alex/GY-63_MS5611
1
0
Fork 0
mirror of https://github.com/RobTillaart/Arduino.git synced 2024-10-03 18:09:02 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity
251c8a5e08
GY-63_MS5611/libraries/DAC8554
History
rob tillaart d43678fae3 0.2.5 DAC8554 + github actions
2023-02-09 11:35:15 +01:00
..
.github 0.2.5 DAC8554 + github actions 2023-02-09 11:35:15 +01:00
examples 0.2.4 DAC8554 2021-12-15 14:57:49 +01:00
test 0.2.4 DAC8554 2021-12-15 14:57:49 +01:00
.arduino-ci.yml 0.2.5 DAC8554 2022-10-31 16:49:34 +01:00
CHANGELOG.md 0.2.5 DAC8554 2022-10-31 16:49:34 +01:00
DAC8554.cpp 0.2.5 DAC8554 2022-10-31 16:49:34 +01:00
DAC8554.h 0.2.5 DAC8554 2022-10-31 16:49:34 +01:00
keywords.txt 0.2.4 DAC8554 2021-12-15 14:57:49 +01:00
library.json 0.2.5 DAC8554 2022-10-31 16:49:34 +01:00
library.properties 0.2.5 DAC8554 2022-10-31 16:49:34 +01:00
LICENSE 0.2.5 DAC8554 + github actions 2023-02-09 11:35:15 +01:00
README.md 0.2.4 DAC8554 2021-12-15 14:57:49 +01:00

README.md

Arduino CI Arduino-lint JSON check License: MIT GitHub release

DAC8554

Arduino library for DAC8554 SPI Digital Analog Convertor.

Description

The DAC8554 is a SPI based 16 bit DAC with four channels.

Warning This library is not tested extensively

Interface

Core

  • DAC8554(uint8_t slaveSelect, uint8_t address = 0) Constructor for hardware SPI, since 0.2.0 the slaveSelect pin needs to be defined.
  • DAC8554(uint8_t spiData, uint8_t spiClock, uint8_t slaveSelect, uint8_t address = 0) Constructor for the software SPI
  • void begin() initializes all pins to default state
  • void setValue(uint8_t channel, uint16_t value) set the value of the channel to 0 - 65535
  • void setSingleValue(uint8_t channel, uint16_t value) writes the value to the channel but does not affect buffered ones. TODO - elaborate.
  • uint16_t getValue(uint8_t channel) returns the last value written.

Hardware SPI

To be used only if one needs a specific speed.

  • void setSPIspeed(uint32_t speed) set SPI transfer rate.
  • uint32_t getSPIspeed() returns SPI transfer rate.
  • bool usesHWSPI() returns true if HW SPI is used.

ESP32 specific

  • void selectHSPI() in case hardware SPI, the ESP32 has two options HSPI and VSPI.
  • void selectVSPI() see above.
  • bool usesHSPI() returns true if HSPI is used.
  • bool usesVSPI() returns true if VSPI is used.

The selectVSPI() or the selectHSPI() needs to be called BEFORE the begin() function.

experimental

  • void setGPIOpins(uint8_t clk, uint8_t miso, uint8_t mosi, uint8_t select) overrule GPIO pins of ESP32 for hardware SPI. Needs to be called AFTER the begin() function.

Power down

Check datasheet for details.

  • void setPowerDown(uint8_t powerDownMode) sets power down mode. 0 - 3.
  • uint8_t getPowerDownMode() returns last written mode.
  • void setSinglePowerDown(uint8_t channel, uint8_t powerDownMode) does not affect other channels.
Power down mode Value
DAC8554_POWERDOWN_NORMAL 0x00
DAC8554_POWERDOWN_1K 0x40
DAC8554_POWERDOWN_100K 0x80
DAC8554_POWERDOWN_HIGH_IMP 0xC0

Broadcast

  • void bufferValue(uint8_t channel, uint16_t value) prepare a new value for a channel.
  • void broadcastBuffer() write all buffers to all(up to 4) 8554's channel's.
  • void broadcastValue(uint16_t value) write value to all(up to 4) 8554's channel's.
  • void broadcastPowerDown(uint8_t powerDownMode) write powerDownMode to all 8554's channel's.

Operation

See examples

demo_hw_spi.ino

  • write a sawtooth to channel A followed by a sinus
  • uses HW SPI

demo_sw_spi.ino

  • write a sawtooth to channel A followed by a sinus
  • uses SW SPI

demo_same_time_write.ino

  • writes two square waves that trigger at the same time

demo_sequential_write.ino

  • writes two square waves sequentially (slight time difference)

demo_powerdown.ino

  • idem

Future

  • testing