alex/GY-63_MS5611
1
0
Fork 0
mirror of https://github.com/RobTillaart/Arduino.git synced 2024-10-03 18:09:02 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity
2d93065d5e
GY-63_MS5611/libraries/DAC8552
History
Rob Tillaart efae7d205f 0.3.0 DAC8552
2023-12-02 10:38:46 +01:00
..
.github 0.2.4 DAC8552 + github actions 2023-02-09 11:34:34 +01:00
examples 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
test 0.2.3 DAC8552 2021-12-15 12:48:53 +01:00
.arduino-ci.yml 0.2.4 DAC8552 2022-10-31 16:47:29 +01:00
CHANGELOG.md 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
DAC8552.cpp 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
DAC8552.h 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
keywords.txt 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
library.json 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
library.properties 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00
LICENSE 0.2.4 DAC8552 + github actions 2023-02-09 11:34:34 +01:00
README.md 0.3.0 DAC8552 2023-12-02 10:38:46 +01:00

README.md

Arduino CI Arduino-lint JSON check GitHub issues

License: MIT GitHub release PlatformIO Registry

DAC8552

Arduino library for DAC8552 SPI Digital Analog Convertor.

Description

The DAC8552 is a SPI based 16 bit DAC with two channels.

Warning This library is not tested extensively.

0.3.0 Breaking change

The version 0.3.0 has breaking changes in the interface. The essence is removal of ESP32 specific code from the library. This makes it possible to support the ESP32-S3 and other processors in the future. Also it makes the library a bit simpler to maintain.

Note order of parameters changed.

Related

Interface

#include "DAC8552.h"

Core

  • DAC8552(uint8_t select, SPIClassRP2040 * spi = &SPI) Constructor HW SPI RP2040.
  • DAC8552(uint8_t select, SPIClass * spi = &SPI) Constructor HW SPI other.
  • DAC8552(uint8_t select, uint8_t spiData, uint8_t spiClock) Constructor SW SPI.
  • DAC8532(...) idem constructors for DAC8532.
  • void begin() initializes all pins to default state
  • void bufferValue(uint8_t channel, uint16_t value)
  • void setValue(uint8_t channel, uint16_t value) set the value of the chosen channel to 0 - 65535
  • **uint16_t getValue(uint8_t channel)**returns the last value written.

Hardware SPI

To be used only if one needs a specific speed.

  • void setSPIspeed(uint32_t speed) set SPI transfer rate.
  • uint32_t getSPIspeed() returns SPI transfer rate.
  • bool usesHWSPI() returns true if HW SPI is used.

Power down

Check datasheet for details.

  • void bufferPowerDown(uint8_t channel, uint8_t powerDownMode) ets power down mode. 0 - 3, but waits until (TODO CHECK DATASHEET)
  • void setPowerDown(uint8_t channel, uint8_t powerDownMode) sets power down mode. 0 - 3.
  • uint8_t getPowerDownMode(uint8_t channel) returns last written mode.
Power down mode Value
DAC8552_POWERDOWN_NORMAL 0
DAC8552_POWERDOWN_1K 1
DAC8552_POWERDOWN_100K 2
DAC8552_POWERDOWN_HIGH_IMP 3

Operation

See examples

demo_hw_spi.ino

  • write a sawtooth to channel A followed by a sinus
  • uses HW SPI

demo_sw_spi.ino

  • write a sawtooth to channel A followed by a sinus
  • uses SW SPI

demo_same_time_write.ino

  • writes two square waves that trigger at the same time

demo_sequential_write.ino

  • writes two square waves sequentially (slight time difference)

demo_powerdown.ino

  • idem

Future

Must

  • improve documentation
  • testing with hardware

Should

Could

  • performance measurements

Wont

Support

If you appreciate my libraries, you can support the development and maintenance. Improve the quality of the libraries by providing issues and Pull Requests, or donate through PayPal or GitHub sponsors.

Thank you,