GY-63_MS5611/libraries/PulsePattern
2021-12-24 15:10:06 +01:00
..
.github/workflows 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
examples 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
test 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
.arduino-ci.yml 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
keywords.txt 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
library.json 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
library.properties 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
LICENSE 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
PulsePattern.cpp 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
PulsePattern.h 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00
README.md 0.1.4 PulsePattern 2021-12-24 15:10:06 +01:00

Arduino CI Arduino-lint JSON check License: MIT GitHub release

PulsePattern

Arduino Library to generate repeating pulse patterns AVR ONLY.

Description

This is an experimental library to generate pulse patterns by means of an Arduino UNO. As the library uses AVR hardware timers it is definitely NOT working for ESP or other non-AVR processors.

The library uses timer1 for the timing of the pulses. Therefore the class is implemented with a static instance called PPO. Still by calling init() one can change all parameters of the process. One should note that calling init() forces the timer to stop.

The timer code is based upon the website of Nick Gammon which holds quite a lot of good solid material (Thanks Nick!). https://gammon.com.au/forum/bbshowpost.php?bbtopic_id=123

Use with care.

(there is no active development)

Interface

  • PulsePattern() constructor
  • void init(uint8_t pin, uint16_t*ar, uint8_t size, luint8_t evel, uint8_t prescaler) initializer of the Timer1
    • pin that outputs the pattern
    • array of durations
    • size (or part) of the array to be used
    • starting level HIGH/LOW
    • prescaler, one of the 5 defines from .h file (table below)
  • void setFactor(float perc) percentage = factor to correct timing (relative).
  • float getFactor() get the internal used factor. Due to rounding it can be slightly different.
  • void stop() stop the pattern generator
  • void start() start the pattern generator
  • void cont() continue the pattern generator from the last stopped place (approx).
  • bool isRunning() status indicator
  • void worker() must be public otherwise the ISR cannot call it.

There is some bad understood __vector_11() error when worker() is private.

Prescaler constants

Value Prescaler Timer1 Notes
0 NO_CLOCK timer off
1 PRESCALE_1 clk / 1
2 PRESCALE_8 clk / 8
3 PRESCALE_64 clk / 64
4 PRESCALE_256 clk / 250
5 PRESCALE_1024 clk / 1024 about 1 ms / pulse
6 EXT_T1_FALLING T1 = pin 5 not tested
7 EXT_T2_RISING not tested

Operation

See examples.

Future

  • ESP32 variant of this class (base class -> AVR -> ESP class)
  • pulse recorder class to record / generate patterns

if time permits ...