standard setup <setup-linux-toolchain-add-it-to-path>` to add the toolchain to your `` PATH `` .
Next Steps
==========
To carry on with development environment setup, proceed to section :ref: `get-started-get-esp-idf` .