GY-63_MS5611/libraries/AGS02MA/AGS02MA.h
2024-02-03 20:45:51 +01:00

147 lines
4.0 KiB
C++

#pragma once
//
// FILE: AGS02MA.h
// AUTHOR: Rob Tillaart, Viktor Balint, Beanow
// DATE: 2021-08-12
// VERSION: 0.4.2
// PURPOSE: Arduino library for AGS02MA TVOC sensor
// URL: https://github.com/RobTillaart/AGS02MA
//
#include "Arduino.h"
#include "Wire.h"
#define AGS02MA_LIB_VERSION (F("0.4.2"))
#define AGS02MA_OK 0
#define AGS02MA_ERROR -10
#define AGS02MA_ERROR_CRC -11
#define AGS02MA_ERROR_READ -12
#define AGS02MA_ERROR_NOT_READY -13
#define AGS02MA_ERROR_REQUEST -14
#define AGS02MA_I2C_CLOCK 25000 // max 30000
class AGS02MA
{
public:
struct RegisterData
{
uint8_t data[4];
uint8_t crc;
bool crcValid;
};
struct ZeroCalibrationData
{
/**
* Warning, the exact meaning of this status is not fully documented.
* It seems like it's a bit mask:
* 0000 1100 | 0x0C | 12 | Typical value
* 0000 1101 | 0x0D | 13 | Sometimes seen on v117
* 0111 1101 | 0x7D | 125 | Seen on v118, after power-off (gives different data than 12!)
*/
uint16_t status;
uint16_t value;
};
// address 26 = 0x1A
explicit AGS02MA(const uint8_t deviceAddress = 26, TwoWire *wire = &Wire);
bool begin();
bool isConnected();
void reset();
bool isHeated() { return (millis() - _startTime) > 120000UL; };
// CONFIGURATION
bool setAddress(const uint8_t deviceAddress);
uint8_t getAddress() { return _address; };
uint8_t getSensorVersion();
uint32_t getSensorDate();
// to set the speed the I2C bus should return to
// as the device operates at very low bus speed of 30 kHz.
void setI2CResetSpeed(uint32_t speed) { _I2CResetSpeed = speed; };
uint32_t getI2CResetSpeed() { return _I2CResetSpeed; };
// to be called after at least 5 minutes in fresh air.
bool zeroCalibration() { return manualZeroCalibration(0); };
/**
* Set the zero calibration value manually.
* To be called after at least 5 minutes in fresh air.
* For v117: 0-65535 = automatic calibration.
* For v118: 0 = automatic calibration, 1-65535 manual calibration.
*/
bool manualZeroCalibration(uint16_t value = 0);
bool getZeroCalibrationData(ZeroCalibrationData &data);
// MODE
bool setPPBMode();
bool setUGM3Mode();
uint8_t getMode() { return _mode; };
// READ functions
uint32_t readPPB(); // parts per billion 10^9
uint32_t readUGM3(); // microgram per cubic meter
// derived read functions
float readPPM() { return readPPB() * 0.001; }; // parts per million
float readMGM3() { return readUGM3() * 0.001; }; // milligram per cubic meter
float readUGF3() { return readUGM3() * 0.0283168466; }; // microgram per cubic feet
float lastPPM() { return _lastPPB * 0.001; };
uint32_t lastPPB() { return _lastPPB; }; // fetch last PPB measurement
uint32_t lastUGM3() { return _lastUGM3; }; // fetch last UGM3 measurement
// STATUS
uint32_t lastRead() { return _lastRead; }; // timestamp last measurement
int lastError();
uint8_t lastStatus() { return _status; };
uint8_t dataReady() { return _status & 0x01; };
// Reading registers
bool readRegister(uint8_t address, RegisterData &reg);
private:
uint32_t _readSensor();
bool _readRegister(uint8_t reg);
bool _writeRegister(uint8_t reg);
uint32_t _I2CResetSpeed = 100000;
uint32_t _startTime = 0;
uint32_t _lastRead = 0;
uint32_t _lastRegTime = 0;
uint32_t _lastPPB = 0;
uint32_t _lastUGM3 = 0;
uint8_t _address = 0;
uint8_t _mode = 255;
uint8_t _status = 0;
uint8_t _buffer[5];
void _setI2CLowSpeed();
void _setI2CHighSpeed();
uint16_t _getDataMSB();
uint16_t _getDataLSB();
uint8_t _CRC8(uint8_t * buf, uint8_t size);
uint8_t _bin2bcd(uint8_t val);
int _error = AGS02MA_OK;
TwoWire* _wire;
};
// -- END OF FILE --