esp-idf/tools/unit-test-app/sdkconfig.defaults

CONFIG_LOG_BOOTLOADER_LEVEL_WARN=y
CONFIG_ESPTOOLPY_BAUD_921600B=y
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=n
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_app.csv"
CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET=0x10000
CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_app.csv"
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
CONFIG_ESP32_XTAL_FREQ_AUTO=y
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=3
CONFIG_FREERTOS_USE_TRACE_FACILITY=y
CONFIG_HEAP_POISONING_COMPREHENSIVE=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y
CONFIG_MBEDTLS_HARDWARE_SHA=y
CONFIG_SPI_FLASH_ENABLE_COUNTERS=y
CONFIG_ULP_COPROC_ENABLED=y
CONFIG_TASK_WDT=n
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS=y
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=7
CONFIG_STACK_CHECK_STRONG=y
CONFIG_STACK_CHECK=y
CONFIG_SUPPORT_STATIC_ALLOCATION=y
CONFIG_ESP_TIMER_PROFILING=y
CONFIG_ADC2_DISABLE_DAC=n
CONFIG_WARN_WRITE_STRINGS=y
CONFIG_SPI_MASTER_IN_IRAM=y
unit-test-app: new targets for building different configurations 2017-09-12 13:40:54 -04:00			`CONFIG_LOG_BOOTLOADER_LEVEL_WARN=y`
			`CONFIG_ESPTOOLPY_BAUD_921600B=y`
unit test app: Require 4MB flash PSRAM config unit tests had outgrown the 0x14000 byte allocated factory size. 2018-05-24 22:16:26 -04:00			`CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y`
unit-test-app: new targets for building different configurations 2017-09-12 13:40:54 -04:00			`CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=n`
			`CONFIG_PARTITION_TABLE_CUSTOM=y`
			`CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_app.csv"`
			`CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET=0x10000`
			`CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_app.csv"`
			`CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y`
			`CONFIG_ESP32_XTAL_FREQ_AUTO=y`
			`CONFIG_FREERTOS_HZ=1000`
			`CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y`
			`CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=3`
freertos/make trace facility configurable This commit makes configUSE_TRACE_FACILITY and configUSE_STATS_FORMATTING_FUNCTIONS configurable in kconfig. Test cases fro the functions enabled by the two configurations above have also been added. Test cases for the following functions have been added... - uxTaskGetSystemState() - uxTaskGetTaskNumber() - vTaskSetTaskNumber() - xEventGroupClearBitsFromISR() - xEventGroupSetBitsFromISR() - uxEventGroupGetNumber() - uxQueueGetQueueNumber() - vQueueSetQueueNumber() - ucQueueGetQueueType() Test cases for the following functions were not required... - prvListTaskWithinSingleList() - prvWriteNameToBuffer() - vTaskList() 2017-09-28 00:33:53 -04:00			`CONFIG_FREERTOS_USE_TRACE_FACILITY=y`
unit-test-app: new targets for building different configurations 2017-09-12 13:40:54 -04:00			`CONFIG_HEAP_POISONING_COMPREHENSIVE=y`
			`CONFIG_MBEDTLS_HARDWARE_MPI=y`
			`CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y`
			`CONFIG_MBEDTLS_HARDWARE_SHA=y`
			`CONFIG_SPI_FLASH_ENABLE_COUNTERS=y`
			`CONFIG_ULP_COPROC_ENABLED=y`
			`CONFIG_TASK_WDT=n`
spi_flash: Abort on writes to dangerous regions (bootloader, partition table, app) Can be disabled or made into a failure result in kconfig if needed. 2017-10-25 03:22:30 -04:00			`CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS=y`
FreeRTOS/make Queue Registry and Run Time Stats configurable This commit makes the configQUEUE_REGISTRY_SIZE and configGENERATE_RUN_TIME_STATS configurable in menuconfig. - configQUEUE_REGISTRY_SIZE can now be set in menuconfig. - The functions vQueueAddToRegistry() and vQueueUnregisterQueue() were made SMP compatbile - pcQueueGetName() was backported from FreeRTOS v9.0.0 - Added test case for Queue Registry functions - configGENERATE_RUN_TIME_STATS can now be enabled in menuconfig. CCOUNT or esp_timer can be selected as the FreeRTOS run time clock in menuconfig as well, although CCOUNT will overflow quickly. - Run time stats collection (in vTaskSwitchContext) and generation (in uxTaskGetSystemState) have been made SMP compatible. Therefore vTaskGetRunTimeStats() now displays the run time usage of each task as a percentage of total runtime of both CPUs Squash 2017-10-30 04:03:56 -04:00			`CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=7`
esp32: Adds Stack Smashing Protection Feature These changes add posibility to enable GCC stack protector via menuconfig for all source files in project. 2017-11-15 03:09:54 -05:00			`CONFIG_STACK_CHECK_STRONG=y`
			`CONFIG_STACK_CHECK=y`
freertos/backport and test v9.0.0 functions This commit backports the following features from FreeRTOS v9.0.0 - uxSemaphoreGetCount() - vTimerSetTimerId(), xTimerGetPeriod(), xTimerGetExpiryTime() - xTimerCreateStatic() - xEventGroupCreateStatic() - uxSemaphoreGetCount() Functions backported previously - xTaskCreateStatic() - xQueueCreateStatic() - xSemaphoreCreateBinaryStatic(), xSemaphoreCreateCountingStatic() - xSemaphoreCreateMutexStatic(), xSemaphoreCreateRecursiveMutexStatic() - pcQueueGetName() - vTaskSetThreadLocalStoragePointer() - pvTaskGetThreadLocalStoragePointer() Unit tests were also written for the functions above (except for pcQueueGetName which is tested in a separate Queue Registry MR). The original tlsp and del cb test case was deleted and integrated into the test cases of this MR. 2017-10-20 07:03:01 -04:00			`CONFIG_SUPPORT_STATIC_ALLOCATION=y`
esp_timer: add documentation, expose profiling option in Kconfig 2017-11-24 05:51:37 -05:00			`CONFIG_ESP_TIMER_PROFILING=y`
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion. refactor structure of ``rtc_module.c`` to make it more clearly. Closes https://github.com/espressif/esp-idf/issues/1517 2018-01-24 05:46:34 -05:00			`CONFIG_ADC2_DISABLE_DAC=n`
Enable -Wwrite-strings when compiling IDF's own C files 2018-04-06 10:04:13 -04:00			`CONFIG_WARN_WRITE_STRINGS=y`
feature(spi_master): allow to place functions into IRAM to get higher efficiency 2018-06-11 07:54:18 -04:00			`CONFIG_SPI_MASTER_IN_IRAM=y`