GY-63_MS5611/libraries/SRF05
2022-08-03 21:56:07 +02:00
..
.github add funding.yml 2022-08-03 21:56:07 +02:00
examples 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
test 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
.arduino-ci.yml 0.1.1 SRF05 2021-11-18 13:52:59 +01:00
keywords.txt 0.1.1 SRF05 2021-11-18 13:52:59 +01:00
library.json 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
library.properties 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
LICENSE 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
README.md 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
SRF05.cpp 0.1.2 SRF05 2021-12-28 15:09:27 +01:00
SRF05.h 0.1.2 SRF05 2021-12-28 15:09:27 +01:00

Arduino CI Arduino-lint JSON check License: MIT GitHub release

SRF05

Arduino library for the SRF05 distance sensor and compatibles.

Description

The library allows to adjust to the speed of sound. Reasons to use a different value are temperature, humidity, type of gas, composition etc.

Default value for the speed of sound is set to 343 m/s. (~20°C)

Several correction formulas for the speed of sound are available on the internet.

// temperature in °C
v = 331.3 + 0.606 * temperature (m/s)
v = 331.4 + 0.606 * temperature + 0.0124 * rel_humidity (m/s)
v = 20.05 * sqrt(273.16 + temperature) (m/s)

In fact humidity has an effect which increases with temperature so the formula is more complex See - https://forum.arduino.cc/t/ultrasonic-sensor-to-determine-water-level/64890/12

temp 10% 20% 30% 40% 50% 60% 70% 80% 90% notes
-30 313.5 329.5 312.9 329.6 313.0 329.6 313.1 329.7 329.7 extrapolated indication
-25 316.5 332.6 316.0 332.7 316.1 332.7 316.2 332.8 332.9 extrapolated indication
-20 319.5 335.6 319.1 335.7 319.2 335.9 319.3 336.0 336.0 extrapolated indication
-15 322.5 330.5 322.2 330.6 322.3 330.6 322.4 330.7 330.7 extrapolated indication
-10 325.5 333.6 325.3 333.7 325.4 333.7 325.5 333.8 333.9 extrapolated indication
-5 328.5 336.6 328.4 336.7 328.5 336.9 328.6 337.0 337.0 extrapolated indication
0 331.5 331.5 331.5 331.6 331.6 331.6 331.7 331.7 331.7
5 334.5 334.6 334.6 334.7 334.7 334.7 334.8 334.8 334.9
10 337.5 337.6 337.7 337.7 337.8 337.9 337.9 338.0 338.0
15 340.5 340.6 340.7 340.8 340.9 341.0 341.1 341.2 341.2
20 343.5 343.6 343.7 343.9 344.0 344.1 344.2 344.4 344.5
25 346.4 346.6 346.8 347.0 347.1 347.3 347.5 347.6 347.8
30 349.4 349.6 349.9 350.1 350.3 350.5 350.8 351.0 351.2
35 352.4 352.6 353.0 353.2 353.5 353.7 354.1 354.4 354.6 extrapolated indication
40 355.4 355.6 356.1 356.3 356.7 356.9 357.4 357.8 358.0 extrapolated indication
45 358.4 358.6 359.2 359.4 359.9 360.1 360.7 361.2 361.4 extrapolated indication
50 361.4 361.6 362.3 362.5 363.1 363.3 364.0 364.6 364.8 extrapolated indication
55 364.4 364.6 365.4 365.6 366.3 366.5 367.3 368.0 368.2 extrapolated indication
60 367.4 367.6 368.5 368.7 369.5 369.7 370.6 371.4 371.6 extrapolated indication

(table based upon https://www.engineeringtoolbox.com/air-speed-sound-d_603.html)

The library has several ways to improve the quality of the measurements. By taking the average or the median of multiple readings.

The library allows to set a correction factor to compensate for the timing of the pulseIn() function. This has in the end the same effect as changing the speed of sound however it is technically more correct to split the two.

Interface

  • SRF05(const uint8_t trigger, const uint8_t echo, const uint8_t out = 0) constructor to set the trigger and echo pin. It is not clear yet what the purpose of the OUT pin is.

Configuration

  • void setSpeedOfSound(float sos) adjust the speed of sound.
  • float getSpeedOfSound() return set value.
  • void setCorrectionFactor(float cf = 1) adjust the timing by a few percentage e.g. to adjust clocks. Should not be used to correct the speed of sound :)
  • float getCorrectionFactor() returns the current correction factor.

normally a single read should be OK.

  • void setModeSingle() read single time.
  • void setModeAverage(uint8_t count) read cnt times and take the average.
  • void setModeMedian(uint8_t count) read cnt times and take the median. cnt = 3..15
  • void setModeRunningAverage(float alpha) use a running average algorithm with a weight (depends on your application).
  • uint8_t getOperationalMode() returns the operational mode 0..3.
mode meaning
0 single
1 average
2 median
3 running average
other error

Get distance

  • uint32_t getTime() returns distance in microseconds.
  • uint32_t getMillimeter() returns distance in millimeter.
  • float getCentimeter() returns distance in centimeter.
  • float getMeter() returns distance in meter.
  • float getInch() returns distance in inches. (1 inch = 2.54 cm).
  • float getFeet() returns distance in feet. (1 feet = 12 inch).

Experimental - calibration

Experimental, put the sensor at exactly 1.00 meter from a wall, and based upon the timing it will give an estimate for the speed of sound. Current version seems accurate within 3 - 5 %.

  • float determineSpeedOfSound()

Need to compensate for temperature and humidity.

Experimental - configuration

Performance

Assumes default speed of sound of 340 m/sec. Distance is in meters and equals total distance (forth and back).

Distance time (us)
1 2.94
2 5.88
5 14.71
10 29.41
20 58.82
50 147.06
100 294.12
200 588.24
300 882.35
400 1176.47

Operational

See examples..

Future

  • print feet as 3'2" or 3-7/8 feet (is that needed in this lib)
  • enumerate mode operandi.
  • investigate purpose of the OUT pin.
  • example sketch with a DHT22 and the formula for SOS
  • fix magic conversion numbers.
  • add float calcSOS(float temp, float humidity = 0);
  • add float lastValue() ? not all paths update this variable.
  • add float delta() difference with last value. how to handle different units? or only time?
  • set default SOS to an SOS from the table iso 340.
  • add setTriggerLength()