mirror of
https://github.com/Matiasus/SSD1306.git
synced 2024-09-19 09:36:01 -04:00
241 lines
8.7 KiB
C
241 lines
8.7 KiB
C
/**
|
||
* -------------------------------------------------------------------------------------+
|
||
* @brief SSD1306 OLED Driver
|
||
* -------------------------------------------------------------------------------------+
|
||
* Copyright (C) 2020 Marian Hrinko.
|
||
* Written by Marian Hrinko (mato.hrinko@gmail.com)
|
||
*
|
||
* @author Marian Hrinko
|
||
* @date 06.10.2020
|
||
* @file ssd1306.h
|
||
* @version 2.0.0
|
||
* @test AVR Atmega328p
|
||
*
|
||
* @depend string.h, font.h, twi.h
|
||
* -------------------------------------------------------------------------------------+
|
||
* @brief Version 1.0 -> applicable for 1 display
|
||
* Version 2.0 -> rebuild to 'cacheMemLcd' array
|
||
* Version 3.0 -> simplified alphanumeric version for 1 display
|
||
* -------------------------------------------------------------------------------------+
|
||
* @usage Basic Setup for OLED Display
|
||
*/
|
||
|
||
#ifndef __SSD1306_H__
|
||
#define __SSD1306_H__
|
||
|
||
// @includes
|
||
#include <string.h> // memset function
|
||
#include "font.h"
|
||
#include "twi.h"
|
||
|
||
// Success / Error
|
||
// ------------------------------------------------------------------------------------
|
||
#define SSD1306_SUCCESS 0
|
||
#define SSD1306_ERROR 1
|
||
|
||
// Address definition
|
||
// ------------------------------------------------------------------------------------
|
||
#define SSD1306_ADDR 0x3C
|
||
|
||
// Command definition
|
||
// ------------------------------------------------------------------------------------
|
||
#define SSD1306_COMMAND 0x80 // Continuation bit=1, D/C=0; 1000 0000
|
||
#define SSD1306_COMMAND_STREAM 0x00 // Continuation bit=0, D/C=0; 0000 0000
|
||
#define SSD1306_DATA 0xC0 // Continuation bit=1, D/C=1; 1100 0000
|
||
#define SSD1306_DATA_STREAM 0x40 // Continuation bit=0, D/C=1; 0100 0000
|
||
|
||
#define SSD1306_SET_MUX_RATIO 0xA8 // Set MUX ratio to N+1 MUX, N=A[5:0] : from 16MUX to 64MUX
|
||
#define SSD1306_DISPLAY_OFFSET 0xD3 // Set Display Offset
|
||
#define SSD1306_DISPLAY_ON 0xAF // Display ON in normal mode
|
||
#define SSD1306_DISPLAY_OFF 0xAE // Display OFF (sleep mode)
|
||
#define SSD1306_DIS_ENT_DISP_ON 0xA4 // Entire Display ON, Output ignores RAM content
|
||
#define SSD1306_DIS_IGNORE_RAM 0xA5 // Resume to RAM content display, Output follows RAM content
|
||
#define SSD1306_DIS_NORMAL 0xA6 // Normal display, 0 in RAM: OFF in display panel, 1 in RAM: ON in display panel
|
||
#define SSD1306_DIS_INVERSE 0xA7 // Inverse display, 0 in RAM: ON in display panel, 1 in RAM: OFF in display panel
|
||
#define SSD1306_DEACT_SCROLL 0x2E // Stop scrolling that is configured by command 26h/27h/29h/2Ah
|
||
#define SSD1306_ACTIVE_SCROLL 0x2F // Start scrolling that is configured by the scrolling setup commands:26h/27h/29h/2Ah
|
||
#define SSD1306_SET_START_LINE 0x40 // Set Display Start Line
|
||
#define SSD1306_MEMORY_ADDR_MODE 0x20 // Set Memory, Addressing Mode
|
||
#define SSD1306_SET_COLUMN_ADDR 0x21 // Set Column Address
|
||
#define SSD1306_SET_PAGE_ADDR 0x22 // Set Page Address
|
||
#define SSD1306_SEG_REMAP 0xA0 // Set Segment Re-map, X[0]=0b column address 0 is mapped to SEG0
|
||
#define SSD1306_SEG_REMAP_OP 0xA1 // Set Segment Re-map, X[0]=1b: column address 127 is mapped to SEG0
|
||
#define SSD1306_COM_SCAN_DIR 0xC0 // Set COM Output, X[3]=0b: normal mode (RESET) Scan from COM0 to COM[N –1], e N is the Multiplex ratio
|
||
#define SSD1306_COM_SCAN_DIR_OP 0xC8 // Set COM Output, X[3]=1b: remapped mode. Scan from COM[N-1] to COM0, e N is the Multiplex ratio
|
||
#define SSD1306_COM_PIN_CONF 0xDA // Set COM Pins Hardware Configuration,
|
||
// A[4]=0b, Sequential COM pin configuration, A[4]=1b(RESET), Alternative COM pin configuration
|
||
// A[5]=0b(RESET), Disable COM Left/Right remap, A[5]=1b, Enable COM Left/Right remap
|
||
#define SSD1306_SET_CONTRAST 0x81 // Set Contrast Control, Double byte command to select 1 to 256 contrast steps, increases as the value increases
|
||
#define SSD1306_SET_OSC_FREQ 0xD5 // Set Display Clock Divide Ratio/Oscillator Frequency
|
||
