GY-63_MS5611/libraries/DS1821/DS1821.h
2023-10-25 20:51:31 +02:00

86 lines
2.0 KiB
C++

#pragma once
//
// FILE: DS1821.h
// AUTHOR: Rob Tillaart
// VERSION: 0.3.6
// DATE: 2014-10-05
// PURPOSE: Arduino library for DS1821 temperature sensor
// URL: https://github.com/RobTillaart/DS1821
//
//
// BOTTOM VIEW
//
// PIN MEANING
// /---+
// / o | 1 GND
// | o | 2 DATA
// \ o | 3 VCC
// \---+
#include "Arduino.h"
#include "OneWire.h"
#define DS1821_H_LIB_VERSION (F("0.3.6"))
#define DS1821_RESET_OK 0
#define DS1821_RESET_ERROR -999
class DS1821
{
public:
DS1821(OneWire* ow);
// THERMOMETER MODE
int requestTemperature();
int requestContinuous();
int stopContinuous();
int conversionReady();
float readTemperature();
int error() { int e = _error; _error = 0; return e; };
// High and low temperature 'alarm' flags.
int setLow(int8_t lo);
int getLow();
int setHigh(int8_t hi);
int getHigh();
// flags in configuration register => 1 = triggered since clear
int getHighFlag();
int clrHighFlag();
int getLowFlag();
int clrLowFlag();
// THERMOSTAT CONFIG
// - be sure to read datasheet first!
// - check the example
// - DQ pin must be same the oneWire pin!
int setOneWireMode(uint8_t VDD, uint8_t DQ);
int setPolarity(int activeState); // HIGH or LOW
int getPolarity();
int setThermostatMode();
private:
OneWire * _oneWire;
int _error;
int _reset() { _error = _oneWire->reset(); return _error; };
void _command(uint8_t cmd) { _oneWire->write(cmd); };
uint8_t _readByte() { return _oneWire->read(); };
uint8_t _waitForNVB();
int _getConfigFlag(uint8_t flag);
int _setConfigFlag(uint8_t flag);
int _clrConfigFlag(uint8_t flag);
int _readConfig();
int _writeConfig(uint8_t val);
uint8_t _VDD;
uint8_t _DQ;
};
// -- END OF FILE --