GY-63_MS5611/libraries/AD5245
2023-02-03 08:42:59 +01:00
..
.github 0.1.2 AD5245 2023-01-16 14:38:52 +01:00
examples 0.1.0 AD5245 2022-08-03 11:00:56 +02:00
test 0.1.2 AD5245 2023-01-16 14:38:52 +01:00
.arduino-ci.yml 0.1.1 AD5245 2022-10-25 21:41:23 +02:00
AD5245.cpp 0.2.0 AD5245 2023-02-03 08:42:59 +01:00
AD5245.h 0.2.0 AD5245 2023-02-03 08:42:59 +01:00
CHANGELOG.md 0.2.0 AD5245 2023-02-03 08:42:59 +01:00
keywords.txt 0.1.2 AD5245 2023-01-16 14:38:52 +01:00
library.json 0.2.0 AD5245 2023-02-03 08:42:59 +01:00
library.properties 0.2.0 AD5245 2023-02-03 08:42:59 +01:00
LICENSE 0.1.2 AD5245 2023-01-16 14:38:52 +01:00
README.md 0.1.2 AD5245 2023-01-16 14:38:52 +01:00

Arduino CI Arduino-lint JSON check License: MIT GitHub release

AD5245

Arduino library for I2C single channel digital potentiometer AD5245.

The library is experimental and not tested yet.

Description

The AD5245 is a single channel digital potentiometer which comes in 10K, 100K and 1M and can be set in 256 steps.

An important property of the device is that it defaults to the mid position at startup. One can use AD5245_MIDPOINT == 128 to reset to the mid position.

This library is based upon the AD524X library, and triggered by this issue:

I2C address

The AD5245 has one address line to configure the I2C address.

Addr(dec) Addr(Hex) AD0
44 0x2C GND
45 0x2D +5V

Interface

The library has a number of functions which are all quite straightforward. One can get / set the value of the potentiometer.

  • AD5245(uint8_t address, TwoWire *wire = &Wire) constructor
  • bool begin(uint8_t sda, uint8_t scl) ESP32 a.o initializing of Wire.
  • bool begin() for UNO.
  • bool isConnected() See if address set in constructor is on the bus.
  • uint8_t reset() sets potentiometer to midpoint = 128. (startup default)
  • uint8_t write(uint8_t value) set to value 0 .. 255.
  • uint8_t read() read value from cache.
  • uint8_t readDevice() read value from device.
  • uint8_t shutDown() check datasheet, not tested yet, use at own risk.

Error codes

define value
AD5245_OK 0
AD5245_ERROR 100

Operation

The examples show the basic working of the functions.

Future

  • sync with AD520X library
  • sync with AD524X library
    • reset ==> midScaleReset() ? AD524X alike