GY-63_MS5611/libraries/MCP23008
2023-12-10 14:28:53 +01:00
..
.github 0.1.3 MCP23008 2023-02-04 14:40:35 +01:00
documents 0.1.0 MCP23008 2022-01-10 12:51:36 +01:00
examples 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
test 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
.arduino-ci.yml 0.1.2 MCP23008 2022-11-17 16:12:58 +01:00
CHANGELOG.md 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
CMakeLists.txt 0.1.5 MCP23008 2023-09-23 20:13:03 +02:00
keywords.txt 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
library.json 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
library.properties 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
LICENSE 0.1.3 MCP23008 2023-02-04 14:40:35 +01:00
MCP23008.cpp 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
MCP23008.h 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00
README.md 0.2.0 MCP23008 2023-12-10 14:28:53 +01:00

Arduino CI Arduino-lint JSON check GitHub issues

License: MIT GitHub release PlatformIO Registry

MCP23008

Arduino library for MCP23008 8 channel I2C port expander.

Description

This library gives easy control over the 8 pins of a (I2C) MCP23008 chip.

This IC is strongly related tot the MCP23017 I2C port expander - https://github.com/RobTillaart/MCP23017_RT Programming Interface is kept the same as much as possible.

Since 0.1.1 the digitalWrite(pin, value) is optimized. If a pin is not changed it will not be written again to save time.

0.2.0 Breaking change

Version 0.2.0 introduced a breaking change. You cannot set the pins in begin() any more. This reduces the dependency of processor dependent Wire implementations. The user has to call Wire.begin() and can optionally set the Wire pins before calling begin().

16 bit port expanders

8 bit port expanders

Interface

#include "MCP23008.h"

Constructor

  • MCP23008(uint8_t address, TwoWire *wire = &Wire) constructor, with default Wire interface.
    Can be overruled with Wire0..WireN.
  • bool begin() initializes library. Returns true upon success.
  • bool isConnected() returns true if connected, false otherwise.
  • uint8_t getAddress() returns address set in the constructor.

Single pin interface

  • bool pinMode(uint8_t pin, uint8_t mode) pin = 0..7, mode = INPUT, OUTPUT. 0xFF is all pins are input, 0x1F are 5 inputs and 3 outputs. Returns true if successful.
  • bool digitalWrite(uint8_t pin, uint8_t value) pin = 0..7, value = LOW(0) HIGH (!0). Returns true if successful.
  • uint8_t digitalRead(uint8_t pin) pin = 0..7, returns LOW or HIGH, might set the lastError();
  • bool setPolarity(uint8_t pin, bool reversed) pin = 0..7, set reversed flag. Returns true if successful.
  • bool getPolarity(uint8_t pin, bool &reversed) pin = 0..7, reads reversed flag. Returns true if successful.
  • bool setPullup(uint8_t pin, bool pullup) pin = 0..7, set pull-up flag. Returns true if successful.
  • bool getPullup(uint8_t pin, bool &pullup) pin = 0..7, reads pull-up flag. Returns true if successful.

8 pins interface

  • bool pinMode8(uint8_t value) value = 0..255. Returns true if successful.
  • bool write8(uint8_t value) value = 0..255. Returns true if successful.
  • uint8_t read8() reads 8 pins into one byte.
  • bool setPolarity8(uint8_t mask) sets polarity for 8 channels at once. Returns true if successful.
  • bool getPolarity8(uint8_t &mask) reads polarity of 8 channels at once. Returns true if successful.
  • bool setPullup8(uint8_t mask) sets pull-up for 8 channels at once. Returns true if successful.
  • bool getPullup8(uint8_t &mask) reads pull-up for 8 channels at once. Returns true if successful.

Error codes

If one of the above functions return false, there might be an error.

  • int lastError() Above functions set an error flag that can be read with this function.
    Reading it will reset the flag to MCP23008_OK.
DESCRIPTION VALUE
MCP23008_OK 0x00
MCP23008_PIN_ERROR 0x81
MCP23008_I2C_ERROR 0x82
MCP23008_VALUE_ERROR 0x83
MCP23008_PORT_ERROR 0x84

Operation

See examples.

Future

Must

  • improve documentation

Should

  • keep in sync with MCP23017

Could

Wont

Support

If you appreciate my libraries, you can support the development and maintenance. Improve the quality of the libraries by providing issues and Pull Requests, or donate through PayPal or GitHub sponsors.

Thank you,