esp-idf/components/driver/spi_common.c

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.


#include <string.h>
#include "driver/spi_master.h"
#include "soc/spi_periph.h"
#include "esp32/rom/ets_sys.h"
#include "esp_types.h"
#include "esp_attr.h"
#include "esp_log.h"
#include "esp_err.h"
#include "soc/soc.h"
#include "soc/dport_reg.h"
#include "soc/lldesc.h"
#include "driver/gpio.h"
#include "driver/periph_ctrl.h"
#include "esp_heap_caps.h"
#include "driver/spi_common.h"
#include "stdatomic.h"
#include "hal/spi_hal.h"

static const char *SPI_TAG = "spi";

#define SPI_CHECK(a, str, ret_val) do { \
    if (!(a)) { \
        ESP_LOGE(SPI_TAG,"%s(%d): %s", __FUNCTION__, __LINE__, str); \
        return (ret_val); \
    } \
    } while(0)

#define SPI_CHECK_PIN(pin_num, pin_name, check_output) if (check_output) { \
            SPI_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(pin_num), pin_name" not valid", ESP_ERR_INVALID_ARG); \
        } else { \
            SPI_CHECK(GPIO_IS_VALID_GPIO(pin_num), pin_name" not valid", ESP_ERR_INVALID_ARG); \
        }


typedef struct spi_device_t spi_device_t;

#define FUNC_GPIO   PIN_FUNC_GPIO

#define DMA_CHANNEL_ENABLED(dma_chan)    (BIT(dma_chan-1))

//Periph 1 is 'claimed' by SPI flash code.
static atomic_bool spi_periph_claimed[SOC_SPI_PERIPH_NUM] = { ATOMIC_VAR_INIT(true), ATOMIC_VAR_INIT(false), ATOMIC_VAR_INIT(false),
};
static const char* spi_claiming_func[3] = {NULL, NULL, NULL};
static uint8_t spi_dma_chan_enabled = 0;
static portMUX_TYPE spi_dma_spinlock = portMUX_INITIALIZER_UNLOCKED;


//Returns true if this peripheral is successfully claimed, false if otherwise.
bool spicommon_periph_claim(spi_host_device_t host, const char* source)
{
    bool false_var = false;
    bool ret = atomic_compare_exchange_strong(&spi_periph_claimed[host], &false_var, true);
    if (ret) {
        spi_claiming_func[host] = source;
        periph_module_enable(spi_periph_signal[host].module);
    } else {
        ESP_EARLY_LOGE(SPI_TAG, "SPI%d already claimed by %s.", host+1, spi_claiming_func[host]);
    }
    return ret;
}

bool spicommon_periph_in_use(spi_host_device_t host)
{
    return atomic_load(&spi_periph_claimed[host]);
}

//Returns true if this peripheral is successfully freed, false if otherwise.
bool spicommon_periph_free(spi_host_device_t host)
{
    bool true_var = true;
    bool ret = atomic_compare_exchange_strong(&spi_periph_claimed[host], &true_var, false);
    if (ret) periph_module_disable(spi_periph_signal[host].module);
    return ret;
}


int spicommon_irqsource_for_host(spi_host_device_t host)
{
    return spi_periph_signal[host].irq;
}

int spicommon_irqdma_source_for_host(spi_host_device_t host)
{
    return spi_periph_signal[host].irq_dma;
}

static inline uint32_t get_dma_periph(int dma_chan)
{
    return PERIPH_SPI_DMA_MODULE;
}

bool spicommon_dma_chan_claim (int dma_chan)
{
    bool ret = false;
    assert(dma_chan >= 1 && dma_chan <= SOC_SPI_DMA_CHAN_NUM);

    portENTER_CRITICAL(&spi_dma_spinlock);
    if ( !(spi_dma_chan_enabled & DMA_CHANNEL_ENABLED(dma_chan)) ) {
        // get the channel only when it's not claimed yet.
        spi_dma_chan_enabled |= DMA_CHANNEL_ENABLED(dma_chan);
        ret = true;
    }
    periph_module_enable(get_dma_periph(dma_chan));
    portEXIT_CRITICAL(&spi_dma_spinlock);

