mirror of
https://github.com/Matiasus/SSD1306.git
synced 2024-10-03 18:18:46 -04:00
V3 drawline horizontal successfull
This commit is contained in:
Marián
GitHub
parent
09d3f61e56
commit
7e155513a8
163
lib/ssd1306.c
163
lib/ssd1306.c
@ -21,8 +21,8 @@
|
||||
* @usage Basic Setup for OLED Display
|
||||
*/
|
||||
|
||||
// @includes
|
||||
#include "ssd1306.h"
|
||||
#include <util/delay.h>
|
||||
|
||||
// +---------------------------+
|
||||
// | Set MUX Ratio |
|
||||
@ -103,21 +103,21 @@
|
||||
const uint8_t INIT_SSD1306[] PROGMEM = {
|
||||
18, // number of initializers
|
||||
0, SSD1306_DISPLAY_OFF, // 0xAE = Set Display OFF
|
||||
1, SSD1306_SET_MUX_RATIO, 0x3F, // 0xA8 - 0x3F = 64MUX - for 128x64 version
|
||||
// 0x1F = 32MUX - for 128x32 version
|
||||
1, SSD1306_SET_MUX_RATIO, 31, // 0xA8 - 64MUX for 128 x 64 version
|
||||
// - 32MUX for 128 x 32 version
|
||||
1, SSD1306_MEMORY_ADDR_MODE, 0x00, // 0x20 = Set Memory Addressing Mode
|
||||
// 0x00 - Horizontal Addressing Mode
|
||||
// 0x01 - Vertical Addressing Mode
|
||||
// 0x02 - Page Addressing Mode (RESET)
|
||||
2, SSD1306_SET_COLUMN_ADDR, START_COL_ADDR, END_COL_ADDR, // 0x21 = Set Column Address, 0 to 127
|
||||
2, SSD1306_SET_PAGE_ADDR, START_PAGE_ADDR, END_PAGE_ADDR, // 0x22 = Set Page Address, 0 to 7 for 128x64 version or 0 to 3 for 128x32 version
|
||||
2, SSD1306_SET_COLUMN_ADDR, START_COLUMN_ADDR, END_COLUMN_ADDR, // 0x21 = Set Column Address, 0 - 127
|
||||
2, SSD1306_SET_PAGE_ADDR, START_PAGE_ADDR, END_PAGE_ADDR, // 0x22 = Set Page Address, 0 - 7
|
||||
0, SSD1306_SET_START_LINE, // 0x40
|
||||
1, SSD1306_DISPLAY_OFFSET, 0x00, // 0xD3
|
||||
0, SSD1306_SEG_REMAP_OP, // 0xA0 / remap 0xA1
|
||||
0, SSD1306_COM_SCAN_DIR_OP, // 0xC0 = normal / scan direction COM output
|
||||
// 0xC8 = remap / scan direction COM output from up to bottom or vice versa
|
||||
1, SSD1306_COM_PIN_CONF, 0x12, // 0xDA, 0x12 - for 128x64 version, Disable COM Left/Right remap, Alternative COM pin conf
|
||||
// 0x02 - for 128x32 version, Disable COM Left/Right remap, Sequential COM pin conf
|
||||
0, SSD1306_COM_SCAN_DIR_OP, // 0xC0 / remap 0xC8
|
||||
1, SSD1306_COM_PIN_CONF, 0x02, // 0xDA, 0x12 - Disable COM Left/Right remap, Alternative COM pin configuration
|
||||
// 0x12 - for 128 x 64 version
|
||||
// 0x02 - for 128 x 32 version
|
||||
1, SSD1306_SET_CONTRAST, 0x7F, // 0x81, 0x7F - reset value (max 0xFF)
|
||||
0, SSD1306_DIS_ENT_DISP_ON, // 0xA4
|
||||
0, SSD1306_DIS_NORMAL, // 0xA6
|
||||
@ -129,8 +129,8 @@ const uint8_t INIT_SSD1306[] PROGMEM = {
|
||||
0, SSD1306_DISPLAY_ON // 0xAF = Set Display ON
|
||||
};
|
||||
|
||||
uint8_t _indexCol = START_COL_ADDR; // @var global - cache index column
|
||||
uint8_t _indexPage = START_PAGE_ADDR; // @var global - cache index page
|
||||
unsigned short int _indexCol = START_COLUMN_ADDR; // @var global - cache index column
|
||||
unsigned short int _indexPage = START_PAGE_ADDR; // @var global - cache index page
|
||||
|
||||
/**
|
||||
* @desc SSD1306 Init
|
||||
@ -141,8 +141,8 @@ uint8_t _indexPage = START_PAGE_ADDR; // @var global
|
||||
*/
|
||||
uint8_t SSD1306_Init (void)
|
||||
{
|
||||
const uint8_t * commands = INIT_SSD1306; // variables
|
||||
uint8_t no_of_commands = pgm_read_byte (commands++); // number of commands
|
||||
const uint8_t *commands = INIT_SSD1306; // variables
|
||||
uint8_t no_of_commands = pgm_read_byte(commands++); // number of commands
|
||||
uint8_t no_of_arguments; // number od arguments
|
||||
uint8_t command; // command
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
@ -176,6 +176,7 @@ uint8_t SSD1306_Init (void)
|
||||
return status; // error
|
||||
}
|
||||
}
|
||||
|
||||
no_of_commands--; // next command
|
||||
}
|
||||
// TWI STOP
|
||||
@ -188,7 +189,7 @@ uint8_t SSD1306_Init (void)
|
||||
/**
|
||||
* @desc SSD1306 Send Start and SLAW request
|
||||
*
|
||||
* @param uint8_t address
|
||||
* @param uint8_t
|
||||
*
|
||||
* @return uint8_t
|
||||
*/
|
||||
@ -267,7 +268,7 @@ uint8_t SSD1306_NormalScreen (void)
|
||||
}
|
||||
|
||||
/**
|
||||
* @desc SSD1306 Inverse screen colors
|
||||
* @desc SSD1306 Inverse colors
|
||||
*
|
||||
* @param void
|
||||
*
|
||||
@ -336,8 +337,8 @@ uint8_t SSD1306_ClearScreen (void)
|
||||
/**
|
||||
* @desc SSD1306 Set position
|
||||
*
|
||||
* @param uint8_t x / column -> 0 ... 127
|
||||
* @param uint8_t y / page -> 0 ... 7
|
||||
* @param uint8_t column -> 0 ... 127
|
||||
* @param uint8_t page -> 0 ... 7
|
||||
*
|
||||
* @return void
|
||||
*/
|
||||
@ -345,29 +346,6 @@ uint8_t SSD1306_SetPosition (uint8_t x, uint8_t y)
|
||||
{
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
|
||||
// Set Window
|
||||
// -------------------------------------------------------------------------------------
|
||||
status = SSD1306_SetWindow (x, END_COL_ADDR, y, END_PAGE_ADDR);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
return SSD1306_SUCCESS; // success
|
||||
}
|
||||
|
||||
/**
|
||||
* @desc SSD1306 Set window
|
||||
*
|
||||
* @param uint8_t x1 / column -> 0 - MAX_X / 127 /
|
||||
* @param uint8_t x2 / column -> 0 - MAX_X / 127 /
|
||||
* @param uint8_t y1 / page -> 0 - MAX_Y / 7 for 128x64, 3 for 128x32 ver /
|
||||
* @param uint8_t y2 / page -> 0 - MAX_Y / 7 for 128x64, 3 for 128x32 ver /
|
||||
*
|
||||
* @return void
|
||||
*/
|
||||
uint8_t SSD1306_SetWindow (uint8_t x1, uint8_t x2, uint8_t y1, uint8_t y2)
|
||||
{
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
|
||||
// TWI start & SLAW
|
||||
// -------------------------------------------------------------------------------------
|
||||
status = SSD1306_Send_StartAndSLAW (SSD1306_ADDR); // start & SLAW
|
||||
@ -381,12 +359,12 @@ uint8_t SSD1306_SetWindow (uint8_t x1, uint8_t x2, uint8_t y1, uint8_t y2)
|
||||
return status; // error
|
||||
}
|
||||
// start COLUMN
|
||||
status = SSD1306_Send_Command (x1);
|
||||
status = SSD1306_Send_Command (x);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
// end COLUMN
|
||||
status = SSD1306_Send_Command (x2);
|
||||
status = SSD1306_Send_Command (END_COLUMN_ADDR); // 127
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
@ -400,12 +378,12 @@ uint8_t SSD1306_SetWindow (uint8_t x1, uint8_t x2, uint8_t y1, uint8_t y2)
|
||||
return status; // error
|
||||
}
|
||||
// start PAGE
|
||||
status = SSD1306_Send_Command (y1);
|
||||
status = SSD1306_Send_Command (y);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
// end PAGE
|
||||
status = SSD1306_Send_Command (y2);
|
||||
status = SSD1306_Send_Command (END_PAGE_ADDR); // 7 for 128x64
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
@ -434,7 +412,7 @@ uint8_t SSD1306_UpdatePosition (void)
|
||||
|
||||
// check position
|
||||
// -------------------------------------------------------------------------------------
|
||||
if (x > END_COL_ADDR) {
|
||||
if (x > END_COLUMN_ADDR) {
|
||||
// last page not reached
|
||||
// -----------------------------------------------------------------------------------
|
||||
if (_indexPage < END_PAGE_ADDR) {
|
||||
