mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
65 lines
1.3 KiB
C++
65 lines
1.3 KiB
C++
//
|
|
// FILE: MS5611_test.ino
|
|
// AUTHOR: Rob Tillaart
|
|
// PURPOSE: demo application
|
|
// DATE: 2014-okt-16
|
|
// URL: https://github.com/RobTillaart/MS5611
|
|
|
|
|
|
#include "MS5611.h"
|
|
|
|
|
|
MS5611 MS5611(0x77); // 0x76 = CSB to VCC; 0x77 = CSB to GND
|
|
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
Serial.print(__FILE__);
|
|
Serial.print("MS5611_LIB_VERSION: ");
|
|
Serial.println(MS5611_LIB_VERSION);
|
|
|
|
if (MS5611.begin() == true)
|
|
{
|
|
Serial.println("MS5611 found.");
|
|
}
|
|
else
|
|
{
|
|
Serial.println("MS5611 not found. halt.");
|
|
while(1);
|
|
}
|
|
/*
|
|
There are 5 oversampling settings, each corresponding to a different amount of milliseconds
|
|
The higher the oversampling, the more accurate the reading will be, however the longer it will take.
|
|
OSR_ULTRA_HIGH -> 10 millis
|
|
OSR_HIGH -> 5 millis
|
|
OSR_STANDARD -> 3 millis
|
|
OSR_LOW -> 2 millis
|
|
OSR_ULTRA_LOW -> 1 millis Default = backwards compatible
|
|
*/
|
|
MS5611.setOversampling(OSR_ULTRA_HIGH);
|
|
}
|
|
|
|
|
|
void loop()
|
|
{
|
|
int result = MS5611.read();
|
|
if (result != MS5611_READ_OK)
|
|
{
|
|
Serial.print("Error in read: ");
|
|
Serial.println(result);
|
|
}
|
|
else
|
|
{
|
|
Serial.print("\nT:\t");
|
|
Serial.print(MS5611.getTemperature(), 2);
|
|
Serial.print("\tP:\t");
|
|
Serial.print(MS5611.getPressure(), 2);
|
|
}
|
|
delay(1000);
|
|
}
|
|
|
|
|
|
// -- END OF FILE --
|
|
|