    return ret;
}

bool spicommon_dma_chan_in_use(int dma_chan)
{
    assert(dma_chan==1 || dma_chan == 2);
    return spi_dma_chan_enabled & DMA_CHANNEL_ENABLED(dma_chan);
}

bool spicommon_dma_chan_free(int dma_chan)
{
    assert( dma_chan == 1 || dma_chan == 2 );
    assert( spi_dma_chan_enabled & DMA_CHANNEL_ENABLED(dma_chan) );

    portENTER_CRITICAL(&spi_dma_spinlock);
    spi_dma_chan_enabled &= ~DMA_CHANNEL_ENABLED(dma_chan);
    if ( spi_dma_chan_enabled == 0 ) {
        //disable the DMA only when all the channels are freed.
        periph_module_disable(get_dma_periph(dma_chan));
    }
    portEXIT_CRITICAL(&spi_dma_spinlock);

    return true;
}

static bool bus_uses_iomux_pins(spi_host_device_t host, const spi_bus_config_t* bus_config)
{
    if (bus_config->sclk_io_num>=0 &&
        bus_config->sclk_io_num != spi_periph_signal[host].spiclk_iomux_pin) return false;
    if (bus_config->quadwp_io_num>=0 &&
        bus_config->quadwp_io_num != spi_periph_signal[host].spiwp_iomux_pin) return false;
    if (bus_config->quadhd_io_num>=0 &&
        bus_config->quadhd_io_num != spi_periph_signal[host].spihd_iomux_pin) return false;
    if (bus_config->mosi_io_num >= 0 &&
        bus_config->mosi_io_num != spi_periph_signal[host].spid_iomux_pin) return false;
    if (bus_config->miso_io_num>=0 &&
        bus_config->miso_io_num != spi_periph_signal[host].spiq_iomux_pin) return false;

    return true;
}

/*
Do the common stuff to hook up a SPI host to a bus defined by a bunch of GPIO pins. Feed it a host number and a
bus config struct and it'll set up the GPIO matrix and enable the device. If a pin is set to non-negative value,
it should be able to be initialized.
*/
esp_err_t spicommon_bus_initialize_io(spi_host_device_t host, const spi_bus_config_t *bus_config, int dma_chan, uint32_t flags, uint32_t* flags_o)
{
    uint32_t temp_flag=0;

    bool miso_need_output;
    bool mosi_need_output;
    bool sclk_need_output;
    if ((flags&SPICOMMON_BUSFLAG_MASTER) != 0) {
        //initial for master
        miso_need_output = ((flags&SPICOMMON_BUSFLAG_DUAL) != 0) ? true : false;
        mosi_need_output = true;
        sclk_need_output = true;
    } else {
        //initial for slave
        miso_need_output = true;
        mosi_need_output = ((flags&SPICOMMON_BUSFLAG_DUAL) != 0) ? true : false;
        sclk_need_output = false;
    }

    const bool wp_need_output = true;
    const bool hd_need_output = true;

    //check pin capabilities
    if (bus_config->sclk_io_num>=0) {
        temp_flag |= SPICOMMON_BUSFLAG_SCLK;
        SPI_CHECK_PIN(bus_config->sclk_io_num, "sclk", sclk_need_output);
    }
    if (bus_config->quadwp_io_num>=0) {
        SPI_CHECK_PIN(bus_config->quadwp_io_num, "wp", wp_need_output);
    }
    if (bus_config->quadhd_io_num>=0) {
        SPI_CHECK_PIN(bus_config->quadhd_io_num, "hd", hd_need_output);
    }
    //set flags for QUAD mode according to the existence of wp and hd
    if (bus_config->quadhd_io_num >= 0 && bus_config->quadwp_io_num >= 0) temp_flag |= SPICOMMON_BUSFLAG_WPHD;
    if (bus_config->mosi_io_num >= 0) {
        temp_flag |= SPICOMMON_BUSFLAG_MOSI;
        SPI_CHECK_PIN(bus_config->mosi_io_num, "mosi", mosi_need_output);
    }
    if (bus_config->miso_io_num>=0) {
        temp_flag |= SPICOMMON_BUSFLAG_MISO;
        SPI_CHECK_PIN(bus_config->miso_io_num, "miso", miso_need_output);
    }
    //set flags for DUAL mode according to output-capability of MOSI and MISO pins.
    if ( (bus_config->mosi_io_num < 0 || GPIO_IS_VALID_OUTPUT_GPIO(bus_config->mosi_io_num)) &&
        (bus_config->miso_io_num < 0 || GPIO_IS_VALID_OUTPUT_GPIO(bus_config->miso_io_num)) ) {
        temp_flag |= SPICOMMON_BUSFLAG_DUAL;
    }

