mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
164 lines
4.5 KiB
C++
164 lines
4.5 KiB
C++
#pragma once
|
||
//
|
||
// FILE: BH1750FVI.h
|
||
// AUTHOR: Rob dot Tillaart at gmail dot com
|
||
// VERSION: 0.2.9
|
||
// PURPOSE: Arduino library for BH1750FVI (GY-30) lux sensor
|
||
// HISTORY: See BH1750FVI.cpp
|
||
//
|
||
|
||
|
||
// breakout BH1750FVI / GY-30
|
||
//
|
||
// +-----------------------+
|
||
// GND |o |
|
||
// ADD |o |
|
||
// SDA |o + | + = sensor
|
||
// SCL |o |
|
||
// VCC |o |
|
||
// +-----------------------+
|
||
//
|
||
// ADD = ADDRESS:
|
||
// 0 = 0x23
|
||
// 1 = 0x5C
|
||
//
|
||
|
||
|
||
#include "Wire.h"
|
||
#include "Arduino.h"
|
||
|
||
|
||
#define BH1750FVI_LIB_VERSION (F("0.2.9"))
|
||
|
||
|
||
#define BH1750FVI_DEFAULT_ADDRESS 0x23
|
||
#define BH1750FVI_ALT_ADDRESS 0x5C
|
||
|
||
|
||
// COMMANDS P5
|
||
#define BH1750FVI_POWER_ON 0x00
|
||
#define BH1750FVI_POWER_OFF 0x01
|
||
#define BH1750FVI_RESET 0x07
|
||
#define BH1750FVI_CONT_HIGH 0x10
|
||
#define BH1750FVI_CONT_HIGH2 0x11
|
||
#define BH1750FVI_CONT_LOW 0x13
|
||
#define BH1750FVI_ONCE_HIGH 0x20
|
||
#define BH1750FVI_ONCE_HIGH2 0x21
|
||
#define BH1750FVI_ONCE_LOW 0x23
|
||
|
||
#define BH1750FVI_REFERENCE_TIME 0x45 // 69
|
||
|
||
#define BH1750FVI_MODE_LOW 0x00
|
||
#define BH1750FVI_MODE_HIGH 0x01
|
||
#define BH1750FVI_MODE_HIGH2 0x02
|
||
|
||
|
||
// ERROR CODES
|
||
#define BH1750FVI_OK 0
|
||
#define BH1750FVI_ERROR_WIRE_REQUEST -10
|
||
|
||
|
||
class BH1750FVI
|
||
{
|
||
public:
|
||
|
||
#if defined(ESP8266) || defined(ESP32)
|
||
// dataPin and clockPin can be used for ESP8266
|
||
BH1750FVI(const uint8_t address , const uint8_t dataPin, const uint8_t clockPin);
|
||
#endif
|
||
|
||
BH1750FVI(const uint8_t address, TwoWire *wire = &Wire);
|
||
// returns true if isConnected()
|
||
bool begin(); // resets to constructor defaults. (use with care)
|
||
|
||
bool isConnected(); // returns true if address is on I2C bus
|
||
|
||
|
||
float getRaw(); // no HIGH2 mode + no sensitivity factor.
|
||
float getLux();
|
||
int getError();
|
||
|
||
|
||
void powerOn() { command(BH1750FVI_POWER_ON); };
|
||
void powerOff() { command(BH1750FVI_POWER_OFF); };
|
||
void reset() { command(BH1750FVI_RESET); };
|
||
|
||
|
||
// MODE TIME RESOLUTION
|
||
// 2 HIGH2 120 ms 0.5 lux // recommended max * 1.5 = 180 ms
|
||
// 1 HIGH 120 ms 1.0 lux
|
||
// 0 LOW 16 ms 4.0 lux
|
||
uint8_t getMode() { return _mode; };
|
||
|
||
|
||
void setContHighRes();
|
||
void setContHigh2Res();
|
||
void setContLowRes();
|
||
|
||
|
||
void setOnceHighRes();
|
||
void setOnceHigh2Res();
|
||
void setOnceLowRes();
|
||
bool isReady(); // only after setOnce...Res();
|
||
|
||
|
||
// read datasheet P11 about details of the correction or sensitivity factor
|
||
// to be used for very high and very low brightness
|
||
// or to correct for e.g. transparency
|
||
void changeTiming(uint8_t time = BH1750FVI_REFERENCE_TIME); // 69 is default
|
||
// returns changeTiming() parameter
|
||
|
||
|
||
uint8_t setCorrectionFactor(float factor = 1); // 0.45 .. 3.68
|
||
// returns percentage set.
|
||
float getCorrectionFactor();
|
||
|
||
|
||
// read datasheet P3 and check figure 4 and 5.
|
||
// setAngle is constrained to -89..+89
|
||
// returns the angle correction factor
|
||
float setAngle(int degrees = 0);
|
||
int getAngle() { return _angle; };
|
||
|
||
|
||
// datasheet P3 figure 7
|
||
// Effect of temperature is about 3% / 60<36>C ~~ 1% / 20<32>C
|
||
// to be used if temp is really hot or cold.
|
||
// returns the temperature correction factor
|
||
float setTemperature(int temp = 20);
|
||
int getTemperature() { return _temp; };
|
||
|
||
|
||
// datasheet Page 3 figure 1 (experimental correction)
|
||
// Effect of wavelength can be substantial,
|
||
// correction is calculated by multiple linear approximations.
|
||
// wavelength of 580 ==> correction == 1
|
||
// returns the wavelength correction factor
|
||
float setWaveLength(int waveLength = 580);
|
||
int getWaveLength() { return _waveLength; };
|
||
|
||
|
||
private:
|
||
uint16_t readData();
|
||
void command(uint8_t value);
|
||
|
||
uint8_t _address;
|
||
uint16_t _data;
|
||
int _error;
|
||
uint8_t _sensitivityFactor;
|
||
uint8_t _mode;
|
||
|
||
uint32_t _requestTime = 0;
|
||
float _angleFactor = 1;
|
||
int _angle = 0;
|
||
float _tempFactor = 1;
|
||
int _temp = 20;
|
||
float _waveLengthFactor = 1;
|
||
int _waveLength = 580;
|
||
|
||
TwoWire* _wire;
|
||
};
|
||
|
||
|
||
// -- END OF FILE --
|