GY-63_MS5611/libraries/DHTINT/examples/dhtint_array/dhtint_array.ino
2022-05-08 13:05:13 +02:00

116 lines
2.2 KiB
C++

//
// FILE: dhtint_array.ino
// AUTHOR: Rob Tillaart
// PURPOSE: DHTINT library test sketch for Arduino
// URL: https://github.com/RobTillaart/DHTINT
//
// DHT PIN layout from left to right
// =================================
// FRONT : DESCRIPTION
// pin 1 : VCC
// pin 2 : DATA
// pin 3 : Not Connected
// pin 4 : GND
#include <dhtint.h>
DHTINT kitchen(4);
DHTINT living(5);
DHTINT outside(6);
DHTINT ar[3] = { kitchen, living, outside };
void setup()
{
while(!Serial); // MKR1010 needs this
Serial.begin(115200);
Serial.println("dhtint_array.ino");
Serial.print("DHTINT_LIB_VERSION: ");
Serial.println(DHTINT_LIB_VERSION);
Serial.println();
// MKR1010 needs this
// mySensor.setDisableIRQ(false);
for (int idx = 0; idx < 3; idx++)
{
test(idx);
}
}
void loop()
{
for (int idx = 0; idx < 3; idx++)
{
test(idx);
}
Serial.println();
}
void test(int idx)
{
// READ DATA
uint32_t start = micros();
int chk = ar[idx].read();
uint32_t stop = micros();
Serial.print(idx);
Serial.print(",\t");
switch (chk)
{
case DHTLIB_OK:
Serial.print("OK,\t");
break;
case DHTLIB_ERROR_CHECKSUM:
Serial.print("Checksum error,\t");
break;
case DHTLIB_ERROR_TIMEOUT_A:
Serial.print("Time out A error,\t");
break;
case DHTLIB_ERROR_TIMEOUT_B:
Serial.print("Time out B error,\t");
break;
case DHTLIB_ERROR_TIMEOUT_C:
Serial.print("Time out C error,\t");
break;
case DHTLIB_ERROR_TIMEOUT_D:
Serial.print("Time out D error,\t");
break;
case DHTLIB_ERROR_SENSOR_NOT_READY:
Serial.print("Sensor not ready,\t");
break;
case DHTLIB_ERROR_BIT_SHIFT:
Serial.print("Bit shift error,\t");
break;
case DHTLIB_WAITING_FOR_READ:
Serial.print("Waiting for read,\t");
break;
default:
Serial.print("Unknown: ");
Serial.print(chk);
Serial.print(",\t");
break;
}
// DISPLAY DATA
Serial.print(ar[idx].getHumidity());
Serial.print(",\t");
Serial.print(ar[idx].getTemperature());
Serial.print(",\t");
uint32_t duration = stop - start;
Serial.print(duration);
Serial.print(",\t");
Serial.println(ar[idx].getType());
delay(500);
}
// -- END OF FILE --