diff --git a/README.md b/README.md
index 36158eb..f3090ed 100644
--- a/README.md
+++ b/README.md
@@ -4,14 +4,14 @@
Detailed information are described in [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf).
## Library
-C library is aimed for driving [0.96" OLED display with SSD1306 driver](#demonstration) 128x64 & 128x32 version through TWI's Atmega328p. Settings for different versions:
+C library is aimed for driving [0.96" OLED display with SSD1306 driver](#demonstration) 128x64 or 128x32 version through TWI's (I2C). Settings for particular versions:
- 128x64 version
- - argument command of **SSD1306_SET_MUX_RATIO** set to *63* (ssd1306.c)
- - argument command of **SSD1306_COM_PIN_CONF** set to *0x12* (ssd1306.c)
+ - command argument **SSD1306_SET_MUX_RATIO** set to *63* (ssd1306.c)
+ - command argument **SSD1306_COM_PIN_CONF** set to *0x12* (ssd1306.c)
- **END_PAGE_ADDR** set to 7 (ssd1306.h)
- 128x32 version
- - argument command of **SSD1306_SET_MUX_RATIO** set to *31* (ssd1306.c)
- - argument command of **SSD1306_COM_PIN_CONF** set to *0x02* (ssd1306.c)
+ - command argument **SSD1306_SET_MUX_RATIO** set to *31* (ssd1306.c)
+ - command argument **SSD1306_COM_PIN_CONF** set to *0x02* (ssd1306.c)
- **END_PAGE_ADDR** set to 3 (ssd1306.h)
### Versions
@@ -22,8 +22,9 @@ C library is aimed for driving [0.96" OLED display with SSD1306 driver](#demonst
- Possible to use for more than 1 display (not tested, cause displays that I have avialable had the same addresses).
- **!!!** ~1kB RAM memory consumption.
- 3.0 - simplified alphanumeric version
- - less RAM consumption
- used for displaying alphanumeric characters
+ - **one display** applicable
+ - **only few RAM bytes** consumption
- **!!!** no graphic functions
## Dependencies
@@ -43,7 +44,7 @@ Prior defined for MCU Atmega328p / Atmega8 / Atmega16. Need to be carefull with
| SDA | PC1 | PC4 |
### Tested
-Library was tested and proved on **_0.96″ OLED Display with SSD1306 driver_** and **_Atmega328p_**.
+Library was tested and proved with **_0.96″ 128x64 and 128x32 OLED Display (SSD1306 driver)_** and **_Atmega328p_**.
## Init OLED Sequence
Init sequence OLED display was defined according to page 64 (next to last page) of [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf).
@@ -125,16 +126,20 @@ Init sequence OLED display was defined according to page 64 (next to last page)
// +---------------------------+
```
## Functions
-- [SSD1306_Init (uint8_t)](#ssd1306_init) - Init display
+- [SSD1306_Init (void)](#ssd1306_init) - Init display
- [SSD1306_ClearScreen (void)](#ssd1306_clearscreen) - Clear screen
- [SSD1306_NormalScreen (void)](#ssd1306_normalscreen) - Normal screen
- [SSD1306_InverseScreen (void)](#ssd1306_inversescreen) - Inverse screen
+- [SSD1306_SetWindow (uint8_t, uint8_t, uint8_t, uint8_t)](#ssd1306_setwindow) - Set window
- [SSD1306_SetPosition (uint8_t, uint8_t)](#ssd1306_setposition) - Set position
- [SSD1306_DrawChar (char, enum E_Font)](#ssd1306_drawchar) - Draw specific character (bold | underline | normal)
- [SSD1306_DrawString (char*, enum E_Font)](#ssd1306_drawstring) - Draw specific string (bold | underline | normal)
## Demonstration
-
+
+
+## Acknowledgement
+- [Adafruit SSD1306 Library](https://github.com/adafruit/Adafruit_SSD1306)
## Links
- [Datasheet SSD1306](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf)