GY-63_MS5611/libraries/HC4052

HC4052

HC4052 is an Arduino library for a HC4052 2 x 4 channel multiplexer.

Description

HC4052 is a library to control the CD74HC4052 8 channel multiplexer / demultiplexer and compatible devices.

The HC4052 allows e.g one analog port read up to 8 different analog channels, or one digital port to read the state of 8 buttons.

The channel selection is done with four select lines A, B, C

The device can be enabled/disabled by the enable line INH

Compatibles

to elaborate.

Related to

• https://github.com/RobTillaart/HC4051 (1x8 mux)
• https://github.com/RobTillaart/HC4052 (2x8 mux)
• https://github.com/RobTillaart/HC4053 (3x2 mux)
• https://github.com/RobTillaart/HC4067 (1x16 mux)

Hardware connection

Typical connection is to connect the four select pins to four IO Pins of your board.

The optional enablePin (INH) must be connected to GND if not used. This way the device is continuous enabled.

Example multiplexing analog in.

        processor                      HC4052
     +-------------+              +-------------+
     |             |              |             |
     |           A |------------->| A        X0 |
     |           B |------------->| B        X1 |
     |      enable |------------->| INH      X2 |
     |             |              |          X3 |
     | analog in   |<-------------| X           |
     |             |              |             |
     | analog in   |<-------------| Y        Y0 |
     |             |              |          Y1 |
     |         GND |--------------| GND      Y2 |
     |             |              | VCC      Y3 |
     |             |              |             |
     +-------------+              +-------------+

Interface

#include "HC4052.h"

Core

• HC4052(uint8_t A, uint8_t B, uint8_t enablePin = 255) constructor. Set the two select pins and optional the enable pin. If the enablePin == 255 it is considered not used.
• void setChannel(uint8_t channel) set the current channel. Valid values 0..3, this value is not checked, only the lower 2 bits will be used.
• uint8_t getChannel() get current channel 0..3.

Enable

These functions work only if enablePin is set in the constructor.

• void enable() idem.
• void disable() idem.
• bool isEnabled() idem. Also returns true if enablePin is not set.

Future

• keep in sync with HC4067 et.al.