alex/SSD1306
1
0
Fork 0
mirror of https://github.com/Matiasus/SSD1306.git synced 2024-10-03 18:18:46 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update flowchart & add hw scheme

Browse Source
This commit is contained in:
Marián 2023-12-20 11:25:03 +01:00 committed by GitHub
parent 5220f1649b
commit 7881fde0b3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 69 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

103
README.md
View File

@ -42,86 +42,122 @@ Prior defined for MCU Atmega328p / Atmega8 / Atmega16. Need to be carefull with
| SCL | PC0 | PC5 |
| SDA | PC1 | PC4 |
### Picture of hardware connection
<img src="img/connection.png" alt="Hardware connection" width="600">
### Tested
Library was tested and proved with **_0.96″ 128x64 and 128x32 OLED Display (SSD1306 driver)_** and **_Atmega328p_**.
Library was tested and proved with **_0.96″ 128x64 and 0.91" 128x32 OLED Display (SSD1306 driver)_** and **Arduino UNO R3**. The Arduino was without a bootloader installed, it was only raw Atmega328P microcontroller. Communication was done through I2C (TWI) interface of Arduino UNO R3. This hardware configuration was chosen for simplicity.
## Init OLED Sequence
Init sequence OLED display was defined according to page 64 (next to last page) of [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf).
Init sequence OLED display was defined mainly according to page 64 (next to last page) of [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf).
### Flowchart
```
// +---------------------------+
// | Set MUX Ratio |
// | Software Reset | // not tested yet, @source https://github.com/SmingHub/Sming/issues/501
// +---------------------------+
// | 0xA8, 0x3F |
// | 0xE4 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | DISPLAY OFF |
// +---------------------------+
// | 0xAE |
// +---------------------------+
// ||
// +---------------------------+
// | Set MUX Ratio |
// +---------------------------+
// | 0xA8 |
// | 0x3F |
// +---------------------------+
// ||
// +---------------------------+
// | Set Memory Addr Mode |
// +---------------------------+
// | 0x20 |
// | 0x00 |
// +---------------------------+
// ||
// +---------------------------+
// | Set Start Line |
// +---------------------------+
// | 0x40 |
// +---------------------------+
// ||
// +---------------------------+
// | Set Display Offset |
// +---------------------------+
// | 0xD3, 0x00 |
// | 0xD3 |
// | 0x00 |
// +---------------------------+
// |
// +---------------------------+
// | Set Display Start Line |
// +---------------------------+
// | 0x40 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Set Segment Remap |
// +---------------------------+
// | 0xA0 / 0xA1 |
// | 0xA0 or 0xA1 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Set COM Output Scan |
// | Direction |
// +---------------------------+
// | 0xC0 / 0xC8 |
// | 0xC0 or 0xC8 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Set COM Pins hardware |
// | configuration |
// +---------------------------+
// | 0xDA, 0x02 |
// | 0xDA |
// | 0x02 for 128x64 |
// | 0x02 for 128x32 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Set Contrast Control |
// +---------------------------+
// | 0x81, 0x7F |
// | 0x81 |
// | 0x7F |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Disable Entire Display On |
// +---------------------------+
// | 0xA4 |
// | 0xA4 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Set Normal Display |
// +---------------------------+
// | 0xA6 |
// | 0xA6 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Set Osc Frequency |
// | Set OSC Frequency Fosc |
// +---------------------------+
// | 0xD5, 0x80 |
// | 0xD5 |
// | 0x80 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Enable charge pump |
// | regulator |
// | Enable charge pump |
// | regulator |
// +---------------------------+
// | 0x8D, 0x14 |
// | 0x8D |
// | 0x14 |
// +---------------------------+
// |
// ||
// +---------------------------+
// | Deactivate Scroll |
// +---------------------------+
// | 0x2E |
// +---------------------------+
// ||
// +---------------------------+
// | Display On |
// +---------------------------+
// | 0xAF |
// | 0xAF |
// +---------------------------+
```
## Functions
@ -150,4 +186,3 @@ Init sequence OLED display was defined according to page 64 (next to last page)
## Links
- [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf)
- [Atmega328](https://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf)