mirror of
https://github.com/nopnop2002/esp-idf-ssd1306.git
synced 2024-10-03 18:18:47 -04:00
68 lines
2.5 KiB
Markdown
68 lines
2.5 KiB
Markdown
|
# MouseIconDemo for SSD1306
|
||
|
|
Demo of changing images using the mouse.
|
||
|
|
I used [this](https://github.com/espressif/esp-idf/tree/master/examples/peripherals/usb/host/hid) as a reference.
|
||
|
|
|
||
|
|
The image changes according to mouse clicks.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
I borrowed the BIT MAP data from here.
|
||
|
|
https://thenounproject.com/icon/mouse-6617048/
|
||
|
|
|
||
|
|
# Hardware requirements
|
||
|
|
|
||
|
|
- ESP32S2/S3
|
||
|
|
These have USB-HOST functionality.
|
||
|
|
|
||
|
|
- USB Connector
|
||
|
|
I used this:
|
||
|
|
|
||
|
|
|
||
|
|
- USB mouse
|
||
|
|
2-button or 3-button usb mouse.
|
||
|
|
|
||
|
|
# USB wiring
|
||
|
|
To stabilize the power supply, I placed a 100uF electrolytic capacitor between 5V and GND.
|
||
|
|
```
|
||
|
|
ESP32-S2/S3 BOARD USB CONNECTOR
|
||
|
|
+--+
|
||
|
|
[ 5V ] +---------> | || VCC
|
||
|
|
[GPIO 19] |---------> | || D-
|
||
|
|
[GPIO 20] |---------> | || D+
|
||
|
|
[ GND ] |--------+> | || GND
|
||
|
|
| | +--+
|
||
|
|
+---||---+
|
||
|
|
100uF
|
||
|
|
```
|
||
|
|
|
||
|
|
# USB hot socket
|
||
|
|
There are times when it works correctly and times when it doesn't.
|
||
|
|
It works more stably if you connect before starting the firmware.
|
||
|
|
When it works correctly, a log like this will be displayed.
|
||
|
|
```
|
||
|
|
I (1166) usb_hid: hid_host_device_callback
|
||
|
|
I (1166) usb_hid: HID Device, protocol 'MOUSE' CONNECTED
|
||
|
|
```
|
||
|
|
|
||
|
|
# Using USB-HUB
|
||
|
|
I tried it, but it doesn't work properly via USB-HUB.
|
||
|
|
|
||
|
|
# Transfer failed error
|
||
|
|
For some reason, the following error may occur in rare cases.
|
||
|
|
This error occurs within [this](https://components.espressif.com/components/espressif/usb_host_hid) component.
|
||
|
|
It is unclear whether it is a component bug or an effect of electrical noise.
|
||
|
|
Some kind of stabilization circuitry may be required.
|
||
|
|
It may come back to life if you unplugging the mouse and plugging it again.
|
||
|
|
I would like to hear the opinion of someone who is familiar with USB electrical circuits.
|
||
|
|
```
|
||
|
|
E (12287696) hid-host: Transfer failed, status 1
|
||
|
|
E (12287696) usb_hid: HID Device, protocol 'MOUSE' TRANSFER_ERROR
|
||
|
|
E (15953516) USBH: Device 1 gone
|
||
|
|
```
|
||
|
|
|
||
|
|
# Keyboard with mouse function
|
||
|
|
I have a keyboard with mouse functionality, but the keyboard with mouse functionality does not work as a mouse.
|
||
|
|
See [here](https://github.com/espressif/esp-idf/issues/12667).
|
||
|
|
|