    //check if the selected pins correspond to the iomux pins of the peripheral
    bool use_iomux = bus_uses_iomux_pins(host, bus_config);
    if (use_iomux) temp_flag |= SPICOMMON_BUSFLAG_IOMUX_PINS;

    uint32_t missing_flag = flags & ~temp_flag;
    missing_flag &= ~SPICOMMON_BUSFLAG_MASTER;//don't check this flag

    if (missing_flag != 0) {
    //check pins existence
        if (missing_flag & SPICOMMON_BUSFLAG_SCLK) ESP_LOGE(SPI_TAG, "sclk pin required.");
        if (missing_flag & SPICOMMON_BUSFLAG_MOSI) ESP_LOGE(SPI_TAG, "mosi pin required.");
        if (missing_flag & SPICOMMON_BUSFLAG_MISO) ESP_LOGE(SPI_TAG, "miso pin required.");
        if (missing_flag & SPICOMMON_BUSFLAG_DUAL) ESP_LOGE(SPI_TAG, "not both mosi and miso output capable");
        if (missing_flag & SPICOMMON_BUSFLAG_WPHD) ESP_LOGE(SPI_TAG, "both wp and hd required.");
        if (missing_flag & SPICOMMON_BUSFLAG_IOMUX_PINS) ESP_LOGE(SPI_TAG, "not using iomux pins");
        SPI_CHECK(missing_flag == 0, "not all required capabilities satisfied.", ESP_ERR_INVALID_ARG);
    }

