esp-idf/components/xtensa/trax/test/README.txt

9 lines
381 B
Plaintext
Raw Normal View History

Instructions for running the test:
1. Connect an ESP32 board with JTAG adapter (WROVER-KIT, ETHERNET-KIT)
2. Set up the environment (this can be done by export.sh)
- Add ESP32 toolchain to PATH, and check that GDB has been built with Python support
- Add OpenOCD to PATH and set OPENOCD_SCRIPTS
- Set IDF_PATH
3. Run `make flash test`. Check that "Test pass" is printed.