# C Library for SSD1306 0.96" OLED display

## SSD1306 Description
Detailed information are described in [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf).

## Library
C library is aimed for driving [0.96" OLED display with SSD1306 driver](#demonstration) 128x64 or 128x32 version through TWI's (I2C). Settings for particular versions:
  - 128x64 version
    - command argument **SSD1306_SET_MUX_RATIO** set to *0x3F* (ssd1306.c)
    - command argument **SSD1306_COM_PIN_CONF** set to *0x12*  (ssd1306.c)
    - **END_PAGE_ADDR** set to 7 (ssd1306.h)
  - 128x32 version
    - command argument **SSD1306_SET_MUX_RATIO** set to *0x1F* (ssd1306.c)
    - command argument **SSD1306_COM_PIN_CONF** set to *0x02* (ssd1306.c)
    - **END_PAGE_ADDR** set to 3 (ssd1306.h)

### Versions
- 1.0 - basic functions. The first publication.
- [2.0](https://github.com/Matiasus/SSD1306/tree/v2.0.0) - more changes: 
  - rebuild to 'cacheMemLcd' array approach. It means that every request is stored in 'cacheMemLcd' array (RAM) and by the [SSD1306_UpdateScreen (uint8_t)](#ssd1306_updatescreen) function is printed on the display.
  - added new function -> [SSD1306_DrawLine (uint8_t, uint8_t, uint8_t, uint8_t)](#ssd1306_drawline). Possible depicted any line (horizontal, vertical, with slope).
  - possible to use for more than 1 display (not tested). 
  - **!!!** ~1kB RAM memory consumption.
- [3.0](https://github.com/Matiasus/SSD1306/tree/v3.0.1) - simplified alphanumeric version
  - displaying alphanumeric characters
  - for **one display** applicable
  - **only few RAM bytes** consumption
  - **!!!** no graphic functions like drawLine
- [3.1](https://github.com/Matiasus/SSD1306/tree/v3.1.0) - simplified version with draw lines
  - displaying alphanumeric characters with graphic functions like drawLine vertical & horizontal
  - for **one display** applicable
  - **only few RAM bytes** consumption
  - horizontal scroll function added

## Dependencies
- [font.h](https://github.com/Matiasus/SSD1306/blob/master/lib/font.h)
- [twi.c](https://github.com/Matiasus/SSD1306/blob/master/lib/twi.c)
- [twi.h](https://github.com/Matiasus/SSD1306/blob/master/lib/twi.h)

Font.c can be modified according to application requirements with form defined in font.c. Maximal permissible horizontal dimension is 8 bits.

### Usage
Prior defined for MCU Atmega328p / Atmega8 / Atmega16. Need to be carefull with TWI ports definition.

| PORT  | [Atmega16](http://ww1.microchip.com/downloads/en/devicedoc/doc2466.pdf) | [Atmega8](https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2486-8-bit-AVR-microcontroller-ATmega8_L_datasheet.pdf) / [Atmega328](https://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf) |
| :---: | :---: | :---: |
| SCL | PC0 | PC5 |
| SDA | PC1 | PC4 |

### Picture of hardware connection
<img src="img/connection.png" alt="Hardware connection" width="600">

### Tested
Library was tested and proved with **_0.96″ 128x64 and 0.91" 128x32 OLED Display (SSD1306 driver)_** and **Arduino UNO R3**. The Arduino was without a bootloader installed, it was only raw Atmega328P microcontroller. Communication was done through I2C (TWI) interface of Arduino UNO R3. This hardware configuration was chosen for simplicity.

## Init OLED Sequence
Init sequence OLED display was defined mainly according to page 64 (next to last page) of [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf).

### Flowchart
```
// +---------------------------+
// |      Software Reset       |  // not tested yet, @source https://github.com/SmingHub/Sming/issues/501
// +---------------------------+
// |           0xE4            |
// +---------------------------+
//              ||
// +---------------------------+
// |        DISPLAY OFF        |
// +---------------------------+
// |           0xAE            |
// +---------------------------+
//              ||
// +---------------------------+
// |       Set MUX Ratio       |
// +---------------------------+
// |           0xA8            |
// |           0x3F            |
// +---------------------------+
//              ||
// +---------------------------+
// |   Set Memory Addr  Mode   |
// +---------------------------+
// |           0x20            |
// |           0x00            |
// +---------------------------+
//              ||
// +---------------------------+
// |      Set Start Line       |
// +---------------------------+
// |           0x40            |
// +---------------------------+
//              ||
// +---------------------------+
// |    Set Display Offset     |
// +---------------------------+
// |           0xD3            |
// |           0x00            |
// +---------------------------+
//              ||
// +---------------------------+
// |     Set Segment Remap     |
// +---------------------------+
// |       0xA0 or 0xA1        |
// +---------------------------+
//              ||
// +---------------------------+
// |   Set COM Output Scan     |
// |        Direction          |
// +---------------------------+
// |       0xC0 or 0xC8        |
// +---------------------------+
//              ||
// +---------------------------+
// |   Set COM Pins hardware   |
// |       configuration       |
// +---------------------------+
// |           0xDA            |
// |      0x12 for 128x64      |
// |      0x02 for 128x32      |
// +---------------------------+
//              ||
// +---------------------------+
// |   Set Contrast Control    |
// +---------------------------+
// |           0x81            |
// |           0x7F            |
// +---------------------------+
//              ||
// +---------------------------+
// | Disable Entire Display On |
// +---------------------------+
// |           0xA4            |
// +---------------------------+
//              ||
// +---------------------------+
// |    Set Normal Display     |
// +---------------------------+
// |           0xA6            |
// +---------------------------+
//              ||
// +---------------------------+
// |  Set OSC Frequency Fosc   |
// +---------------------------+
// |           0xD5            |
// |           0x80            |
// +---------------------------+
//              ||
// +---------------------------+
// |     Enable charge pump    |
// |         regulator         |
// +---------------------------+
// |           0x8D            |
// |           0x14            |
// +---------------------------+
//              ||
// +---------------------------+
// |     Deactivate Scroll     |
// +---------------------------+
// |           0x2E            |
// +---------------------------+
//              ||
// +---------------------------+
// |        Display On         |
// +---------------------------+
// |           0xAF            |
// +---------------------------+
```
## Functions
- [SSD1306_Init (uint8_t)](#ssd1306_init) - Init display
- [SSD1306_ClearScreen (void)](#ssd1306_clearscreen) - Clear screen
- [SSD1306_NormalScreen (uint8_t)](#ssd1306_normalscreen) - Normal screen
- [SSD1306_InverseScreen (uint8_t)](#ssd1306_inversescreen) - Inverse screen
- [SSD1306_SetPosition (uint8_t, uint8_t)](#ssd1306_setposition) - Set position
- [SSD1306_DrawChar (char)](#ssd1306_drawchar) - Draw specific character
- [SSD1306_DrawString (char*)](#ssd1306_drawstring) - Draw specific string
- [SSD1306_UpdateScreen (uint8_t)](#ssd1306_updatescreen) - Update content on display
- [SSD1306_DrawLine (uint8_t, uint8_t, uint8_t, uint8_t)](#ssd1306_drawline) - Draw line

## Demonstration version v1.0.0
<img src="img/ssd1306_v100.jpg" />

## Demonstration version v2.0.0
<img src="img/ssd1306_v200.png" />

## Demonstration version v3.0.0
<img src="img/ssd1306_v300.jpg" />

## Acknowledgement
- [Adafruit SSD1306 Library](https://github.com/adafruit/Adafruit_SSD1306)

## Links
- [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf)
- [Atmega328](https://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf)