GY-63_MS5611/libraries/ACS712

ACS712 Library

Description

The ACS712 is a chip to measure current, both AC or DC. The chip has an analog output that provides a voltage that is lineair with the current. The ACS712 library supports only a built in ADC by means of analogRead(). There are 2 core functions:

• int mA_DC()
• int mA_AC()

To measure DC current a single analogRead() with some conversion math is sufficient to get a value. To stabilize the signal analogRead() is called twice.

To measure AC current a blocking loop for 20 millis is run to determine the peak to peak value which is converted to the RMS value. To convert the peak2peak value to RMS one need the so called crest or form factor. This factor depends heavily on the signal form. For a perfect sinus the value is sqrt(2)/2.

Test

The library is tested with the RobotDyn ACS712 20A breakout and an Arduino UNO.

Operation

With the constructor the parameters volts and maxADC (steps) of the ADC are set together with the milliVolt per Ampere value. The last parameter can be adjusted afterwards, e.g. to callibrate its value runtime. This parameter affects both AC and DC measurements.

To callibrate the zero level for DC measurements, 4 functions are available to adjust the midPoint.

To callibrate the RMS value for AC measurements, 2 functions are available to get and set the formFactor.

The examples show the basic working of the functions.

Todo

• Test more.
• Determine the crest factor automatically
• ...

Credits

License

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.