mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
151 lines
4.8 KiB
Markdown
151 lines
4.8 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/pressure/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/pressure/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/pressure/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/pressure/releases)
|
|
|
|
|
|
# pressure
|
|
|
|
Arduino library for pressure conversion.
|
|
|
|
|
|
## Description
|
|
|
|
Simple library to convert between several pressure formats.
|
|
It consists of a number of setters and getters and internally it uses millibar.
|
|
In fact it just hides all conversion constants.
|
|
|
|
Pressure is implemented as a float so this limits the precision of the value.
|
|
|
|
Note: as the conversion is 2 steps the conversion error might be larger than in a single conversion step.
|
|
|
|
Note: constants need to be verified.
|
|
|
|
|
|
## Interface
|
|
|
|
|
|
#### Constructor
|
|
|
|
- **pressure(float value = 0.0)** Constructor, with optional initial value.
|
|
|
|
|
|
#### setters
|
|
|
|
- **void setMilliBar(float value)** sets pressure in milliBar.
|
|
- **void setBar(float value)** sets pressure in bar.
|
|
- **void setPSI(float value)** sets pressure in PSI = Pounds per Square Inch.
|
|
- **void setATM(float value)** sets pressure in Atmosphere.
|
|
- **void setDynes(float value)** sets pressure in Dynes.
|
|
- **void setInchHg(float value)** sets pressure in inches mercury.
|
|
- **void setInchH2O(float value)** sets pressure in inches water.
|
|
- **void setPascal(float value)** sets pressure in Pascal. Note this is the **SI** unit.
|
|
- **void setTORR(float value)** sets pressure in TORR.
|
|
- **void setCmHg(float value)** sets pressure in centimetre mercury.
|
|
- **void setCmH2O(float value)** sets pressure in centimetre water.
|
|
- **void setMSW(float value)** sets pressure in Meters of Sea Water. (under water pressure unit).
|
|
|
|
|
|
#### getters
|
|
|
|
- **float getMilliBar()** returns pressure in milliBar.
|
|
- **float getBar()** returns pressure in bar.
|
|
- **float getPSI()** returns pressure in PSI = Pounds per Square Inch.
|
|
- **float getATM()** returns pressure in Atmosphere.
|
|
- **float getDynes()** returns pressure in Dynes.
|
|
- **float getInchHg()** returns pressure in inches mercury.
|
|
- **float getInchH2O()** returns pressure in inches water.
|
|
- **float getPascal()** returns pressure in Pascal. Note this is the **SI** unit.
|
|
- **float getTORR()** returns pressure in TORR.
|
|
- **float getCmHg()** returns pressure in centimetre mercury.
|
|
- **float getCmH2O()** returns pressure in centimetre water.
|
|
- **float getMSW()** returns pressure in Meters of Sea Water. (under water pressure unit).
|
|
|
|
|
|
#### Gas law (experimental see below)
|
|
|
|
- **change(float T1, float T2, float V1 = 1, float V2 = 1, float N1 = 1, float N2 = 1)**
|
|
apply changing temperature (**Kelvin**), volume (m3) and moles. If an parameter does not change
|
|
just fill in the value 1 for both before and after.
|
|
|
|
|
|
#### constants
|
|
|
|
The library has a number of constants to convert units.
|
|
These constants can be used to write specific convertors or define specific constants.
|
|
|
|
A dedicated conversion is faster as it has only one float multiplication runtime.
|
|
|
|
|
|
```cpp
|
|
inline float PSI2MSW(float value)
|
|
{
|
|
return value * (PSI2MILLIBAR * MILLIBAR2MSW);
|
|
}
|
|
```
|
|
|
|
or
|
|
```cpp
|
|
#define PSI2MSW (PSI2MILLIBAR * MILLIBAR2MSW)
|
|
...
|
|
float out = in * (PSI2MSW);
|
|
```
|
|
|
|
|
|
|
|
## Operation
|
|
|
|
```cpp
|
|
pressure P;
|
|
|
|
...
|
|
|
|
P.setDynes(1000);
|
|
Serial.print("mBar: ");
|
|
Serial.println(P.getMilliBar()); // 1000 Dynes in mBar
|
|
Serial.print("TORR: ");
|
|
Serial.println(P.getTORR()); // 1000 Dynes in Torr
|
|
```
|
|
|
|
#### Obsolete
|
|
|
|
Version 0.1.0 has incorrect setters. fixed in version 0.2.0.
|
|
|
|
|
|
#### Experimental 0.2.1
|
|
|
|
Apply the ideal gas law : **PxV / nxT = Constant**
|
|
|
|
- **void change(float T1, float T2, float V1, float V2, float N1, float N2)**
|
|
- T (temperature) in Kelvin,
|
|
- V (volume) in identical units,
|
|
- N (# atoms) in mole
|
|
- **void changeT(float T1, float T2)** only change temperature. T in Kelvin.
|
|
- **void changeV(float V1, float V2)** only change volume.
|
|
- **void changeN(float N1, float N2)** only change moles.
|
|
|
|
in code
|
|
```cpp
|
|
pressure P;
|
|
P.setPressure(...);
|
|
P.change(T1, T2, V1, V2, N1, N2); // apply all changes.
|
|
x = P.getPressure()
|
|
```
|
|
|
|
- do we need a **changeTC(float T1, float T2)** only change temperature, T in Celsius
|
|
- should functions return bool true on success ?
|
|
|
|
Kelvin = Celsius + 273.15;
|
|
Kelvin = (Fahrenheit - 32) \* 5 / 9 + 273.15;
|
|
Kelvin = Fahrenheit \* 5 / 9 + 290.93; // one operator less.
|
|
|
|
|
|
## Future
|
|
|
|
- update documentation
|
|
- find a good reference for conversion formula constants.
|
|
- test with gas law.
|
|
|