GY-63_MS5611/libraries/MCP23S17/MCP23S17.h
2022-04-14 10:53:15 +02:00

104 lines
2.6 KiB
C++

#pragma once
//
// FILE: MCP23S17.h
// AUTHOR: Rob Tillaart
// VERSION: 0.1.3
// PURPOSE: Arduino library for SPI MCP23S17 16 channel port expander
// DATE: 2021-12-30
// URL: https://github.com/RobTillaart/MCP23S17
#include "Arduino.h"
#include "SPI.h"
#define MCP23S17_LIB_VERSION (F("0.1.3"))
#define MCP23S17_OK 0x00
#define MCP23S17_PIN_ERROR 0x81
#define MCP23S17_SPI_ERROR 0x82
#define MCP23S17_VALUE_ERROR 0x83
#define MCP23S17_PORT_ERROR 0x84
#define MCP23S17_INVALID_READ -100
class MCP23S17
{
public:
MCP23S17(uint8_t select, uint8_t dataIn, uint8_t dataOut, uint8_t clock, uint8_t address = 0x00);
MCP23S17(uint8_t select, uint8_t address = 0x00);
bool begin();
bool isConnected(); // needed ?
// single pin interface
// mode = INPUT, OUTPUT or INPUT_PULLUP (==INPUT)
bool pinMode(uint8_t pin, uint8_t mode);
bool digitalWrite(uint8_t pin, uint8_t value);
uint8_t digitalRead(uint8_t pin);
bool setPolarity(uint8_t pin, bool reversed);
bool getPolarity(uint8_t pin, bool &reversed);
bool setPullup(uint8_t pin, bool pullup);
bool getPullup(uint8_t pin, bool &pullup);
// 8 pins interface
// port = 0..1
// value = bit pattern
bool pinMode8(uint8_t port, uint8_t value);
bool write8(uint8_t port, uint8_t value);
int read8(uint8_t port);
bool setPolarity8(uint8_t port, uint8_t mask);
bool getPolarity8(uint8_t port, uint8_t &mask);
bool setPullup8(uint8_t port, uint8_t mask);
bool getPullup8(uint8_t port, uint8_t &mask);
// 16 pins interface
// value = bit pattern
bool pinMode16(uint16_t value);
bool write16(uint16_t value);
uint16_t read16();
bool setPolarity16(uint16_t mask);
bool getPolarity16(uint16_t &mask);
bool setPullup16(uint16_t mask);
bool getPullup16(uint16_t &mask);
// speed in Hz
void setSPIspeed(uint32_t speed);
uint32_t getSPIspeed() { return _SPIspeed; };
// debugging
bool usesHWSPI() { return _hwSPI; };
int lastError();
private:
bool writeReg(uint8_t reg, uint8_t value);
uint8_t readReg(uint8_t reg);
uint8_t _address = 0;
uint8_t _select = 0;
uint8_t _dataOut = 0;
uint8_t _dataIn = 0;
uint8_t _clock = 0;
uint8_t _error = MCP23S17_OK;
bool _hwSPI = false;
uint32_t _SPIspeed = 8000000UL; // 1MHz is a safe value TODO CHECK datasheet
SPIClass * mySPI;
SPISettings _spi_settings;
uint8_t swSPI_transfer(uint8_t val);
};
// -- END OF FILE --