alex/GY-63_MS5611
1
0
Fork 0
mirror of https://github.com/RobTillaart/Arduino.git synced 2024-10-03 18:09:02 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity
7d5ef73432
GY-63_MS5611/libraries/ADG726
History
Rob Tillaart 7d5ef73432 0.1.0 ADG726
2023-07-25 20:52:51 +02:00
..
.github 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
examples/ADG726_demo 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
test 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
.arduino-ci.yml 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
ADG726.h 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
CHANGELOG.md 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
keywords.txt 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
library.json 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
library.properties 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
LICENSE 0.1.0 ADG726 2023-07-25 20:52:51 +02:00
README.md 0.1.0 ADG726 2023-07-25 20:52:51 +02:00

README.md

Arduino CI Arduino-lint JSON check License: MIT GitHub release

ADG726

Arduino library for ADG726 - 16 to 1 channel (2x) multiplexer.

Description

Experimental

ADG726 is an Arduino class that controls two 16 to 1 multiplexers over a parallel interface. Only one of the 16 channels can be connected at the same time. The channels can be set per multiplexer or together in one call. The library also support to set them all off (17th state).

On power-up, all switches are in the OFF state.

This library can be used e.g. to connect 16 analog devices to one analog port, or to select between 16 DHT22 sensors.

No tests with hardware have been done yet, so use with care. Feedback welcome!

Related

Interface

#include "ADG726.h"
  • ADG726(uint8_t A, uint8_t B, uint8_t C, uint8_t D, uint8_t CSA, uint8_t CSB, uint8_t EN, uint8_t WR) constructor.
  • ADG726(uint8_t address[4], uint8_t CSA, uint8_t CSB, uint8_t EN, uint8_t WR) constructor.
  • void setChannel(uint8_t channel) set the current channel for both A and B. Valid values for channel are 0..15.
  • void setChannelA(uint8_t channel) set the current channel for A only. Valid values for channel are 0..15.
  • void setChannelB(uint8_t channel) set the current channel for B only. Valid values for channel are 0..15.
  • uint8_t getChannelA() get last set channel A == 0..15 or ADG726_ALLOFF.
  • uint8_t getChannelB() get last set channel B == 0..15 or ADG726_ALLOFF.
  • uint8_t channelCount() returns 16 for ADG726.
  • void allOff() sets all channels to OFF, none selected.

Future

Must

  • improve documentation
    • insert schematic
  • test with hardware
  • keep in sync with ADG725 (interface)

Should

  • add examples
  • check performance

Could

Wont