    if (use_iomux) {
        //All SPI iomux pin selections resolve to 1, so we put that here instead of trying to figure
        //out which FUNC_GPIOx_xSPIxx to grab; they all are defined to 1 anyway.
        ESP_LOGD(SPI_TAG, "SPI%d use iomux pins.", host+1);
        if (bus_config->mosi_io_num >= 0) {
            gpio_iomux_in(bus_config->mosi_io_num, spi_periph_signal[host].spid_in);
            gpio_iomux_out(bus_config->mosi_io_num, spi_periph_signal[host].func, false);
        }
        if (bus_config->miso_io_num >= 0) {
            gpio_iomux_in(bus_config->miso_io_num, spi_periph_signal[host].spiq_in);
            gpio_iomux_out(bus_config->miso_io_num, spi_periph_signal[host].func, false);
        }
        if (bus_config->quadwp_io_num >= 0) {
            gpio_iomux_in(bus_config->quadwp_io_num, spi_periph_signal[host].spiwp_in);
            gpio_iomux_out(bus_config->quadwp_io_num, spi_periph_signal[host].func, false);
        }
        if (bus_config->quadhd_io_num >= 0) {
            gpio_iomux_in(bus_config->quadhd_io_num, spi_periph_signal[host].spihd_in);
            gpio_iomux_out(bus_config->quadhd_io_num, spi_periph_signal[host].func, false);
        }
        if (bus_config->sclk_io_num >= 0) {
            gpio_iomux_in(bus_config->sclk_io_num, spi_periph_signal[host].spiclk_in);
            gpio_iomux_out(bus_config->sclk_io_num, spi_periph_signal[host].func, false);
        }
        temp_flag |= SPICOMMON_BUSFLAG_IOMUX_PINS;
    } else {
        //Use GPIO matrix
        ESP_LOGD(SPI_TAG, "SPI%d use gpio matrix.", host+1);
        if (bus_config->mosi_io_num >= 0) {
            if (mosi_need_output || (temp_flag&SPICOMMON_BUSFLAG_DUAL)) {
                gpio_set_direction(bus_config->mosi_io_num, GPIO_MODE_INPUT_OUTPUT);
                gpio_matrix_out(bus_config->mosi_io_num, spi_periph_signal[host].spid_out, false, false);
            } else {
                gpio_set_direction(bus_config->mosi_io_num, GPIO_MODE_INPUT);
            }
            gpio_matrix_in(bus_config->mosi_io_num, spi_periph_signal[host].spid_in, false);
            PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[bus_config->mosi_io_num], FUNC_GPIO);
        }
        if (bus_config->miso_io_num >= 0) {
            if (miso_need_output || (temp_flag&SPICOMMON_BUSFLAG_DUAL)) {
                gpio_set_direction(bus_config->miso_io_num, GPIO_MODE_INPUT_OUTPUT);
                gpio_matrix_out(bus_config->miso_io_num, spi_periph_signal[host].spiq_out, false, false);
            } else {
                gpio_set_direction(bus_config->miso_io_num, GPIO_MODE_INPUT);
            }
            gpio_matrix_in(bus_config->miso_io_num, spi_periph_signal[host].spiq_in, false);
            PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[bus_config->miso_io_num], FUNC_GPIO);
        }
        if (bus_config->quadwp_io_num >= 0) {
            gpio_set_direction(bus_config->quadwp_io_num, GPIO_MODE_INPUT_OUTPUT);
            gpio_matrix_out(bus_config->quadwp_io_num, spi_periph_signal[host].spiwp_out, false, false);
            gpio_matrix_in(bus_config->quadwp_io_num, spi_periph_signal[host].spiwp_in, false);
            PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[bus_config->quadwp_io_num], FUNC_GPIO);
        }
        if (bus_config->quadhd_io_num >= 0) {
            gpio_set_direction(bus_config->quadhd_io_num, GPIO_MODE_INPUT_OUTPUT);
            gpio_matrix_out(bus_config->quadhd_io_num, spi_periph_signal[host].spihd_out, false, false);
            gpio_matrix_in(bus_config->quadhd_io_num, spi_periph_signal[host].spihd_in, false);
            PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[bus_config->quadhd_io_num], FUNC_GPIO);
        }
        if (bus_config->sclk_io_num >= 0) {
            if (sclk_need_output) {
                gpio_set_direction(bus_config->sclk_io_num, GPIO_MODE_INPUT_OUTPUT);
                gpio_matrix_out(bus_config->sclk_io_num, spi_periph_signal[host].spiclk_out, false, false);
            } else {
                gpio_set_direction(bus_config->sclk_io_num, GPIO_MODE_INPUT);
            }
            gpio_matrix_in(bus_config->sclk_io_num, spi_periph_signal[host].spiclk_in, false);
            PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[bus_config->sclk_io_num], FUNC_GPIO);
        }
    }

    //Select DMA channel.
    DPORT_SET_PERI_REG_BITS(DPORT_SPI_DMA_CHAN_SEL_REG, 3, dma_chan, (host * 2));

    if (flags_o) *flags_o = temp_flag;
    return ESP_OK;
}

esp_err_t spicommon_bus_free_io_cfg(const spi_bus_config_t *bus_cfg)
{
    int pin_array[] = {
        bus_cfg->mosi_io_num,
        bus_cfg->miso_io_num,
        bus_cfg->sclk_io_num,
        bus_cfg->quadwp_io_num,
        bus_cfg->quadhd_io_num,
    };
    for (int i = 0; i < sizeof(pin_array)/sizeof(int); i ++) {
        const int io = pin_array[i];
        if (io >= 0 && GPIO_IS_VALID_GPIO(io)) gpio_reset_pin(io);
    }
    return ESP_OK;
}

void spicommon_cs_initialize(spi_host_device_t host, int cs_io_num, int cs_num, int force_gpio_matrix)
{
    if (!force_gpio_matrix && cs_io_num == spi_periph_signal[host].spics0_iomux_pin && cs_num == 0) {
        //The cs0s for all SPI peripherals map to pin mux source 1, so we use that instead of a define.
        gpio_iomux_in(cs_io_num, spi_periph_signal[host].spics_in);
        gpio_iomux_out(cs_io_num, spi_periph_signal[host].func, false);
    } else {
        //Use GPIO matrix
        if (GPIO_IS_VALID_OUTPUT_GPIO(cs_io_num)) {
            gpio_set_direction(cs_io_num, GPIO_MODE_INPUT_OUTPUT);
            gpio_matrix_out(cs_io_num, spi_periph_signal[host].spics_out[cs_num], false, false);
        } else {
            gpio_set_direction(cs_io_num, GPIO_MODE_INPUT);
        }
        if (cs_num == 0) gpio_matrix_in(cs_io_num, spi_periph_signal[host].spics_in, false);
        PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[cs_io_num], FUNC_GPIO);
    }
}

void spicommon_cs_free_io(int cs_gpio_num)
{
    assert(cs_gpio_num>=0 && GPIO_IS_VALID_GPIO(cs_gpio_num));
    gpio_reset_pin(cs_gpio_num);
}

bool spicommon_bus_using_iomux(spi_host_device_t host)
{
#define CHECK_IOMUX_PIN(HOST, PIN_NAME) if (GPIO.func_in_sel_cfg[spi_periph_signal[(HOST)].PIN_NAME##_in].sig_in_sel) return false

    CHECK_IOMUX_PIN(host, spid);
    CHECK_IOMUX_PIN(host, spiq);
    CHECK_IOMUX_PIN(host, spiwp);
    CHECK_IOMUX_PIN(host, spihd);
    return true;
}

/*
Code for workaround for DMA issue in ESP32 v0/v1 silicon
*/


static volatile int dmaworkaround_channels_busy[2] = {0, 0};
static dmaworkaround_cb_t dmaworkaround_cb;
static void *dmaworkaround_cb_arg;
static portMUX_TYPE dmaworkaround_mux = portMUX_INITIALIZER_UNLOCKED;
static int dmaworkaround_waiting_for_chan = 0;

bool IRAM_ATTR spicommon_dmaworkaround_req_reset(int dmachan, dmaworkaround_cb_t cb, void *arg)
{
    int otherchan = (dmachan == 1) ? 2 : 1;
    bool ret;
    portENTER_CRITICAL_ISR(&dmaworkaround_mux);
    if (dmaworkaround_channels_busy[otherchan-1]) {
        //Other channel is busy. Call back when it's done.
        dmaworkaround_cb = cb;
        dmaworkaround_cb_arg = arg;
        dmaworkaround_waiting_for_chan = otherchan;
        ret = false;
    } else {
        //Reset DMA
        periph_module_reset( PERIPH_SPI_DMA_MODULE );
        ret = true;
    }
    portEXIT_CRITICAL_ISR(&dmaworkaround_mux);
    return ret;
}

bool IRAM_ATTR spicommon_dmaworkaround_reset_in_progress()
{
    return (dmaworkaround_waiting_for_chan != 0);
}

void IRAM_ATTR spicommon_dmaworkaround_idle(int dmachan)
{
    portENTER_CRITICAL_ISR(&dmaworkaround_mux);
    dmaworkaround_channels_busy[dmachan-1] = 0;
    if (dmaworkaround_waiting_for_chan == dmachan) {
        //Reset DMA
        periph_module_reset( PERIPH_SPI_DMA_MODULE );
        dmaworkaround_waiting_for_chan = 0;
        //Call callback
        dmaworkaround_cb(dmaworkaround_cb_arg);

    }
    portEXIT_CRITICAL_ISR(&dmaworkaround_mux);
}

void IRAM_ATTR spicommon_dmaworkaround_transfer_active(int dmachan)
{
    portENTER_CRITICAL_ISR(&dmaworkaround_mux);
    dmaworkaround_channels_busy[dmachan-1] = 1;
    portEXIT_CRITICAL_ISR(&dmaworkaround_mux);
}