@ -500,6 +478,7 @@ uint8_t SSD1306_DrawChar (char ch)
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
|
||||
_indexCol = _indexCol + CHARS_COLS_LENGTH + 1; // update global col
|
||||
|
||||
// TWI stop
|
||||
@ -539,11 +518,11 @@ uint8_t SSD1306_DrawString (char *str)
|
||||
*/
|
||||
uint8_t SSD1306_DrawPixel (uint8_t x, uint8_t y)
|
||||
{
|
||||
uint8_t page = y >> 3; // page
|
||||
uint8_t pixel = 1 << (y - (page << 3)); // pixel
|
||||
uint8_t page = y >> 3; // find page (y / 8)
|
||||
uint8_t pixel = 1 << (y - (page << 3)); // which pixel (y % 8)
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
|
||||
if ((x > MAX_X) && (y > MAX_Y)) { // if out of range
|
||||
if ((x > MAX_X) || (y > MAX_Y)) { // if out of range
|
||||
return SSD1306_ERROR; // error
|
||||
}
|
||||
|
||||
@ -569,7 +548,6 @@ uint8_t SSD1306_DrawPixel (uint8_t x, uint8_t y)
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
_indexCol = x; // update column index
|
||||
|
||||
// PAGE
|
||||
// -------------------------------------------------------------------------------------
|
||||
@ -587,7 +565,6 @@ uint8_t SSD1306_DrawPixel (uint8_t x, uint8_t y)
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
_indexPage = y; // update page index
|
||||
|
||||
// TWI control byte data stream
|
||||
// -------------------------------------------------------------------------------------
|
||||
@ -612,22 +589,29 @@ uint8_t SSD1306_DrawPixel (uint8_t x, uint8_t y)
|
||||
/**
|
||||
* @desc Draw line horizontal
|
||||
*
|
||||
* @param uint8_t x
|
||||
* @param uint8_t y1
|
||||
* @param uint8_t y2
|
||||
* @param uint8_t
|
||||
* @param uint8_t
|
||||
* @param uint8_t
|
||||
*
|
||||
* @return uint8_t
|
||||
*/
|
||||
uint8_t SSD1306_DrawLineHorz (uint8_t y, uint8_t x1, uint8_t x2)
|
||||
{
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
uint8_t i = 0; // counter
|
||||
uint8_t len = x2 - x1; // length
|
||||
uint8_t j = 0; // counter
|
||||
uint8_t page = y >> 3; // page
|
||||
uint8_t pixel = 1 << (y - (page << 3)); // pixel
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
|
||||
if ((x > MAX_X) && (y > MAX_Y)) { // if out of range
|
||||
return SSD1306_ERROR; // error
|
||||
uint8_t ram[RAM_Y_END][RAM_X_END];
|
||||
|
||||
while (i < RAM_Y_END) {
|
||||
if (i == page) {
|
||||
memset (ram[i], pixel, RAM_X_END);
|
||||
} else {
|
||||
memset (ram[i], 0x00, RAM_X_END);
|
||||
}
|
||||
i++;
|
||||
}
|
||||
|
||||
// TWI start & SLAW
|
||||
@ -643,16 +627,15 @@ uint8_t SSD1306_DrawLineHorz (uint8_t y, uint8_t x1, uint8_t x2)
|
||||
return status; // error
|
||||
}
|
||||
// start COLUMN
|
||||
status = SSD1306_Send_Command (x1);
|
||||
status = SSD1306_Send_Command (0);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
// end COLUMN
|
||||
status = SSD1306_Send_Command (x2);
|
||||
status = SSD1306_Send_Command (127);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
_indexCol = x; // update column index
|
||||
|
||||
// PAGE
|
||||
// -------------------------------------------------------------------------------------
|
||||
@ -661,16 +644,15 @@ uint8_t SSD1306_DrawLineHorz (uint8_t y, uint8_t x1, uint8_t x2)
|
||||
return status; // error
|
||||
}
|
||||
// start PAGE
|
||||
status = SSD1306_Send_Command (page);
|
||||
status = SSD1306_Send_Command (0);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
// end PAGE
|
||||
status = SSD1306_Send_Command (page);
|
||||
status = SSD1306_Send_Command (3);
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