// A[3:0] : Define the divide ratio (D) of the display clocks (DCLK): Divide ratio= A[3:0] + 1, RESET is 0000b (divide ratio = 1)
|
||
// A[7:4] : Set the Oscillator Frequency, FOSC. Oscillator Frequency increases with the value of A[7:4] and vice versa. RESET is 1000b
|
||
#define SSD1306_SET_CHAR_REG 0x8D // Charge Pump Setting, A[2] = 0b, Disable charge pump(RESET), A[2] = 1b, Enable charge pump during display on
|
||
// The Charge Pump must be enabled by the following command:
|
||
// 8Dh ; Charge Pump Setting
|
||
// 14h ; Enable Charge Pump
|
||
// AFh; Display ON
|
||
#define SSD1306_SET_PRECHARGE 0xD9 // Set Pre-charge Period
|
||
#define SSD1306_VCOM_DESELECT 0xDB // Set VCOMH Deselect Leve
|
||
#define SSD1306_NOP 0xE3 // No operation
|
||
#define SSD1306_RESET 0xE4 // Maybe SW RESET, @source https://github.com/SmingHub/Sming/issues/501
|
||
|
||
// Clear Color
|
||
// ------------------------------------------------------------------------------------
|
||
#define CLEAR_COLOR 0x00
|
||
|
||
// Init Status
|
||
// ------------------------------------------------------------------------------------
|
||
#define INIT_STATUS 0xFF
|
||
|
||
// AREA definition
|
||
// ------------------------------------------------------------------------------------
|
||
#define START_PAGE_ADDR 0
|
||
#define END_PAGE_ADDR 3 // 7 for 128x64, 3 for 128x32 version
|
||
#define START_COLUMN_ADDR 0
|
||
#define END_COLUMN_ADDR 127
|
||
#define RAM_X_END END_COLUMN_ADDR + 1
|
||
#define RAM_Y_END END_PAGE_ADDR + 1
|
||
|
||
#define CACHE_SIZE_MEM (1 + END_PAGE_ADDR) * (1 + END_COLUMN_ADDR)
|
||
|
||
#define MAX_X END_COLUMN_ADDR
|
||
#define MAX_Y (END_PAGE_ADDR + 1) * 8
|
||
|
||
// @var set area
|
||
unsigned int _counter;
|
||
|
||
/**
|
||
* --------------------------------------------------------------------------------------------+
|
||
* PRIVATE FUNCTIONS
|
||
* --------------------------------------------------------------------------------------------+
|
||
*/
|
||
|
||
/**
|
||
* @brief SSD1306 Init
|
||
*
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_Init (uint8_t);
|
||
|
||
/**
|
||
* @brief SSD1306 Send Start and SLAW request
|
||
*
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_Send_StartAndSLAW (uint8_t);
|
||
|
||
/**
|
||
* @brief SSD1306 Send command
|
||
*
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_Send_Command (uint8_t);
|
||
|
||
/**
|
||
* +------------------------------------------------------------------------------------+
|
||
* |== PUBLIC FUNCTIONS ================================================================|
|
||
* +------------------------------------------------------------------------------------+
|
||
*/
|
||
|
||
/**
|
||
* @brief SSD1306 Clear screen
|
||
*
|
||
* @param void
|
||
*
|
||
* @return void
|
||
*/
|
||
void SSD1306_ClearScreen (void);
|
||
|
||
/**
|
||
* @brief SSD1306 Normal colors
|
||
*
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_NormalScreen (uint8_t);
|
||
|
||
/**
|
||
* @brief SSD1306 Inverse colors
|
||
*
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_InverseScreen (uint8_t);
|
||
|
||
/**
|
||
* @brief SSD1306 Update screen
|
||
*
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_UpdateScreen (uint8_t);
|
||
|
||
/**
|
||
* @brief SSD1306 Update text position
|
||
*
|
||
* @param void
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_UpdatePosition (void);
|
||
|
||
/**
|
||
* @brief SSD1306 Set position
|
||
*
|
||
* @param uint8_t
|
||
* @param uint8_t
|
||
*
|
||
* @return void
|
||
*/
|
||
void SSD1306_SetPosition (uint8_t, uint8_t);
|
||
|
||
/**
|
||
* @brief SSD1306 Draw character
|
||
*
|
||
* @param char
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_DrawChar (char);
|
||
|
||
/**
|
||
* @brief SSD1306 Draw string
|
||
*
|
||
* @param char *
|
||
*
|
||
* @return void
|
||
*/
|
||
void SSD1306_DrawString (char *);
|
||
|
||
/**
|
||
* @brief Draw pixel
|
||
*
|
||
* @param uint8_t
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_DrawPixel (uint8_t, uint8_t);
|
||
|
||
/**
|
||
* @brief Draw line
|
||
*
|
||
* @param uint8_t
|
||
* @param uint8_t
|
||
* @param uint8_t
|
||
* @param uint8_t
|
||
*
|
||
* @return uint8_t
|
||
*/
|
||
uint8_t SSD1306_DrawLine (uint8_t, uint8_t, uint8_t, uint8_t);
|
||
|
||
#endif |