GY-63_MS5611/libraries/MATRIX7219
2023-11-10 11:16:43 +01:00
..
.github 0.1.0 MATRIX7219 2023-07-29 16:07:24 +02:00
examples 0.1.1 MATRIX7219 2023-07-30 14:34:46 +02:00
test 0.1.1 MATRIX7219 2023-07-30 14:34:46 +02:00
.arduino-ci.yml 0.1.0 MATRIX7219 2023-07-29 16:07:24 +02:00
CHANGELOG.md update readme.md 2023-11-10 11:16:43 +01:00
keywords.txt update readme.md 2023-11-10 11:16:43 +01:00
library.json update readme.md 2023-11-10 11:16:43 +01:00
library.properties update readme.md 2023-11-10 11:16:43 +01:00
LICENSE 0.1.0 MATRIX7219 2023-07-29 16:07:24 +02:00
MATRIX7219.cpp update readme.md 2023-11-10 11:16:43 +01:00
MATRIX7219.h update readme.md 2023-11-10 11:16:43 +01:00
README.md update readme.md 2023-11-10 11:16:43 +01:00

Arduino CI Arduino-lint JSON check GitHub issues

License: MIT GitHub release PlatformIO Registry

MATRIX7219

Arduino Library for controlling one or more 8x8 LED MATRIX with a MAX7219 / MAX7221.

Description

This experimental library provides an easy control to 8x8 MATRIX boards. It is pretty minimalistic for now as the user still has to do bit math to get the right lights on as one can only set 8 LEDS at a time.

For the future two (derived) classes are planned:

  • a class that is optimized to use for a single 8x8 matrix.
  • a class that buffers the state of the LEDS, allowing more functionality.

MAX7221 derived class is identical (for now).

Tests

It is tested with an UNO and a single 8x8 matrix and a 4x 8x8 matrix-chain. During tests it became clear that the orientation of the matrices I used, seen from the IN connector was different. These insights lead to the implementation of the inverse, reverse and swap functions.

Tested

Tested on Arduino UNO.

Interface

#include "MATRIX7219.h"

Not all functionality works, matrix parameter et al.

  • MATRIX7219(uint8_t dataPin, uint8_t selectPin, uint8_t clockPin, uint8_t matrices) Constructor, initializes IO pins and the number of 8x8 matrices on same pins.
  • MATRIX7221(uint8_t dataPin, uint8_t selectPin, uint8_t clockPin, uint8_t matrices) Constructor (derived class) idem as above.
  • void begin() resets the internals of the connected device.
  • uint8_t getMatrixCount() returns number of matrices set in constructor. Convenience function.
  • void setBrightness(uint8_t bright = 2) set bright = 0..15 for all matrices. Default is a relative low intensity.
  • void displayOff() switches on low power mode == all LEDs off. Leaves all registers the same. Can be used to blink the display, get attention.
  • void displayOn() switches display on again.
  • void displayTest(bool on = false) sets all LEDs on full brightness. Used to verify all LEDS still work. Or to implement a flashy alarm. Default value is false ==> normal mode.
  • void clear() clear all matrices.
  • void setRow(uint8_t row, uint8_t value, uint8_t matrix) set a value to a certain row of a certain matrix.

Invert, reverse and swap.

For adapting the layout if needed.

  • void setInvert(bool invert) invert the output. Default = false.
  • bool getInvert() get current setting.
  • void setReverse(bool rev) reverse the output. Default = false.
  • bool getReverse() get current setting.
  • void setSwap(bool swap) swaps row n with (8-n).
  • bool getSwap() get current setting.

Performance

0.1.0 UNO

MATRIX7219_performance.ino with UNO 16 MHz

board function time (us) notes
UNO begin 796
UNO clear 1572
UNO count 4
UNO setRow(255) 204 setReverse has minimal influence
UNO setRow(0) 200
UNO setBrightness 208

0.1.1 UNO

Optimized registers for UNO (for AVR from FastShiftOut). 2.5 to 4.2 times faster. (price: a few bytes storage).

board function time (us) notes
UNO begin 196 2.5x
UNO clear 368 4.2x
UNO count 4 idem
UNO setRow(255) 56 3.5x
UNO setRow(0) 56 3.5x
UNO setBrightness 56 3.5x

0.1.1 ESP32

First test ESP32

board function time (us) notes
ESP32 begin 37
ESP32 clear 47
ESP32 count 2
ESP32 setRow(255) 12
ESP32 setRow(0) 8
ESP32 setBrightness 8

Future

Must

  • improve documentation

Should

  • create a derived class with a buffer => 8 bytes per Matrix.
    • goal is to have setPixel(x,y) and clearPixel(x,y)
    • design first (performance)

Could

  • examples
    • 8x8 as debugger (dump variables)
  • add unit tests
    • need simulator / mock-up
  • defaults for invert, reverse, swap? (false).

Wont (unless requested)

  • create a derived class for a single 8x8 matrix.
    • if performance gain is enough?
  • store last set brightness.
    • uint8_t getBrightness()
    • not needed yet

Support

If you appreciate my libraries, you can support the development and maintenance. Improve the quality of the libraries by providing issues and Pull Requests, or donate through PayPal or GitHub sponsors.

Thank you,