_indexPage = y; // update page index
|
||||
|
||||
// TWI control byte data stream
|
||||
// -------------------------------------------------------------------------------------
|
||||
@ -679,13 +661,19 @@ uint8_t SSD1306_DrawLineHorz (uint8_t y, uint8_t x1, uint8_t x2)
|
||||
return status; // error
|
||||
}
|
||||
|
||||
i = 0;
|
||||
j = 0;
|
||||
// send pixels
|
||||
// -------------------------------------------------------------------------------------
|
||||
while (i < len) {
|
||||
status = TWI_MT_Send_Data (pixel); // send pixel
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
while (i < RAM_Y_END) {
|
||||
while (j < RAM_X_END) {
|
||||
status = TWI_MT_Send_Data (ram[i][j]); // send data col
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
j++;
|
||||
}
|
||||
j = 0;
|
||||
i++;
|
||||
}
|
||||
|
||||
@ -693,12 +681,27 @@ uint8_t SSD1306_DrawLineHorz (uint8_t y, uint8_t x1, uint8_t x2)
|
||||
// -------------------------------------------------------------------------------------
|
||||
TWI_Stop ();
|
||||
|
||||
|
||||
return SSD1306_SUCCESS; // success return
|
||||
}
|
||||
|
||||
/**
|
||||
* @desc Draw line vertical
|
||||
*
|
||||
* @param uint8_t
|
||||
* @param uint8_t
|
||||
* @param uint8_t
|
||||
*
|
||||
* @return uint8_t
|
||||
*/
|
||||
uint8_t SSD1306_DrawLineVert (uint8_t x, uint8_t y1, uint8_t y2)
|
||||
{
|
||||
|
||||
return SSD1306_SUCCESS; // success
|
||||
}
|
||||
|
||||
/**
|
||||
* @desc Draw line by Bresenham algoritm
|
||||
* @note Approach with DrawPixel function takes 9 bytes for drawing 1 pixel
|
||||
*
|
||||
* @param uint8_t x start position / 0 <= cols <= MAX_X-1
|
||||
* @param uint8_t x end position / 0 <= cols <= MAX_X-1
|
||||
@ -709,32 +712,34 @@ uint8_t SSD1306_DrawLineHorz (uint8_t y, uint8_t x1, uint8_t x2)
|
||||
*/
|
||||
uint8_t SSD1306_DrawLine (uint8_t x1, uint8_t x2, uint8_t y1, uint8_t y2)
|
||||
{
|
||||
uint8_t status = INIT_STATUS; // TWI init status 0xFF
|
||||
|
||||
int16_t D; // determinant
|
||||
int16_t delta_x, delta_y; // deltas
|
||||
int16_t trace_x = 1, trace_y = 1; // steps
|
||||
uint16_t buffer[]; // buffer
|
||||
|
||||
if ((x1 > MAX_X) || (y1 > MAX_Y) ||
|
||||
(x2 > MAX_X) || (y2 > MAX_Y) ) { // out of range?
|
||||
return SSD1306_ERROR; // error
|
||||
}
|
||||
|
||||
if ((x1 > x2) || (y1 > y2) ) { // start point first?
|
||||
return SSD1306_ERROR; // error
|
||||
}
|
||||
|
||||
delta_x = x2 - x1; // delta x
|
||||
delta_y = y2 - y1; // delta y
|
||||
|
||||
// draw line with faster draw horizontal line function
|
||||
// Horizontal line
|
||||
// -------------------------------------------------------------------------------------
|
||||
if (delta_y == 0) {
|
||||
status = SSD1306_DrawLineHorz (y1, x1, x2); // draw horiyontal line
|
||||
status = SSD1306_DrawLineHorz (y1, x1, x2); // draw horizontal line
|
||||
if (SSD1306_SUCCESS != status) { // check status
|
||||
return status; // error
|
||||
}
|
||||
return SSD1306_SUCCESS; // success return
|
||||
}
|
||||
|
||||
if (delta_x < 0) { // check if x2 > x1
|
||||
delta_x = -delta_x; // negate delta x
|
||||
trace_x = -trace_x; // negate step x
|
||||
}
|
||||
if (delta_y < 0) { // check if y2 > y1
|
||||
delta_y = -delta_y; // negate delta y
|
||||
trace_y = -trace_y; // negate step y
|
||||
}
|
||||
// condition for m < 1 (dy < dx)
|
||||
// -------------------------------------------------------------------------------------
|
||||
if (delta_y < delta_x) { //
|
||||
|
||||
Loading…
Reference in New Issue
Block a user