esp-idf/examples/peripherals/usb/host/cdc/cdc_acm_vcp/README.md

| Supported Targets | ESP32-S2 | ESP32-S3 |
| ----------------- | -------- | -------- |

# USB CDC-ACM Virtual COM Port example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example shows how to extend CDC-ACM driver for Virtual Communication Port (VCP) devices,
such as CP210x, FTDI FT23x or CH34x devices.

The drivers are fetched from [IDF Component Registry](https://components.espressif.com/) together with VCP service that automatically loads correct driver for plugged-in device.

## How to use example

1. Connect your USB<->UART converter to ESP32-S2/S3, the device will be automatically enumerated and correct driver will be loaded
2. Change baudrate and other line coding parameters in [cdc_acm_vcp_example_main.cpp](main/cdc_acm_vcp_example_main.cpp) to match your needs
3. Now you can use the usual CDC-ACM API to control the device and send data. Data are received in `handle_rx` callback
4. Try disconnecting and then reconnecting of the USB device to experiment with USB hotplugging

### Hardware Required

* ESP board with USB-OTG supported
* Silicon Labs CP210x, FTDI FT23x or CP34x USB to UART converter

Connect USB_D+, USB_D-, GND and +5V signals of your ESP chip to matching signals on USB to UART converter.

#### Pin Assignment

See common pin assignments for USB Device examples from [upper level](../../../README.md#common-pin-assignments).

### Build and Flash

Build this project and flash it to the USB host board, then run monitor tool to view serial output:

```bash
idf.py -p PORT flash monitor
```

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type ``Ctrl-]``.)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
usb_host: Add Virtual COM Port CDC example This example implements usual UART/USB convertor driver. Closes https://github.com/espressif/esp-idf/issues/8645 2022-03-23 12:23:08 -04:00			`\| Supported Targets \| ESP32-S2 \| ESP32-S3 \|`
			`\| ----------------- \| -------- \| -------- \|`

usb: Update host CDC examples 2023-03-19 07:27:51 -04:00			`# USB CDC-ACM Virtual COM Port example`
usb_host: Add Virtual COM Port CDC example This example implements usual UART/USB convertor driver. Closes https://github.com/espressif/esp-idf/issues/8645 2022-03-23 12:23:08 -04:00
			`(See the README.md file in the upper level 'examples' directory for more information about examples.)`

usb: Update host CDC examples 2023-03-19 07:27:51 -04:00			`This example shows how to extend CDC-ACM driver for Virtual Communication Port (VCP) devices,`
			`such as CP210x, FTDI FT23x or CH34x devices.`

			`The drivers are fetched from [IDF Component Registry](https://components.espressif.com/) together with VCP service that automatically loads correct driver for plugged-in device.`
usb_host: Add Virtual COM Port CDC example This example implements usual UART/USB convertor driver. Closes https://github.com/espressif/esp-idf/issues/8645 2022-03-23 12:23:08 -04:00
			`## How to use example`

usb: Update host CDC examples 2023-03-19 07:27:51 -04:00			`1. Connect your USB<->UART converter to ESP32-S2/S3, the device will be automatically enumerated and correct driver will be loaded`
			`2. Change baudrate and other line coding parameters in [cdc_acm_vcp_example_main.cpp](main/cdc_acm_vcp_example_main.cpp) to match your needs`
			3. Now you can use the usual CDC-ACM API to control the device and send data. Data are received in `handle_rx` callback
usb_host: Add Virtual COM Port CDC example This example implements usual UART/USB convertor driver. Closes https://github.com/espressif/esp-idf/issues/8645 2022-03-23 12:23:08 -04:00			`4. Try disconnecting and then reconnecting of the USB device to experiment with USB hotplugging`

			`### Hardware Required`

			`* ESP board with USB-OTG supported`
usb: Update host CDC examples 2023-03-19 07:27:51 -04:00			`* Silicon Labs CP210x, FTDI FT23x or CP34x USB to UART converter`
usb_host: Add Virtual COM Port CDC example This example implements usual UART/USB convertor driver. Closes https://github.com/espressif/esp-idf/issues/8645 2022-03-23 12:23:08 -04:00
			`Connect USB_D+, USB_D-, GND and +5V signals of your ESP chip to matching signals on USB to UART converter.`

			`#### Pin Assignment`

			`See common pin assignments for USB Device examples from [upper level](../../../README.md#common-pin-assignments).`

			`### Build and Flash`

			`Build this project and flash it to the USB host board, then run monitor tool to view serial output:`

			```bash
			`idf.py -p PORT flash monitor`
			```

			`(Replace PORT with the name of the serial port to use.)`

			(To exit the serial monitor, type ``Ctrl-]``.)

			`See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.`