mirror of https://github.com/Matiasus/SSD1306.git synced 2024-09-19 09:36:01 -04:00

C library for SSD1306 OLED Driver

Go to file

matiasus a6739f6a08 Testing new functions		2022-12-08 22:37:11 +01:00
img	Delete ssd13006_v20.png	2021-07-21 07:01:43 +02:00
lib	Testing new functions	2022-12-08 22:37:11 +01:00
.gitignore	Modification	2022-11-22 20:38:14 +01:00
LICENSE	Initial commit	2020-10-13 10:44:23 +02:00
main.c	Testing new functions	2022-12-08 22:37:11 +01:00
Makefile	Modification	2022-11-22 20:38:14 +01:00
README.md	More specified version 2.0	2021-07-21 07:34:08 +02:00

README.md

C Library for SSD1306 0.96" OLED display

SSD1306 Description

Detailed information are described in Datasheet SSD1306.

Library

C library is aimed for driving 0.96" OLED display with SSD1306 driver 128x64 through TWI's Atmega328p.

Versions

1.0 - basic functions. The first publication.
2.0 - more changes:
- rebuild to cacheMemLcd array. It means that every request is stored in cache array and then is depicted on the display by function SSD1306_UpdateScreen (uint8_t).
- Added new function -> SSD1306_DrawLine (uint8_t, uint8_t, uint8_t, uint8_t). Possible depicted any line (horizontal, vertical, with slope).
- Possible to use for more than 1 display (not tested, cause displays that I have avialable had the same addresses).

Dependencies

Font.c can be modified according to application requirements with form defined in font.c. Maximal permissible horizontal dimension is 8 bits.

Usage

Prior defined for MCU Atmega328p / Atmega8 / Atmega16. Need to be carefull with TWI ports definition.

PORT	Atmega16	Atmega8 / Atmega328
SCL	PC0	PC5
SDA	PC1	PC4

Tested

Library was tested and proved on 0.96″ OLED Display with SSD1306 driver and Atmega328p.

Init OLED Sequence

Init sequence OLED display was defined according to page 64 (next to last page) of Datasheet SSD1306.

// +---------------------------+
// |      Set MUX Ratio        |
// +---------------------------+
// |        0xA8, 0x3F         |
// +---------------------------+
//              |
// +---------------------------+
// |    Set Display Offset     |
// +---------------------------+
// |        0xD3, 0x00         |
// +---------------------------+
//              |
// +---------------------------+
// |  Set Display Start Line   |
// +---------------------------+
// |          0x40             |
// +---------------------------+
//              |
// +---------------------------+
// |     Set Segment Remap     |
// +---------------------------+
// |       0xA0 / 0xA1         |
// +---------------------------+
//              |
// +---------------------------+
// |   Set COM Output Scan     |
// |        Direction          |
// +---------------------------+
// |       0xC0 / 0xC8         |
// +---------------------------+
//              |
// +---------------------------+
// |   Set COM Pins hardware   |
// |       configuration       |
// +---------------------------+
// |        0xDA, 0x02         |
// +---------------------------+
//              |
// +---------------------------+
// |   Set Contrast Control    |
// +---------------------------+
// |        0x81, 0x7F         |
// +---------------------------+
//              |
// +---------------------------+
// | Disable Entire Display On |
// +---------------------------+
// |          0xA4             |
// +---------------------------+
//              |
// +---------------------------+
// |    Set Normal Display     |
// +---------------------------+
// |          0xA6             |
// +---------------------------+
//              |
// +---------------------------+
// |    Set Osc Frequency      |
// +---------------------------+
// |       0xD5, 0x80          |
// +---------------------------+
//              |
// +---------------------------+
// |    Enable charge pump     |
// |        regulator          |
// +---------------------------+
// |       0x8D, 0x14          |
// +---------------------------+
//              |
// +---------------------------+
// |        Display On         |
// +---------------------------+
// |          0xAF             |
// +---------------------------+

Functions

SSD1306_Init (uint8_t) - Init display
SSD1306_ClearScreen (void) - Clear screen
SSD1306_NormalScreen (uint8_t) - Normal screen
SSD1306_InverseScreen (uint8_t) - Inverse screen
SSD1306_SetPosition (uint8_t, uint8_t) - Set position
SSD1306_DrawChar (char) - Draw specific character
SSD1306_DrawString (char*) - Draw specific string
SSD1306_UpdateScreen (uint8_t) - Update content on display
SSD1306_DrawLine (uint8_t, uint8_t, uint8_t, uint8_t) - Draw line